Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    Stock audit glossary · Counting methods

    Physical Verification

    noun · in Hindi, भौतिक सत्यापन (bhautik satyapan)

    Definition

    Physical verification means checking, by actually seeing and counting, that the stock or assets in the books really exist, in the quantity, condition and place the records show. It is different from reconciliation, which only compares one record with another and can be done from a desk. In a stock audit it is the step that turns a figure in the register into evidence.

    • Reviewed by CA Sundram Gupta · Chartered Accountant
    • Last reviewed 23 October 2026
    • 7 min read

    See related terms

    At a glance

    Checks
    Quantity, condition and place Not presence alone
    Runs both ways
    Record to goods, goods to record Only the second finds unrecorded stock
    Works from
    Records frozen at a cut-off So the figures do not move mid-count
    Company audits
    CARO 2020, clause 3(ii)(a) The auditor reports on it
    Reported
    By location and by value Never as one netted total

    Meaning

    01 What physical verification is

    A stock record is only a claim. A system that has been told an item exists will keep reporting it whether or not the item is still on the rack. Someone has to go and look, and physical verification is that visit: the goods are counted, inspected and located, and the result is compared with the books.

    It checks more than presence. Damaged or unsaleable goods do not support their book value, and an item nobody can find is not available, whatever the record says. It also works in two directions. Going from the record to the goods finds what has gone missing; going from the goods to the record finds what was never entered. Only the second direction catches goods received but never booked.

    On the day

    02 What physical verification means at the count

    Verification is a record of what was seen, not of what was reported.

    What the counter records

    • Quantity at each location. Counted against a copy of the records frozen before the count began.
    • Condition. Damaged, expired or obsolete goods, which only someone standing in front of them can see.
    • Anything unresolved. Marked as open on the sheet, never guessed, and recounted before the sheets close.

    What does not count as verification

    • A system report printed on the day. It repeats what was entered and proves nothing about the shelf.
    • A count by the custodian alone. The people answerable for the stock cannot be its only check.
    • Matching two records. Agreeing the register to the ledger is reconciliation, not verification.
    The test is first-hand sight. If nobody independent saw the goods, the stock was not physically verified.

    In practice

    03 How physical verification works in practice

    CountedBookDifference
    Input Where it comes from Sample (units)
    Book quantity The register, frozen at the cut-off 4,180
    Counted quantity The count sheet, signed on the day 4,166
    Difference to explain Recounted, then traced or reported −14

    4,166 − 4,180 = −14 units. A difference is recounted before it is accepted, and valued before it is reported. Sample figures for illustration only.

    Five steps, in order

    1. Freeze the records

      Take a copy of the stock records at a cut-off date, so the figures do not change while the work goes on.

    2. Choose what to check

      Give most weight to high-value items, which are often checked in full.

    3. Count in both directions

      From the records to the goods, and from the goods back to the records.

    4. Record condition and place

      Note condition, location and custodian at the same time as the quantity.

    5. Recount, reconcile, report

      Recount differences, reconcile to the frozen records and report anything unresolved with its value.

    Worked example

    04 Four locations that net to nothing

    Sample figures; no client is described.

    An electricals plant counted in one day, with the stores frozen from the evening before
    Location Book / counted Difference
    Main store 4,180 / 4,166 −14 units, ₹1,26,000
    Bonded area 900 / 900 Nil
    Shop floor (work in progress) 610 / 648 +38 units, ₹2,58,000
    Despatch bay 320 / 296 −24 units, ₹2,16,000

    A clean total can hide three real differences

    Added together, the four lines show no difference in units at all (−14 + 0 + 38 − 24 = 0) and a net shortage of only ₹84,000. Read line by line, they show a surplus on the shop floor next to a shortage at the despatch bay, which usually means goods were moved but the movement was never posted.

    That is why each location is reported separately, and by value as well as quantity. A netted figure would have closed the count without anyone asking where the despatch-bay goods went.

    Framework

    05 Physical verification under CARO 2020

    No statute sets a fixed timetable for counting stock. For companies covered by the Companies (Auditor’s Report) Order, 2020 (CARO 2020), the auditor reports on whether management verified inventory, how well and how often. The duty to verify sits with management; the duty to report sits with the auditor.

    Verified

    No fixed timetable

    No statute fixes how often inventory must be counted; CARO 2020 asks whether it was verified at reasonable intervals.

    CARO 2020 (MCA order)
    Verified

    Coverage and procedure

    Under clause 3(ii)(a) the auditor reports whether the coverage and procedure of management’s verification were appropriate.

    CARO 2020 (MCA order)
    Verified

    Differences of 10% or more

    The auditor reports whether discrepancies of 10% or more in aggregate for each class of inventory were noticed and properly dealt with in the books.

    CARO 2020 (MCA order)

    Watch out

    06 Common mistakes with physical verification

    Most failed verifications were counted, just not counted properly.

    Checking in one direction only

    Going from records to goods never finds stock that was never entered.

    Also trace a sample from the floor back to the records.

    Counting against moving records

    Receipts and issues posted during the count make the book figure a moving target.

    Freeze the records at a cut-off before counting starts.

    Recording presence only

    Damaged or obsolete goods are counted as if they were sound.

    Note condition and location on the same sheet as the quantity.

    Treating the custodian’s count as independent

    The people answerable for the stock are checking themselves.

    Have someone independent count or test-count.

    Netting locations together

    Surpluses in one place hide shortages in another.

    Report each location separately, by quantity and value.

    Closing sheets before recounts

    Differences are accepted that a second count would have cleared or confirmed.

    Recount every difference before the sheets are signed.

    Questions

    07 Physical verification FAQ

    How to do physical verification?

    Freeze the stock records at a cut-off date and take a copy. Count the items, giving most attention to high-value lines, and check both from the records to the goods and from the goods to the records. Note the condition and location of what you find, recount any differences, reconcile the count to the frozen records and report anything unresolved with its value.

    What is the physical verification process?

    It runs in three stages. Before the count, the records are frozen and the items to be checked are chosen. On the day, the goods are counted and inspected, with condition and location noted. Afterwards, differences are recounted, reconciled to the frozen records and reported by location and by value, so that nothing is netted away.

    CA Sundram Gupta

    Reviewed by CA Sundram Gupta · Chartered Accountant

    Patron Accounting LLP. Statements on CARO 2020 on this page signed off by CA Sundram Gupta: 23 October 2026

    Last reviewed: 23 October 2026 Applies to: businesses whose stock or assets are counted, and their auditors; the CARO 2020 points apply to companies covered by the Order

    Sources: Companies (Auditor’s Report) Order, 2020, clause 3(ii)(a) (MCA). General information, not professional advice; check the current position before acting.

    Need help with physical verification? See our stock audit service. A stock audit is built on physical verification.

    Talk to an expert

    Tell us what you need and the right person calls you back.

    🇮🇳 +91

      By sending this form you agree to our privacy policy.