Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    Stock audit glossary · Counting methods

    Cut-Off Procedure

    noun · also "cut-off testing"

    Definition

    A cut-off procedure fixes the exact moment that separates one period from the next and checks that every receipt and despatch of goods is recorded on the correct side of it. It matters at a stock count and at a year end, because goods that moved before the cut-off but were recorded after it, or the other way round, are counted twice or missed altogether.

    • Reviewed by CA Sundram Gupta · Chartered Accountant
    • Last reviewed 23 October 2026
    • 7 min read

    See related terms

    At a glance

    Fixes
    One moment in time A date, and a time on a site that never stops
    Checks
    Documents either side Receipt notes, delivery challans, invoices
    Catches
    Counted twice or missed Goods and records out of step
    Watch points
    Receiving and despatch bays Where waiting loads sit
    Rule
    The day the goods moved Not the date printed on the paperwork

    Meaning

    01 What a cut-off procedure is

    A period ends at a fixed moment, but goods keep moving. A load leaves on the last afternoon and is invoiced the following week; a delivery arrives at night and is booked the next morning. Each of these opens a gap between what is physically on site and what the records say, and a count taken in that gap is only right if every movement is placed on the correct side of the line.

    The errors that follow are real amounts, not rounding. Goods sent out before the period end but still shown in stock are counted as held and recorded as sold. Goods received but not booked are on the floor with no purchase or supplier balance to match. Because these errors sit in a few days of documents, the check concentrates on those days: the receipt notes, delivery challans and invoices either side of the date, read one by one.

    At the count

    02 What a cut-off procedure means on count day

    Six points that settle which side of the line each movement falls on.

    Before counting starts

    • Record the last numbers. The last goods receipt note, delivery challan and invoice issued, with a photo of each register page.
    • Settle waiting loads in writing. Agree with the site which side of the cut-off any load in the yard or bay falls on.
    • Stop movement, or log it. Where the site cannot stop, every vehicle in and out is logged with its documents.

    Around the count

    • Check the bays first. Goods waiting to be received or despatched are the ones most often counted twice or missed.
    • Read the documents either side. Each one is matched to the day the goods actually moved.
    • Adjust before reporting. Anything on the wrong side is corrected before the stock position is given to anyone.
    The last document numbers are the evidence. They fix where the cut-off fell, so every later document can be placed on one side of it.

    In practice

    03 How a cut-off is corrected

    CountExtraMissedActual
    Input Cause Sample (INR)
    Stock counted The count sheets as totalled 2,40,00,000
    Counted but not yet received A load still in the yard, counted by mistake 8,40,000
    Owned but not counted Goods invoiced but still on site, and goods received but not booked 14,80,000
    Stock at the cut-off The figure that is reported 2,46,40,000

    2,40,00,000 − 8,40,000 + 14,80,000 = 2,46,40,000. Sample figures for illustration only; the worked example below shows the documents behind them.

    Five steps, in order

    1. Fix the cut-off date

      And a time as well, if the site works round the clock.

    2. Record the last documents issued

      The last goods receipt note, delivery challan and invoice before the cut-off.

    3. Stop or log movement during the count

      So nothing moves unrecorded while the stock is being counted.

    4. Check each document either side

      For the days just before and just after, against the day the goods actually moved.

    5. Put each movement in the right period

      And correct anything on the wrong side before the stock position is reported.

    Worked example

    04 Four documents around a year end

    One year end, four documents, three on the wrong side.

    A chemicals unit closing its year on 31 March checks four documents dated around that day
    Document Treatment What actually happened
    GRN 4417 · dated 31 March Take out Load still in the yard, counted by mistake (8,40,000)
    Invoice 2290 · dated 31 March Add back Goods left on 1 April, so still stock at the year end (11,20,000)
    GRN 4419 · dated 1 April Add Goods arrived on 31 March and were not counted (3,60,000)
    Invoice 2288 · dated 30 March As recorded Goods left on 30 March, as the paperwork says

    Three timing errors and no missing goods

    The first three lines are timing errors, not losses. The stock exists; the date attached to it is wrong. The last line is the check case, where the paperwork and the movement agree.

    Fixing the cut-off means matching each movement to the day it physically happened. A difference left on the wrong side of the line would show up as a shortage in one period and a surplus in the next.

    Watch out

    05 Common mistakes with cut-off

    Most cut-off errors come from goods and paperwork moving at different times.

    Moving goods during the count unlogged

    The count and the records describe different moments.

    Stop movement, or log every vehicle with its documents.

    Recording a sale while goods are on the floor

    The same goods are counted as stock and booked as sold.

    Record the sale on the day the goods leave.

    Unbooked loads in the yard

    Goods sit on site with no purchase to match.

    Agree each waiting load’s side of the cut-off in writing.

    Cut-off documents filed out of order

    The last number before the cut-off cannot be found.

    File the boundary days in number order and keep them together.

    Head office date instead of the site date

    Movements are placed by when they were entered, not when they happened.

    Use the date the goods moved at the site.

    A date with no time on a 24-hour site

    Loads on the last night fall on either side.

    Fix the cut-off time as well as the date.

    Questions

    06 Cut-off procedure FAQ

    What does "cut off" mean in auditing?

    In auditing, cut off is the boundary between two periods and the check that each transaction sits on the right side of it. For stock it means the goods counted, the goods received and the goods sent out all agree to the same moment, so that nothing is counted in one period and recorded in another.

    What does "cut off" mean in accounting?

    In accounting, cut off means recording each transaction in the period in which it actually happened. A sale belongs to the period in which the goods were sent, and a purchase to the period in which they were received, whatever the date on the paperwork.

    What is cutoff testing in an audit?

    Cutoff testing is the auditor’s check that transactions near the period end were recorded in the right period. The auditor takes the receipt notes, delivery challans and invoices from the days just before and after the period end and matches each one to the date the goods actually moved.

    CA Sundram Gupta

    Reviewed by CA Sundram Gupta · Chartered Accountant

    Patron Accounting LLP. This page makes no regulatory statement.

    Last reviewed: 23 October 2026 Applies to: any business running a stock count or closing a period, and the auditors attending it

    Sources: general stock-count and audit practice; no statutory statement is made on this page. General information, not professional advice.

    Need help with a cut-off procedure? See our stock audit service. A stock audit records the last documents and checks the days either side.

    Talk to an expert

    Tell us what you need and the right person calls you back.

    🇮🇳 +91

      By sending this form you agree to our privacy policy.