Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    Stock audit glossary · Quick commerce and distribution

    Order Fill Rate

    noun · also called fill rate or order completeness

    Definition

    Order fill rate is the share of customer orders supplied in full from stock, with no line short, substituted or left waiting. It measures availability, not correctness: an order that arrives complete but with a wrong item still counts as filled, which is why it is read alongside pick accuracy. When it falls while the system shows plenty of stock, the stock record itself is often wrong.

    • Reviewed by CA Sundram Gupta · Chartered Accountant
    • Last reviewed 23 October 2026
    • 7 min read

    See related terms

    At a glance

    Formula
    Orders filled in full ÷ orders received Times 100 for a percentage
    Also measured by
    Lines, units or value Each gives a different figure
    Substitutions
    Do not count as filled The customer did not get what was ordered
    Measured against
    The order as first placed Not as later amended
    Warning sign
    Falling while system stock looks healthy Often phantom stock

    Meaning

    01 What an order fill rate is

    Availability and correctness fail for different reasons, and fill rate exists to isolate the first. An order picked perfectly but missing one line lowers the fill rate and leaves pick accuracy untouched; an order complete in quantity but carrying a wrong item does the opposite. A business that tracks only one of the two will keep fixing the wrong part of its operation.

    The measure also depends on the stock record being right. A line the system shows as available but which is not on the shelf produces a failed pick and a fill-rate miss, and the cause is record accuracy, not buying. A line on the shelf but recorded at the wrong location is just as unavailable in practice. So a fill rate reported with no recent count behind it describes the system rather than the shelf, and a fall in it is often the first sign of phantom stock.

    Where it is used

    02 Where order fill rate is measured, and what it signals

    Who watches it, and what a drop tells them.

    Who measures it

    • Suppliers to organised retail. Buyers rate them on it, and repeated shortfalls cost listings.
    • Pharmaceutical distributors. A missing line often cannot be substituted.
    • Quick-commerce and dark stores. Orders are small and many, so every missing line shows.

    What a fall can mean

    • The record is wrong. System stock that is not on the shelf; an accuracy problem.
    • The buying is wrong. A line correctly shown at zero; a replenishment problem.
    • The measure is wrong. Substitutions or amended orders counted as filled.
    Same number, three different fixes. The first is fixed in the warehouse, the second in buying and the third in reporting, so a fill-rate miss is traced before anyone acts on it.

    In practice

    03 How order fill rate is calculated

    Orders in fullOrders receivedOrder fill rate
    Input Where it comes from Sample
    Orders received The orders as first placed in the month 10,000
    Orders supplied in full Every line complete, no substitution 8,640
    Order fill rate In full ÷ received 86.4%

    8,640 ÷ 10,000 × 100 = 86.4%. Sample figures for illustration only.

    From order to cause

    1. Capture the order as placed

      Before any amendment; measuring against a revised order hides the failures.

    2. Mark every line

      Complete, short, substituted or unavailable.

    3. Count only full orders as filled

      Substitutions are excluded, because the customer did not get what was ordered.

    4. Trace each miss to a cause

      Shown as available but absent is a record problem; shown as zero is a buying problem.

    5. Report it with pick accuracy

      Availability and correctness fail independently, so one without the other misleads.

    Worked example

    04 One month, four fill rates

    Sample figures.

    A distributor's month measured four ways
    Measured by Calculation Fill rate
    Orders complete 8,640 of 10,000 86.4%
    Lines supplied in full 43,900 of 46,000 95.4%
    Units supplied 1,84,000 of 1,90,000 96.8%
    Value supplied (INR) 4,62,00,000 of 4,80,00,000 96.3%

    All four are correct, ten points apart

    Order fill is the harshest, because one missing line fails the whole order, and it is the one the customer experiences. Unit fill is the kindest and the one most often quoted inside the business. A distributor reporting 96.8% while its customers experience 86.4% has a reporting problem before it has a supply problem.

    Which basis applies should be written into the supply agreement, because the gap between them widens as orders carry more lines.

    Watch out

    05 Common mistakes with order fill rate

    Most of these point the fix at the wrong part of the operation.

    Blaming buying for every miss

    Many misses are lines the system wrongly shows in stock.

    Split misses into record and replenishment causes.

    Counting substitutions as filled

    The figure flatters the service the customer received.

    Exclude substituted lines.

    Measuring against amended orders

    The shortfalls are edited out before they are counted.

    Measure against the order as first placed.

    Tracking it without pick accuracy

    Nobody can tell a stock problem from a picking one.

    Report the two side by side.

    No recent count behind it

    The rate describes the database, not the aisle.

    Read it against the latest count results.

    One target for every category

    Steady lines hide the ones customers could not get.

    Set and read targets by category.

    Question

    06 Order fill rate FAQ

    How do you calculate order fill rate?

    Divide the number of orders supplied in full from stock by the number of orders received in the same period, and multiply by 100. For example, 8,640 complete orders out of 10,000 gives 86.4%. Count an order as filled only if every line was supplied in the quantity ordered, without substitution, and measure against the order as it was first placed.

    What is an order fill rate?

    It is the percentage of customer orders that a business supplies complete from the stock it holds. It shows how often a customer gets everything they ordered first time, and a sudden fall is often an early sign that stock records and shelves no longer agree.

    What is a good fill rate?

    There is no single good figure. The right target depends on the product, the number of lines in a typical order and what the customer has been promised, and it is often written into the supply agreement. Two things matter more than the number: the basis it is measured on (orders, lines, units or value) and whether a recent count stands behind the stock data it relies on.

    What is OTIF vs fill rate?

    OTIF means on time in full: an order counts only if it is complete and arrives by the agreed date. Fill rate looks at completeness alone. An order delivered complete but two days late passes fill rate and fails OTIF, so OTIF is always the same or lower than the order fill rate for the same orders.

    CA Sundram Gupta

    Reviewed by CA Sundram Gupta · Chartered Accountant

    Patron Accounting LLP. This page makes no regulatory statement.

    Last reviewed: 23 October 2026 Applies to: distributors, quick-commerce operators and suppliers measured on order completeness

    Sources: general stock-counting and trade practice; no statutory statement is made on this page. General information, not professional advice.

    Need help with order fill rate? See our dark store stock audit service. A dark store stock audit tests whether the stock record behind the fill rate is right.

    Talk to an expert

    Tell us what you need and the right person calls you back.

    🇮🇳 +91

      By sending this form you agree to our privacy policy.