Adjusting the balance to zero
The symptom goes; the cause stays.
Stock audit glossary · Records and evidence
noun · also "minus stock"
Negative stock is a system balance of less than zero for an item or location. It cannot exist physically, so it always points to a recording error: goods issued before their receipt was booked, stock used against the wrong item code, or a transfer recorded at one end only. The missing entry exists somewhere and has to be found, not adjusted away.
Meaning
A shelf cannot hold less than nothing, so when a system shows a minus balance there is no doubt the record is wrong. That makes negative stock a useful warning: the more often it appears at a site, the more of that site's stock differences are recording problems rather than real losses. The usual causes are an issue posted before the matching receipt is entered, receipts booked late, a transfer recorded at one end only, and stock used against the wrong item code or location.
The tempting fix is to adjust the balance to zero. That hides the symptom and leaves the cause in place, so the same problem comes back and the adjustments pile up as unexplained write-offs. Reading the entries for the item in time order shows which one came late or went to the wrong code, and fixing that step in the process is what stops it recurring.
At the count
Every negative balance is a known error before anyone counts.
In practice
But the receipt is not yet entered in the system.
The issue is posted against a balance the system thinks is zero.
And stays there until the receipt is entered.
Which is why the problem is often seen and rarely investigated.
Read the entries in time order, find the late one, and change what caused it.
Worked example
Sample lines from one report.
| Item | System / physical | What happened |
|---|---|---|
| Resin grade B | −220 / 180 kg | Issue posted before the receipt note |
| Fastener M8 | −1,450 / 0 nos | Use booked against the wrong item code |
| Pigment blue | −35 / 35 kg | Return to store never posted |
Each is a recording problem. The resin line will correct itself once the receipt is posted. The fastener line will not: the wrong code carries usage that belongs to another item, and that other item is overstated by the same quantity.
Clearing negative balances before the count matters, because otherwise the system nets them against real surpluses and the difference report looks cleaner than it is.
Watch out
Most of these hide the cause instead of fixing it.
The symptom goes; the cause stays.
The problem is in the records, not on the rack.
Recording errors look like losses.
Work stops instead of the cause being exposed.
A site-wide process fault looks like one-off noise.
The difference report understates the problem.
Question
It is when the stock records show fewer than zero of something, for example "minus 220 kg" of a resin. That cannot be true on a shelf, so it means an entry is missing or wrong, most often an issue recorded before the matching receipt. The figure is put right only when the missing entry is found and posted.
Patron Accounting LLP. This page makes no regulatory statement.
Sources: general stock-recording and audit practice; no statutory statement is made on this page. General information, not professional advice.
Need help with negative stock? See our stock audit service. A stock audit lists negative balances before the count.