Re-verification cycle
Weighbridges are re-verified by the Legal Metrology authority, ordinarily every 12 months, and after any repair or reinstallation.
Legal Metrology acts and rulesStock audit glossary · Records and evidence
noun · a check on a weighing instrument
Weighbridge verification is checking that the platform scale used to weigh vehicles and bulk loads gives accurate readings, by examining its legal metrology stamp and testing it with a known load. Where stock is measured by weight rather than counted, the scale is part of the evidence: if it has not been verified, every quantity taken from it is unsupported.
Meaning
In trades where goods arrive and leave by the lorry load, nobody counts anything. Fertiliser, grain, coal and scrap are handled in bulk, and every quantity in the records started as a number on a platform scale. Whatever error that scale carries is built into the whole stock history, which is a very different exposure from a miscount on one line.
Two checks deal with it. The statutory one is the stamp, showing that the legal metrology authority found the scale accurate on a stated date; an out-of-date stamp puts every later figure in doubt. The practical one is a test weighing during the count, with a known load or a second scale, because a scale can drift the day after it was stamped and nothing in the statutory cycle would show it. Tare weights are examined alongside, since a tare taken from a table rather than measured puts the same error into every load.
Framework
The rules come from the Legal Metrology Act, 2009 and the Legal Metrology (General) Rules, 2011. A weighbridge used in trade is verified and stamped by the legal metrology authority, not by the business using it or a private calibrator, and re-verified on a fixed cycle. Enforcement sits with each state’s legal metrology department.
Weighbridges are re-verified by the Legal Metrology authority, ordinarily every 12 months, and after any repair or reinstallation.
Legal Metrology acts and rulesReadings from a scale whose stamp has lapsed are open to challenge. Using such a scale in a transaction is an offence under section 33 of the Legal Metrology Act, 2009, with a fine of ₹2,000 to ₹10,000 for a first offence. The readings are not void, but they are weak evidence of quantity and should be backed by a re-weighment on a verified scale or other corroboration.
A private calibration certificate is useful evidence of accuracy, but it is not the statutory stamp and does not replace it.
In the file
The slip shows what the scale said; the evidence shows it was right.
In practice
Confirm an authority found the scale accurate and the certification has not expired.
A question about last quarter’s tonnage is answered by last quarter’s certificate.
Or take the same vehicle across twice, to find drift the cycle cannot.
Measured each time or assumed from a table, and consistent for the same vehicle.
A scale out of tolerance was wrong for every load since it was last proved.
Worked example
Sample figures.
| Check | Result | Bearing on the stock |
|---|---|---|
| Stamp validity | Expired 4 months ago | Readings open to challenge |
| Test with a 10 tonne known load | 10.31 tonnes | Over-reads by about 3.1% |
| Coal stock by survey | 4,180 tonnes | Measured independently |
| Same stock by bridge readings | 4,310 tonnes | Overstated by 130 tonnes |
| Value of the gap | 11,05,000 | Stock that was never there |
The lapsed stamp does not mean the bridge is broken; it means its readings can be challenged, whatever they show. The test with a known load is what shows this bridge also over-reads, by about 3.1%.
Applied across the stock, that is 130 tonnes and 11,05,000 of value that was never there. Re-stamping fixes the legal position; only recalibration fixes the figures, and stock received while the stamp was lapsed stays in question.
Watch out
Where the instrument is the record, its condition is not a detail.
Every figure since is open to challenge.
Every load is out by the same amount, and averaging will not fix it.
A scale can drift the day after it is stamped.
Wet and dry lots are compared as if they were the same.
It stops being a measurement and becomes a choice.
Earlier loads on the same scale stay wrong.
Question
Start with the legal metrology stamp and its date; weighbridges are re-verified ordinarily every 12 months and after any repair. Then put a known load across the platform, such as certified test weights or a vehicle weighed on a verified scale, and compare the reading. Check that tare weights are measured, not taken from a table.
Patron Accounting LLP. The statement on legal metrology on this page signed off by CA Sundram Gupta: 23 October 2026
Sources: Legal Metrology Act, 2009 and Legal Metrology (General) Rules, 2011 (Department of Consumer Affairs, Legal Metrology). General information, not professional advice; check the current position before acting.
Need help with weighbridge verification? See our stock audit service. A stock audit tests the scale before relying on its readings.