Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    Stock audit glossary · Pharmaceuticals

    Retest Date

    noun · also written re-test date

    Definition

    A retest date is the date by which a material must be tested again to confirm it still meets its specification. It is not an expiry date: material that passes the retest can still be used, usually with a new retest date set. Retest dates are given to materials that change slowly and whose condition can be checked by testing, such as stable active ingredients.

    • Reviewed by CA Sundram Gupta · Chartered Accountant
    • Last reviewed 23 October 2026
    • 7 min read

    See related terms

    At a glance

    Marks
    When to test again Not when to discard
    Given to
    Stable ingredients and raw materials Whose condition can be tested
    Once the date passes
    Not usable until retested Neither issued nor written off
    If the test passes
    Released again Usually with a new date
    Differs from
    An expiry date Which ends usable life

    Meaning

    01 What a retest date is

    Some materials do not stop being usable on a fixed day. They change slowly, and whether they still meet specification can be found out by testing. For these, the date on the label marks the next test, not the end of the material’s life.

    That changes how a lapsed lot is treated at a count. Expired material is finished, however it looks. A lot past its retest date is not lost; it simply cannot be issued until it has been tested. It belongs in a blocked status, not in a write-off and not in freely available stock, and showing it as available overstates what production can draw on.

    Framework

    02 Retest dates under Indian rules

    In India the retest date comes from good manufacturing practice under Schedule M to the Drugs and Cosmetics Rules, 1945. Good manufacturing practice allows a retest date for stable active ingredients and raw materials; the material is retested then and used only if it still meets specification. Schedule M also requires quarantined, rejected and returned material to be kept physically apart and clearly labelled, which is where a lapsed lot waits for its test.

    Verified

    Retest date allowed

    For stable active ingredients and raw materials, retested at the date and used only if still within specification.

    Acts and rules on CDSCO
    Verified

    Blocked material kept apart

    Quarantined, rejected and returned material physically segregated and clearly labelled.

    CDSCO
    Verified

    Revised Schedule M

    Revised by G.S.R. 922(E) of 28 December 2023 and now fully in force.

    CDSCO

    Where it is used

    03 Where retest dates are used, and where they are not

    It applies only where condition can be tested.

    Where retest dates are used

    • Pharmaceutical manufacturing. Active ingredients and stable raw materials can carry a retest date instead of an expiry date.
    • Specialty and fine chemicals. Supplied against a specification that can be checked again by testing.
    • Laboratory reagents and reference standards. Checking them again at intervals is routine.

    Where they are not

    • Engineering and general stores. Materials either work or do not; there is nothing to retest.
    • Perishable goods. Food and similar goods carry a use-by or expiry date instead.
    • Retail stock. Goods are sold, not tested, so shelf life is printed as a fixed date.
    The test is what makes the date movable. Where a material’s condition cannot be measured, a fixed expiry is the only safe date.

    In practice

    04 How a retest date works in practice

    Retest dateCount dateDays left
    Input Where it comes from Sample
    Retest date on the batch The certificate of analysis and the interval set from stability data 15 Dec
    Count date The reporting date of the count 30 Sep
    Days left Above zero: available. Zero or below: blocked until tested 76

    From 30 September to 15 December is 76 days, so the lot counts as available; a negative result would move it to blocked stock. Sample dates for illustration only.

    From receipt to retest

    1. Record the date against the batch

      The material arrives with a certificate of analysis; its retest date is entered with an alert set ahead of it.

    2. Sample before the date

      As the date nears, a sample is tested against the original specification.

    3. Release or block

      A pass returns the lot to use, usually with a new retest date; a fail blocks it pending a disposal decision.

    4. Treat a lapsed lot as unavailable

      If the date passes without a test, the lot is neither issued nor written off until it is tested.

    5. Count with the date

      At a count, each lot’s retest date and test status are recorded next to the quantity.

    Worked example

    05 Three lots at one reporting date

    Sample batches.

    A formulation plant checks three lots at a 30 September reporting date
    Material and date Status at 30 September Treatment
    API batch 2201, retest 15 September Date passed, not tested Blocked, not written off
    API batch 2209, retest 2 December Within the period Available
    Excipient batch 4417, expiry 20 January Within the period Available

    A lapsed retest is a status, not a loss

    Batch 2201, carried at 34,00,000 rupees, has passed its retest date. It is not condemned: if it passes the test it can be released with a new date. Until then its value sits in blocked stock, not in a write-off.

    Nor can it stay in available stock, which is where a system that tracks only expiry dates will leave it. The excipient carries an expiry date instead, so its row follows a different rule.

    Watch out

    06 Common mistakes with retest dates

    Both throwing it away and using it untested are errors.

    Discarding a lot at its retest date

    Usable material is thrown away untested.

    Test it; discard only on a failed result.

    Issuing a lapsed lot untested

    Unchecked input goes into production.

    Block the lot the day its date passes.

    Showing it as unrestricted

    Available stock is overstated while a test is pending.

    Hold lapsed lots in a blocked status.

    Using another lot’s result

    One batch’s test is used to extend a different batch.

    Retest each lot on its own sample.

    No alert before the date

    The date passes unnoticed until the count.

    Set an alert well ahead of each date.

    One interval for every material

    Intervals differ by material and by how it was stored.

    Set each interval from its stability data.

    Question

    07 Retest date FAQ

    Is retest date the same as expiration date?

    No. An expiration date marks the end of a material’s usable life, and expired material is not used. A retest date marks when the material must be tested again: good manufacturing practice allows a retest date for stable active ingredients and raw materials, and the material is used only if it still meets specification.

    CA Sundram Gupta

    Reviewed by CA Sundram Gupta · Chartered Accountant

    Patron Accounting LLP. Statements on Schedule M and good manufacturing practice on this page signed off by CA Sundram Gupta: 23 October 2026

    Last reviewed: 23 October 2026 Applies to: pharmaceutical and chemical manufacturers and distributors holding materials with retest dates; the Schedule M points apply to manufacturers in India

    Sources: Drugs and Cosmetics Act, 1940 and Rules, 1945, Schedule M as revised by G.S.R. 922(E) of 28 December 2023 (CDSCO). General information, not professional advice; check the current position for your site before acting.

    Need help with retest dates? See our stock audit for pharmaceutical manufacturing service. A pharmaceutical stock audit records each lot’s retest date and test status with its quantity.

    Talk to an expert

    Tell us what you need and the right person calls you back.

    🇮🇳 +91

      By sending this form you agree to our privacy policy.