Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    Stock audit glossary · Stock rotation

    FEFO (First Expired, First Out)

    noun · short for "first expired, first out"

    Definition

    FEFO is a rule for issuing stock under which the batch with the earliest expiry date goes out first, whenever it was received. It differs from first in, first out (FIFO), which issues by date of receipt; the two give different answers whenever a later delivery has a shorter remaining shelf life. FEFO suits any goods that expire, because the order in which goods arrive does not predict the order in which they expire.

    • Reviewed by CA Sundram Gupta · Chartered Accountant
    • Last reviewed 23 October 2026
    • 7 min read

    See related terms

    At a glance

    Issues
    Earliest expiry first Whatever the receipt date
    Differs from FIFO
    When shelf lives differ A later batch can expire sooner
    Needs
    Expiry held per batch Captured at receipt, shown at the rack
    Used for
    Medicines, food, farm inputs Anything with a dated life
    Tested by
    Issues against expiry order Not by the written policy

    Meaning

    01 What FEFO is

    Issuing by date of receipt is the obvious rule, and it fails wherever goods expire. The order in which deliveries arrive says nothing about the order in which they become unusable: a consignment received this week can have less life left than one received two months ago, depending on when each was made and how long it sat in the supply chain.

    Issuing by expiry closes that gap. To work, the expiry date has to be captured at receipt and held against each batch at its storage position, because a rule nobody can follow at the shelf is a policy, not a control. Where the system holds only receipt dates, the picker cannot comply, and the first sign of failure is usually expired goods found behind newer stock at a count.

    Where it is used

    02 Which sectors use FEFO and why

    Wherever goods carry a dated life.

    Where FEFO is the rule

    • Medicines. In manufacture and distribution, where issuing out of date order costs more than a write-off. Schedule M to the Drugs Rules, 1945 requires stock rotation on a 'first in/first expiry, first out' basis, and CDSCO's draft distribution guidance asks for products due to expire first to be distributed first.
    • Food and groceries. Above all chilled and fresh lines, where the usable window is days.
    • Farm inputs and chemicals. Crop protection products, treated seed, cosmetics, adhesives: anything that degrades on a schedule.

    Where receipt order is enough

    • Engineering components. Parts that do not expire.
    • Metals and most durable goods. Nothing about them changes with age on the rack.
    • Any stock without a dated life. FIFO gives a sensible order and is simpler to run.
    The test is whether the goods expire. Where batches arrive in the order they were made and carry the same shelf life, FEFO and FIFO give the same order.

    In practice

    03 How FEFO works and how it is tested

    In orderTestedFollowed
    Input How it is found Sample
    Issues tested A sample of recent issues of dated stock 60
    From the earliest-dated batch Batch issued against the batches on hand that day 51
    Out of order A later-dated batch went first 9
    Issues that followed FEFO Reported with the reasons for the nine 85%

    51 ÷ 60 = 85% of the sampled issues followed expiry order. Sample figures for illustration only.

    Five steps, in order

    1. Capture expiry at receipt

      Read from the carton, not assumed from the delivery date, and held against the batch.

    2. Record batch and date at the location

      So the information is where the picker stands, not only in a central system.

    3. Allocate the nearest-dated batch

      Among those available, whenever any of them arrived.

    4. Put away nearest-dated stock in front

      A rule the picker has to fight will be broken under pressure.

    5. Apply it to reserve and bulk stock too

      Older stock drifts to the back as fresher pallets arrive in front of it.

    Worked example

    04 Three batches, two picking orders

    Same product, same warehouse, different expiry dates.

    A distributor holds three batches of the same product with different shelf lives
    Batch (made on) Expires Picked: FIFO / FEFO
    A-114 (12 Jan), 400 units 11 Jan next year First / second
    A-118 (20 Jan), 350 units 19 July Second / first
    A-121 (2 Feb), 500 units 1 August Third / third

    FIFO would leave 350 units to expire

    Batch A-118 was made after A-114 but expires six months sooner, because it carries a shorter approved shelf life. Under first in, first out the older batch goes first and A-118 waits until it is close to expiry, when 350 units are written off. Under FEFO the picking order follows the expiry date and nothing is lost.

    A warehouse system set up for FIFO will follow it faithfully and still produce expiry write-offs nobody can explain. That is why the test is made on the issues, not on the configuration.

    Watch out

    05 Common mistakes with FEFO

    The rule is easy to adopt and often impossible to run.

    A policy the system cannot run

    Only receipt dates are held, so the picker cannot comply.

    Capture expiry for every batch at receipt.

    Expiry held centrally, not at the rack

    Nobody standing at the shelf can see it.

    Show batch and date at each storage position.

    Assuming later deliveries last longer

    The very assumption the rule exists to replace.

    Read the date on every batch.

    Pick face only

    The oldest stock gathers in bulk locations behind newer pallets.

    Apply the rule to reserve and bulk stock.

    Replenishment ignores the rule

    The discipline lasts only as far as the pick face.

    Replenish the pick face by expiry too.

    Finding out at the stocktake

    Months of expired stock turn up at once.

    Test issues against expiry order during the year.

    Questions

    06 FEFO FAQ

    What is FEFO vs FIFO?

    FIFO issues the stock received earliest; FEFO issues the stock that expires earliest. They match when batches arrive in the order they were made and carry the same shelf life. When a later delivery has a shorter life, FIFO leaves it on the shelf and FEFO sends it out first.

    Which is better, FIFO or Fefo?

    For goods that expire, FEFO, because it follows the date that actually matters. For goods with no expiry date, FIFO is enough and simpler to run. FEFO also needs the expiry date recorded for each batch at each location; without that, the rule cannot be followed at the shelf.

    What is FIFO, LIFO, and Fefo?

    They are three orders for issuing stock. FIFO (first in, first out) issues the earliest receipts first, LIFO (last in, first out) the latest receipts first, and FEFO (first expired, first out) the earliest expiry first. Only FEFO looks at expiry. How stock is costed in the accounts is a separate accounting choice.

    What is FEFO used for?

    FEFO is used to stop stock with a dated life from expiring on the shelf. Medicines, food, farm inputs, cosmetics and some chemicals are issued this way, so the nearest-dated batch goes out first and expiry write-offs are kept down.

    CA Sundram Gupta

    Reviewed by CA Sundram Gupta · Chartered Accountant

    Patron Accounting LLP. This page makes no regulatory statement.

    Last reviewed: 23 October 2026 Applies to: businesses holding stock with expiry dates, and the auditors who count it

    Sources: general stock-rotation and audit practice. The statement on rotation requirements for medicines is held until its official source is confirmed. General information, not professional advice.

    Need help with FEFO? See our stock audit service. A stock audit tests issues against expiry order.

    Talk to an expert

    Tell us what you need and the right person calls you back.

    🇮🇳 +91

      By sending this form you agree to our privacy policy.