This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- Saro Enterprises, a Tamil Nadu maker of plastic seedling trays, asked if they are nil-rated under GST.
- The Appellate Authority for Advance Ruling said no: the trays are not hand tools under heading 8201.
- The trays are classified as other plastic articles under CTH 39269099, at 9% CGST and 9% SGST.
- Agricultural use alone does not bring a plastic article within heading 8201.
- The earlier Tamil Nadu VAT exemption does not carry over to GST.
In short
This GST advance ruling from the Appellate Authority for Advance Ruling in Tamil Nadu asked a simple question: are plastic seedling trays used for paddy planting a farm tool that is exempt from GST? The company said yes, because the trays are agricultural implements. The tax authority said no, and taxed them as ordinary plastic goods.
What has changed
How it worked before
The position was unsettled. Under the old Tamil Nadu VAT law, the same trays had been treated as exempt agricultural implements in a 2014 advance ruling, and many sellers assumed that treatment would carry over. The company applied the same view to GST and claimed a nil rate.
What has changed
The Authority held that the trays are not classifiable under heading 8201, which covers hand tools used in agriculture. Chapter 82 covers only tools whose working part is made of base metal, and these trays are wholly plastic with no working edge. The residual words 'other tools of a kind used in agriculture' were read alongside specific tools that all have working edges, so the trays fall outside them. In practice, a plastic farm article without a metal working part should not be assumed nil-rated just because farmers use it. The Authority placed these trays under CTH 39269099, which carries 9% CGST and 9% SGST.
Who this affects
Makers and sellers of plastic farm articles such as nursery trays, pots, and similar items made wholly of plastic. Dealers who buy such goods for resale to farmers also have the same question about the rate they should charge.
An example
A firm in Coimbatore makes plastic nursery pots and seedling trays and sells them to farmers and small dealers. It asks whether its trays can be charged at nil under heading 8201, since farmers use them. This ruling suggests no, because a wholly plastic tray with no working edge does not fall under heading 8201 merely because it is used in farming. The firm would more likely be taxed under the general plastics entry at 18% combined rate.
What you should do
Check whether your product is made of plastic only, or has a working part of base metal, such as a blade, tine, or cutting edge. Do not treat a ruling as law for your business. This ruling binds only Saro Enterprises and its own tax officers, so other businesses should seek an advance ruling of their own or take advice on their product before applying a nil rate.
If you do nothing
If you charge nil rate on the assumption that this ruling covers you, a tax officer can check your invoices and demand the unpaid tax, along with interest. Penalties may also apply, and the amount grows with the length of the period and the volume of sales. Because the ruling binds only the company that asked, you cannot rely on it as your protection.
The terms explained
- advance ruling
- A written decision by a tax authority on how the law applies to a specific business's question, given before the business acts. It binds only the business that asked and its own tax office.
- heading 8201
- A classification entry in the Customs Tariff for hand tools used in agriculture, horticulture, or forestry. Goods under it can carry a nil GST rate in this case, but only if they qualify.
- HSN
- The Harmonised System of Nomenclature, an international product coding system. Indian tax authorities use its explanatory notes as a guide when deciding which code applies to a product.
- ejusdem generis
- A rule of interpretation under which general words at the end of a list are read as covering only things of the same kind as the specific items listed before them.
The ruling in detail
Appellate Authority for Advance Ruling
M/s. Saro Enterprises (Appellant; the Advance Ruling was sought by the same entity)
ORDER-in-Appeal No. AAAR/01/2019 (AR), dated 06.02.2019 (A.R. Appeal No. 1/2018/AAAR) · Tamil Nadu
Questions before the authority
- Whether the 'Agricultural seedling tray' made of plastic (polypropylene) manufactured by the Appellant falls under Chapter heading 8201 as a hand tool used in agriculture, and is therefore exempt from GST, or is classifiable elsewhere and taxable.
Facts
The Appellant manufactures plastic seedling trays from polypropylene by injection moulding, using virgin and scrap material, and sells them mainly to farmers and small dealers for paddy transplantation. The trays were exempt under the earlier TNVAT regime on a 2014 advance ruling that treated them as agricultural implements. After GST, the Appellant claimed they fall under heading 8201 and so attract nil rate, and the original Authority ruled otherwise.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of plastic agricultural seedling trays (Chapter 8201 claim) | Not under Chapter 8201. Classifiable under CTH **39269099**, taxed at **9% CGST and 9% SGST**. Rate and CTH are as quoted from the original ruling at para 2.0 of the order, which the Appellate Authority upheld. The rate entries cited are SI. No. 111 of Schedule III, Notification No. 01/2017-C.T.(Rate), and G.O.(Ms) No. 62 dated 29.06.2017 for SGST. |
The Appellate Authority dismissed the appeal and upheld the original ruling. The plastic agricultural seedling trays are not classifiable under heading 8201 and are classifiable under CTH 39269099 as other articles of plastics, at 9% CGST and 9% SGST. The Authority found no reason to interfere with the original Authority's ruling.
Reasoning
The Authority applied Section XV and Chapter 82 of the Customs Tariff, which covers only tools whose working part is of base metal, per Chapter Note 1 and the HSN General Explanatory Note. Because the tray is made wholly of plastic and has no working edge, it cannot fall under Chapter 82. For the residual phrase 'other tools of a kind used in agriculture' in heading 8201, the Authority applied ejusdem generis, reading it alongside specific items that all have working edges. It held that the tray's agricultural use alone does not bring it within 8201. The Authority also held that classification follows Explanatory Rule (iii) and (iv) to Notification No. 1/2017-Central Tax (Rate), and that the earlier TNVAT exemption does not govern GST classification.
Provisions relied on
- Section 97(1) and 97(2) of the CGST/TNGST Act 2017 (scope of advance ruling)
- Section 99, 100(1), 100(2), 101(1), 102, 103 and 104(1) of the CGST/TNGST Act 2017 (constitution, appeal, time-limit, binding effect, rectification, void ruling)
- Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017, explanations (iii) and (iv)
- Notification No. 01/2017-C.T.(Rate) dated 28.06.2017, Schedule III SI. No. 111 (as cited in the original ruling)
- Notification No. 2/2017-Central Tax, SI. No. 137 (cited by the Appellant)
- G.O.(Ms) No. 62 dated 29.06.2017 (Tamil Nadu SGST rate entry, as cited in the original ruling)
- First Schedule to the Customs Tariff Act 1975: Section XV, Section Note 3, Chapter 82 Chapter Note 1, heading 8201
- HSN Explanatory Notes to Chapter 82 (General) and to heading 3926
- L.M.L. Ltd v. Commissioner of Customs, 2010 (258) ELT 321 (SC) (HSN as a guide to interpretation)
- Principle of ejusdem generis
- TNVAT Act 2006, Fourth Schedule Part B, Entry I(ii), and ACAAR No. 112/2013-14 dated 23.10.2014 (prior exemption, considered but not followed)
For the practitioner
This order is useful for a practitioner facing a claim that a plastic agricultural article is an agricultural hand tool under 8201. It confirms that Chapter 82 covers only base-metal tools with a working part of base metal, and that agricultural use alone does not bring a plastic article into 8201. It does not decide the classification of agricultural implements made of base metal or with a metal working part. Under Section 103 the ruling binds only the Appellant and the jurisdictional officers, and a prior TNVAT exemption does not carry over to GST.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/2024-02/tn-aaar-01-2019.pdf
Legibility of the scan, as read: high.
Prepared 29-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
