Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    PVC Floor Mats Attract 18% GST Under Plastics Heading 3918

    Maharashtra AAAR ruled that 100% PVC carpet mats are plastic floor coverings taxed at 18% GST, not textile mats at 12%.

    Ruling
    ORDER NO. MAH/AAAR/SS-RJ/06/2018-19 dated 21.08.2018
    Dated
    Authority
    Appellate Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. Company asked if PVC mats fall under textiles or plastics
    2. AAAR confirmed PVC floor mats attract 18% GST under Heading 3918
    3. Mats made completely of plastic cannot be treated as textile products
    4. Lower 12% GST rate for textile floor coverings does not apply

    In short

    National Plastics India Limited asked tax authorities whether its PVC carpet mats should be taxed at 12% Goods and Services Tax (GST) as textile floor coverings or at 18% GST as plastic floor coverings. The company argued that its two-stage extrusion process creates a non-woven carpet structure, qualifying it for the lower textile tax rate.

    What has changed

    How it worked before

    Many manufacturers assumed that flexible, carpet-like PVC floor mats qualified as non-woven textile floor coverings under Chapter Heading 5705, paying 12% GST.

    What has changed

    The Appellate Authority for Advance Ruling (AAAR) upheld that mats made entirely of extruded PVC yarn and liquid PVC backing belong under Heading 3918 for plastic floor coverings. Because the exposed surface contains no actual textile fibers, the product cannot use textile classification rules. Manufacturers must charge 18% GST (9% CGST + 9% SGST) on these plastic floor mats.

    Who this affects

    Manufacturers, wholesalers, and importers who produce or sell 100% PVC carpet mats, plastic floor coverings, and synthetic door mats.

    An example

    Apex Matting produces synthetic door mats made entirely by extruding PVC resin into webbed strands bonded to a PVC backing. The business wants to know whether to issue invoices charging 12% GST or 18% GST. Under the principle in order MAH/AAAR/SS-RJ/06/2018-19, because the mat contains no natural or synthetic textile yarns, it counts as a plastic floor covering under Heading 3918 taxable at 18% GST. Apex should evaluate its product design with an advisor before setting its pricing.

    What you should do

    Check the exact raw material composition and manufacturing steps of your floor coverings. This advance ruling legally binds only National Plastics India Limited and its tax officer, but local tax inspectors may adopt this logic during audit assessments. Consult a tax professional before altering your billing tax rates.

    If you do nothing

    If you continue charging 12% GST on 100% plastic mats, tax officers during an audit may reclassify your goods under Heading 3918. You will be required to pay the 6% tax difference along with mandatory interest and penalties. Your corporate buyers may also face disputes when claiming input tax credit on those purchases.

    The terms explained

    Heading 3918
    A specific category in the GST tariff schedule for plastic floor coverings, wall coverings, and ceiling coverings.
    Heading 5705
    A category in the GST tariff list used for other textile floor coverings, including woven or tufted carpets.
    Advance Ruling
    An official written decision by tax authorities explaining how tax rules apply to a specific business's product or transaction.
    Input Tax Credit
    The tax a business pays on its shop purchases, which it subtracts from the GST collected on sales before paying the government.

    The ruling in detail

    Appellate Authority for Advance Ruling

    National Plastic Industries Limited

    ORDER NO. MAH/AAAR/SS-RJ/06/2018-19 dated 21.08.2018 · Maharashtra

    Questions before the authority

    • Correct classification and rate of GST applicable for PVC carpet mats / floor coverings manufactured by the appellant.

    Facts

    The appellant manufactures floor mats and coverings made of PVC, known as PVC Carpet Mats or floor coverings. The manufacturing process involves two stages: stage 1 extrudes PVC monofilament yarn to form a non-woven web/carpet pile, and stage 2 impregnates and laminates this web with a layer of liquid PVC which solidifies under heat to form a backing. The appellant contended that the product is a non-woven textile floor covering classifiable under Chapter Heading 5705 attracting 12% GST, whereas the AAR classified it under Heading 3918 attracting 18% GST.

    Ruling

    QuestionWhat the authority ruled
    Classification and GST rate for PVC floor mats / floor coveringsCTH 3918, 18% GST (9% CGST + 9% SGST)
    Restricted to the specific types and manufacturing process of PVC floor coverings/mats submitted by the appellant.

    The Appellate Authority for Advance Ruling upheld the AAR order, holding that the PVC floor mats are classifiable under **Customs Tariff Heading 3918** as floor coverings of plastics. The applicable rate of GST is **18%** (9% CGST + 9% SGST). The ruling is restricted to the specific types of PVC floor coverings/mats manufactured as per the process and sample submitted by the appellant.

    Reasoning

    The AAAR observed that the exposed surface of the mat is a web made from 100% PVC formed through extrusion and moulding, without any identifiable textile fibres, filaments, or yarns. Under **Note 1(h) to Section XI** of the Customs Tariff, non-wovens impregnated, coated, covered, or laminated with plastics are excluded from Section XI (textiles). Further, **Note 1 to Chapter 57** provides that Chapter 57 covers only those floor coverings where textile material serves as the exposed surface. Applying **Rule 1 of the General Rules for Interpretation**, the product specifically falls under Heading 3918 as floor coverings of plastics.

    Provisions relied on

    • Section 97 of CGST Act, 2017
    • Section 100 of CGST Act, 2017
    • Section 101 of CGST Act, 2017
    • Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017
    • Customs Tariff Act, 1975
    • Heading 3918
    • Heading 5705
    • Note 1 to Chapter 39
    • Note 1(h) to Section XI
    • Note 1 to Chapter 57
    • Rule 1 of General Rules for Interpretation

    For the practitioner

    This ruling establishes that floor mats manufactured entirely from extruded PVC and liquid PVC coating cannot be treated as textile floor coverings under Chapter 57. Tax practitioners should note that **Note 1(h) to Section XI** excludes plastic-impregnated or coated non-wovens from textile chapters, requiring 100% plastic floor coverings to be classified under **Heading 3918 at 18% GST**.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/2024-02/mah_aaar_06_2018-19_npil.pdf

    Legibility of the scan, as read: high.

    Prepared 23-10-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Appellate orders (AAAR)

    All Appellate orders (AAAR) →

    Does this 18% GST rate apply to all floor mats?

    No, it applies specifically to floor coverings made entirely of plastic like extruded PVC. Mats made from jute, coir, cotton, or fabric-backed textiles fall under separate tax headings with different rates.

    Is this ruling automatically binding on my business?

    No, an advance ruling binds only the business that filed the application and its assigned tax officers. However, tax departments across India use these decisions as persuasive guidance when evaluating similar products.

    What if my PVC mat includes a real fabric layer?

    If your floor mat contains actual textile fibers or a fabric base layer, the classification might change under GST tariff rules. You should review your technical product specifications with a qualified tax consultant.

    What should I do if a tax officer demands 18% GST on my mats?

    Show the officer your lab test reports and detailed manufacturing process. If your product differs from pure plastic extrusion or contains genuine textile content, you can defend your 12% rate or apply for your own advance ruling.