Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    GST on parts made with customer-owned tools: Karnataka appeal ruling

    The Karnataka appellate authority ruled that Nash Industries need not add the cost of customer-paid tools to the GST value of components.

    Ruling
    ORDER NO.KAR/AAAR/07/2018-19, DATE: 01/03/2019
    Dated
    Authority
    Appellate Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. Nash Industries makes sheet metal parts for Daimler India Commercial Vehicles using customer-paid tools.
    2. The lower authority said the tools' amortised cost must be added to GST value.
    3. The appellate authority reversed that, because the customer owned and paid for the tools.
    4. The ruling covers only the DICV contract; other contracts count only if their terms match.
    5. The Circular's rule still applies where the maker is contractually bound to supply tools.

    In short

    This Karnataka GST appeal asks whether a component maker must add the cost of customer-owned tools to the GST value of the parts it supplies. Nash Industries made sheet metal pressed components for industrial customers, including Daimler India Commercial Vehicles (DICV). It designed and made the tools, billed the customer, and was paid for them, but kept the tools to make the parts. The question was whether that tool cost forms part of the value on which GST is charged.

    What has changed

    How it worked before

    Businesses generally relied on CBIC Circular No. 47/21/2018-GST dated 08.06.2018. It says tools the customer owns and supplies free of cost are not added to value, but where the maker is contractually bound to provide the tools, their amortised cost is added. Where a contract did not make clear who had to supply the tools, the position was not settled. The lower authority had required the tool cost to be added in this case.

    What has changed

    The appellate authority set aside the lower ruling and held that the tool cost need not be added. It found that the DICV contract puts responsibility for tools on DICV, which takes title when it pays, so Nash had no duty to provide them. It also noted that the older Central Excise rule requiring amortisation has no GST equivalent. In practice, a maker whose contract places tool ownership and supply on the customer may leave out the tool cost, but the answer depends on the contract terms.

    Who this affects

    Component and parts makers who build goods using customer-owned moulds, dies or tools, where the customer pays for them and the maker keeps them for production. Auto-parts and industrial-component suppliers are the typical examples.

    An example

    A Pune maker of bracket components supplies a tractor company that pays for the press tools and owns them, with no clause requiring the maker to supply tools. The maker asks whether it can leave the tool cost out of the GST value. This ruling suggests it may, because the key facts match: customer ownership, customer payment, and no maker duty to supply. Whether it can rely on this depends on checking the actual contract, since the order turned on those clauses.

    What you should do

    Compare your own contracts with the DICV terms the order relied on: who owns the tools, who pays for them, who must supply them, and whether any tools are held as security. This ruling binds only Nash Industries and its own tax office. It is not automatically law for you, and the Circular's rule on contractual obligation still applies. Take professional advice before changing how you value supplies, and consider seeking an advance ruling on your own contract.

    If you do nothing

    If you assume this ruling covers you when it does not, a GST officer may treat the tool cost as part of the taxable value and demand the tax on the difference. Where your contract makes you responsible for supplying tools, the Circular's rule applies and the amortised cost must be added. Being wrong means paying the extra tax you under-declared, and you may face a dispute with your tax office.

    The terms explained

    advance ruling
    A written decision by a GST authority on a business's own question about how GST applies to its planned or current transaction. It binds only the business that asked and its own tax office.
    Appellate Authority for Advance Ruling
    The higher body that hears appeals against advance rulings given by the lower authority. Its decision here overturned the lower ruling.
    amortised cost
    The cost of an item, such as a tool, spread over the number of units it is used to make. It is the share of the tool cost attributed to each part produced.
    OEM
    Original equipment manufacturer, the company that builds the final product, such as a vehicle maker, which buys parts from suppliers like Nash.
    value of supply
    The amount on which GST is charged for a supply of goods or services. It is normally the price paid, plus certain other amounts the law specifically includes.

    The ruling in detail

    Appellate Authority for Advance Ruling

    M/s. Nash Industries (I) Pvt Ltd (appellant; the listing gives 'Nash Industries(I) Pvt Ltd')

    ORDER NO.KAR/AAAR/07/2018-19, DATE: 01/03/2019 · Karnataka

    Questions before the authority

    • Whether the amortized cost of the tools is to be added to arrive at the value of the goods supplied for the purpose of GST under Section 15 of the CGST Act read with Rule 27 of CGST Rules.

    Facts

    The appellant manufactures sheet metal pressed components for industrial customers, including Daimler India Commercial Vehicles Pvt Ltd (DICV). The tools needed to make these components were designed and manufactured by the appellant and billed to the customer, which paid for them, but the appellant retained them for manufacturing. The Advance Ruling Authority had held that the amortised cost of tools re-supplied free of cost must be added to the value of the components. The order records that the DICV contract provides that title to DICV-paid tools passes to DICV, while the appellant holds them only temporarily, and that some non-DICV tools are held by way of security.

    Ruling

    QuestionWhat the authority ruled
    Whether amortised cost of tools supplied free of cost by the customer must be added to the value of components supplied, under Section 15 CGST read with Rule 27 CGST RulesNo. The cost of tools supplied by the OEM customer free of cost is not required to be added to the value of components supplied by the appellant. The Advance Ruling was set aside.
    The order does not contain a separately labelled RULING section; this answer is taken from paragraphs 16 and 17. The conclusion is limited to contracts whose terms match the DICV contract examined.

    The Appellate Authority set aside the Advance Ruling and held that the cost of tools supplied by the OEM customer free of cost is **not required to be added** to the value of the components supplied by the appellant. The ruling is confined to the contract and purchase orders placed before it, and applies to other contracts of the appellant **only if their terms are the same** as the DICV contract.

    Reasoning

    The Authority examined whether the customer's payment was the sole consideration for the supply under Section 15 and whether any amount the supplier was liable to pay had been incurred by the recipient on its behalf under Section 15(2)(b). It relied on CBIC Circular No. 47/21/2018-GST dated 08.06.2018, which says free-of-cost moulds and dies owned by the OEM are not added to the value, but the amortised cost is added where the component manufacturer was contractually bound to provide the tools. Reading the DICV general terms (para 16.2) and the Daimler India Special Terms (paras 1.4, 2.1, 2.4 and 3), the Authority found no contractual obligation on the appellant to provide the tools, since DICV bore that responsibility and took title on payment. It also noted that the Central Excise Valuation Rules 2000 (Rule 6), which required amortisation, have no GST equivalent.

    Provisions relied on

    • Section 99 of the CGST Act and Section 99 of the KGST Act (constitution of the Appellate Authority)
    • Section 100 of the CGST Act and KGST Act (appeal)
    • Section 101 of the CGST Act and KGST Act (proceedings)
    • Section 98 of the CGST Act and KGST Act (advance ruling application)
    • Section 7(1) of the CGST Act (meaning of supply)
    • Section 9 of the CGST Act and Section 5 of the IGST Act (levy on supply)
    • Section 15 of the CGST Act (value of taxable supply)
    • Section 15(2)(b) of the CGST Act (amounts incurred by recipient on behalf of supplier)
    • Rule 27 of the CGST Rules
    • Rule 6 of the Central Excise Valuation Rules, 2000 (cited as the earlier regime)
    • CBIC Circular No. 47/21/2018-GST dated 08.06.2018
    • Daimler India Special Terms (DIST) paras 1.4, 2.1, 2.4 and 3, and General Terms para 16.2 (contract terms)

    For the practitioner

    A component maker supplying parts made with customer-owned tools can use this order to argue that the tool cost need not be added to the GST value where the customer owns the tools, pays for them, and the maker has no contractual duty to supply them. The order does not decide the point for other contracts, and it does not displace the Circular's rule that amortised cost is added where the component maker is obliged to provide the tools. Any reliance should first compare the actual contract terms with those in the DICV contract, which the order treats as decisive.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/2024-02/kar_aaar_07-2018-19-nash_ind.pdf

    Legibility of the scan, as read: medium.

    Prepared 30-10-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Appellate orders (AAAR)

    All Appellate orders (AAAR) →

    Does this mean I can leave out my tool costs too?

    Only if your contract matches the DICV contract on the points the order relied on. In that case DICV bore the responsibility for tools and took title when it paid. If you are obliged to supply tools, the Circular says their amortised cost must be added.

    Is this ruling binding on my state or other tax offices?

    No. The order applies only to Nash Industries and its own tax office, and to other contracts of Nash only if their terms are the same. Other tax offices are not bound by it and may take a different view.

    What if my tax officer disagrees with this reading?

    This order does not bind your tax officer in your case. You can explain the contract differences, and if the matter is unclear you can seek your own advance ruling. Get professional advice before taking a position in a dispute.

    What about tools held as security for other customers?

    The order records that some tools for non-DICV customers are held by way of security. The summary does not record a separate finding on them, so check those contracts separately before relying on this ruling.