This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- NMDC Limited asked for input tax credit on GST paid for building a private railway siding.
- The siding runs about 2 km, laid largely on land outside the factory.
- The authority held the siding is immovable property, so the works are blocked under section 17(5).
- Signalling and telecom work for the siding was also denied, as having no link to outward supply.
- The appeal was dismissed and the earlier advance ruling of 24 April 2019 was upheld.
In short
The question was whether NMDC Limited could claim GST input tax credit, the tax it paid on inputs and services, on contracts for building a private railway siding that links its new steel plant to the main rail line.
What has changed
How it worked before
The position was unsettled. Manufacturers building rail, track and signalling work for their plants had argued that such equipment is plant and machinery, and so eligible for credit, relying on a Supreme Court decision (Jayaswal Neco) that was decided under the earlier excise law.
What has changed
The authority decided that a siding with foundations and structures laid on land outside the factory is immovable property, so contracts for it are blocked under section 17(5)(c) and (d) of the CGST Act. It also held that the plant and machinery exception requires equipment used to make outward supply, which the siding lacks. In practice, credit on such works built outside a plant is likely to be denied. The order does not decide whether track or rail equipment inside the plant premises is plant and machinery.
Who this affects
Steel, cement and other manufacturers building a rail siding or spur to their plant, and contractors executing civil, track, signalling or electrical work for such sidings. Businesses building any other infrastructure on land outside their factory may also face the same question.
An example
A scrap recycler builds a 1.5 km siding from the main rail line to its factory gate on land it leases from the state. It asks whether it can claim credit on the contractor's civil foundations and signalling work. This ruling suggests no, because the siding is an immovable structure outside the factory and the signalling work has no link to outward supply. However, if the recycler asks about rail track inside its plant used to move molten metal, this ruling does not answer that question.
What you should do
This ruling binds only NMDC Limited and its own tax office. It is not automatically law for your business, and other tax offices are not bound by it. Before claiming credit on rail or siding work, check where the work is located, whether it is fixed to land, and whether the equipment is used to make your outward supply. Keep detailed records of each contract, and get professional advice on your specific facts. The order itself notes it may be challenged in a higher forum, so check its status before relying on it.
If you do nothing
If you claim credit on siding or similar works without checking, a tax officer may deny it in an audit or assessment, citing this order. You may then have to reverse the credit with interest and could face a penalty. Assuming the ruling covers your case, without checking your own facts, can turn a disputed claim into a demand.
The terms explained
- input tax credit
- The GST already paid on goods and services a business buys, which it can set off against the GST it must pay on its own sales. Some purchases are blocked from this set-off.
- works contract
- A contract where a contractor builds, repairs or constructs something for a client, often involving both labour and materials, such as building a structure on land.
- plant and machinery
- Machinery and equipment fixed to the ground and used directly to make goods or services the business sells. The GST law excludes some items, such as buildings and civil structures, from this definition.
- advance ruling
- A decision a tax authority gives in advance on how GST applies to a business's specific question. It binds only that business and its own tax office.
The ruling in detail
Appellate Authority for Advance Ruling
M/s NMDC Limited (appellant, shown in the order as M/s P.K. Mahapatra, Assistant General Manager (Finance), NMDC Limited, Dantewada (South Bastar), Chhattisgarh)
No. STC/AAAR/02/2019/77, Raipur, dated 03/09/2019 (the opening page of the proceedings bears No. STC/AAAR/02/2019/76; the listing reads CG/AAAR/02/2019-20) · Chandigarh
Questions before the authority
- Whether input tax credit can be availed for civil and railway allied works in connection with the laying of a private railway siding?
- Whether input tax credit can be availed on signaling and telecommunication system, mechanical and structural works in relation to the railway siding?
- Whether input tax credit can be availed on execution of P-Way, civil, overhead electrification, general electrical and signaling and telecommunication works for the proposed block station yard in relation to the private railway siding?
Facts
NMDC Limited is building a 3 MTPA greenfield integrated steel plant at Nagarnar, Chhattisgarh, and is laying a private railway siding about 2 km from the Kothavalsa-Kirandul line to move raw materials and dispatch finished products. The siding work is split into three packages (civil and railway allied works; S&T, mechanical and structural works for the siding and loco shed; and P-Way, civil, OHE, electrical and S&T works for a block station yard), executed by contractors engaged through IRCON. The appellant sought credit on the GST paid on these packages, and the appellate authority noted that most of the work lies outside the plant premises.
Ruling
| Question | What the authority ruled |
|---|---|
| Input tax credit on civil and railway allied works for laying the private railway siding (Package I) | **No. Credit not available. AAR order dated 24.04.2019 upheld.** The order gives one overall disposition for all three packages rather than separate answers to each question. Read as covering this item. |
| Input tax credit on signaling and telecommunication, mechanical and structural works for the railway siding (Package II) | **No. Credit not available. AAR order dated 24.04.2019 upheld.** Same overall disposition. The order treats the siding and allied signaling and telecom works as civil structures outside the factory with no nexus to outward supply. |
| Input tax credit on P-Way, civil, OHE, general electrical and S&T works for the block station yard (Package IV) | **No. Credit not available. AAR order dated 24.04.2019 upheld.** Same overall disposition. The order notes that the OHE and civil contracts were awarded to other contractors, which it treats as supporting its view of the works. |
The appellate authority dismissed the appeal and upheld the Advance Ruling Authority's order dated 24.04.2019, which denied input tax credit on the inward supplies for the siding. It held that the siding is an immovable civil structure with foundations, so the works are works contracts on immovable property that fall within the blocking clauses of section 17(5)(c) and (d). It also held that the siding and allied works have no nexus with outward supply, so they are not 'plant and machinery' under the explanation to section 17.
Reasoning
The authority held that the railway siding, with its foundations and structures laid on land outside the factory, is immovable property that will not be dismantled, so the works are works contracts for construction of immovable property under section 17(5)(c) and (d). It found that the 'plant and machinery' exception in the explanation to section 17 requires apparatus or machinery fixed to earth that is used for making outward supply, and that the siding and allied signaling and telecom works had no such nexus with outward supply. It distinguished the Supreme Court's Jayaswal Neco decision and the other cited cases as decided under Cenvat/Rule 57Q or on facts within the factory or involving telecom towers. It also relied on the Companies Act 2013 Schedule II to conclude that railway sidings are not classed as plant and machinery.
Provisions relied on
- Section 16(1) of the CGST Act, 2017 (entitlement to input tax credit)
- Section 17(5)(c) and (d) of the CGST Act, 2017 (blocked credits on works contracts and goods or services for construction of immovable property)
- Explanation to section 17 of the CGST Act, 2017 (definition of 'plant and machinery' and its exclusions)
- Section 2(119) of the CGST Act, 2017 (works contract)
- Section 2(83) of the CGST Act, 2017 (outward supply)
- Section 2(19) and 2(59) of the CGST Act, 2017 (capital goods and input)
- Section 100(1) and 101(1) of the CGST Act, 2017 and the corresponding Chhattisgarh GST Act provisions (appeal and ruling)
- Section 3(26) and 3(36) of the General Clauses Act, 1897 and section 3 of the Transfer of Property Act, 1882 (meaning of immovable property)
- CBIC Sectoral FAQ on railway sidings (mining sector)
- CBIC Circular No. 58/1/2002-CX dated 15.01.2002 (as cited in the AAR order)
- Schedule II of the Companies Act, 2013 (useful lives of assets)
- Supreme Court decisions in T.T.G. Industries (2004) and Duncans Industries (1999), relied on for immovability; Triveni Engineering (2000) and Jayaswal Neco (2015), addressed in the appellant's submissions
For the practitioner
This is a useful adverse ruling for a practitioner advising on credit for railway sidings or similar infrastructure laid outside a factory, because it treats such works as civil structures and denies credit under section 17(5). It does not decide whether track, signaling or rail infrastructure inside the plant premises, used for moving raw materials and molten metal, is plant and machinery, which the appellant argued at length and which the order does not resolve. Those arguments rely on Jayaswal Neco and similar cases, which remain open to be tested in a different factual setting, and the outcome may be challenged in a higher forum.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/2024-02/cg_aaar_02_2019-20_03.09.2019_nmdc.pdf
Legibility of the scan, as read: medium.
Prepared 07-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
