Tracking cheap interchangeable goods
It adds cost and answers no question anyone will ask.
Stock audit glossary · Tracking and traceability
noun · also “serial tracking” or serialised stock control
Serial number tracking records each unit by its own unique number, instead of treating units of the same item as one interchangeable quantity. Any single unit can then be traced from receipt, through its location, to dispatch. It is used where units are valuable one by one, carry their own warranty, or may need to be recalled.
Meaning
Most stock is handled as quantities: one bag of cement is as good as another. Some goods are not interchangeable, because a single unit is valuable, carries its own warranty, or may be recalled. For these the record must follow each unit, not just the count, so it can answer what a quantity record cannot: which unit went to which customer, when its warranty started, and where a faulty batch ended up.
It also changes what a count produces. Each unit found is matched to its record, giving three groups instead of one difference: units found and recorded, units recorded but not found, and units found with no record at all. The third group is the one a quantity count can never show, and it is where substitutions and unrecorded warranty replacements come to light.
Where it is used
Wherever a single unit can be asked about later.
In practice
Scan the manufacturer’s serial number as the unit comes in; never type it.
The stock record keeps a list of serial numbers for each item.
Transfer, allocation to an order, dispatch and return, each against the unit.
So a warranty can be dated, a claim checked and a recall limited to the affected units.
Units found against units recorded, giving matched, missing and unrecorded.
Worked example
Sample figures.
| Group | Units | What it usually means |
|---|---|---|
| Quantity on the floor against the system | 412 / 412 | Agrees: the count would pass |
| Serial numbers matched | 396 | Unit and record agree |
| In the system, not on the floor | 16 | Sold, moved or lost without a scan |
| On the floor, not in the system | 16 | Swapped, replaced or received unrecorded |
Sixteen units the system holds are somewhere else, and sixteen units on the floor are not in the record. Counted by number alone, the two gaps cancel and the stock looks right.
For serialised goods, warranty, recall and ownership attach to each serial number, so a quantity check on its own confirms very little. Each of the 32 exceptions is traced before the count is closed.
Watch out
Most gaps open where scanning stops.
It adds cost and answers no question anyone will ask.
Sealed cartons are accepted as proof of what is inside.
Keying errors across a large population need investigating later.
Units found with no record are never written down.
The trail ends at the warehouse door.
Two units with one number can mean relabelling or substitution.
Patron Accounting LLP. This page makes no regulatory statement.
Sources: general stock-control and audit practice; no rule or standard is stated on this page. General information, not professional advice.
Need help with serial number tracking? See our stock audit service. A stock audit counts serialised goods unit by unit.