Standard tags on steel
Many will not answer and look like missing assets.
Stock audit glossary · Fixed assets and tagging
noun · RFID stands for radio-frequency identification
An RFID tag is a label holding a small chip and antenna that sends its stored number by radio when a reader energises it. Because it needs no line of sight, it can be read through packaging and many tags can be read in one sweep, which sets it apart from barcode and QR labels. Passive tags have no battery and draw their power from the reader’s signal.
Meaning
Every printed label has to be seen to be read. An RFID tag removes that limit: a reader picks up tags inside cartons, behind panels or stacked out of view, and reads many at once instead of one by one. Where counting means moving things to reach a label, that is the saving.
Two physical limits decide whether it works. Metal reflects and detunes the signal, so a standard tag stuck to a steel surface may not answer at all; tags built to stand off metal exist for that case. Liquids absorb the signal, so tags next to filled containers read unreliably. The cost that is easiest to miss is not the tags but the readers and the software that turns a stream of reads into a list of what is present.
On the register
The register gains a field; verification changes shape.
In practice
Standard, on-metal or liquid-tolerant, chosen for where the tag will sit.
A unique number is written to the chip and entered on the asset’s register line.
The reader’s field powers passive tags, which send their number back; many answer in one sweep.
The system compares the numbers heard with what the register expects in that area.
Each tag not heard, and each heard but not expected, is checked on the floor before the register changes.
Worked example
Sample figures for one floor.
| Finding on the floor | Lines | Register treatment |
|---|---|---|
| Standard tag on a steel cabinet, asset present | 31 | Re-tag with an on-metal tag |
| Tag behind filled water containers, asset present | 7 | Move the tag; no change to the line |
| Asset moved to another floor | 9 | Update the location |
| Asset not found anywhere | 5 | Reported as missing after a search |
| Total not heard | 52 | Five truly unexplained |
Taken straight off the reader, the sweep says 52 assets are absent. After a walk round, 38 turn out to be tags that could not answer from where they were fixed, and nine are assets that had moved.
That is why a sweep result is an exception list to check, not a finding to post. The fix for the 38 lies in the labelling; the five lines left are what the verification is really about.
Watch out
Most problems can be seen before the order is placed.
Many will not answer and look like missing assets.
Reads come and go, so assets seem to vanish and return.
Readers and software turn out to be the larger cost.
The tag was near the reader, not necessarily where recorded.
Problems appear across the whole estate at once.
The chip and the printed label point to different lines.
Patron Accounting LLP. This page makes no regulatory statement.
Sources: general asset-tagging and verification practice; no statutory statement is made on this page. General information, not professional advice.
Need help with RFID tags? See our asset tagging service. Asset tagging chooses the tag type for each asset and links every tag to its register line.