Audit & Assurance Format
Internal audit report format
This is a layout for the report an internal auditor gives to the Board or the audit committee at the end of an internal audit cycle.
It has an executive summary, the scope, a rating scale, the observations with root cause and recommendation, management's action plan and a follow-up of earlier points. Use it to structure your own internal audit report, or to know what to expect from your internal auditor. Every name, date, amount and reference is shown as X. Internal audit reports have no prescribed legal format; this is a working layout, not an official ICAI form.
What this format is for and when it is used
An internal audit report records what the internal auditor tested in a period, what went wrong or could go wrong, and what management has agreed to do about it. It goes to the people who appointed the internal auditor (usually the Board or its audit committee) and to the heads of the departments that were reviewed.
ICAI's Internal Audit Standards Board issues Standards on Internal Audit (SIAs), which include guidance on reporting. The Standards are not yet mandatory: the ICAI Council has said they will become mandatory from a date it will notify, and no date had been notified as of 30 October 2026. This format follows the usual order of an internal audit report; it is not a form the law prescribes.
Whether your company must have an internal audit at all is covered on our internal audit service page.
How to use this format:
- Fill the cover and the scope first, so the reader knows which period, locations and processes were covered.
- Write each observation in the observation sheet with its rating, root cause, recommendation and management response.
- Write the executive summary last, from the observation sheet.
- Close with the follow-up of earlier observations, so the committee sees what has actually been fixed.
The format
The format (sample)
Sample document. It shows the usual layout only and is not an official form or professional advice. Your auditor adapts the wording before anything is signed.
INTERNAL AUDIT REPORT
XXXX XXXXXXX Private Limited
Process / area: XXXX XXXXXXX · Period covered: XX.XX.XXXX to XX.XX.XXXX · Report no.: XX/XXXX-XX · Report date: XX.XX.XXXX
Distribution: Audit Committee / Board of Directors; Managing Director; Chief Financial Officer; Head: XXXX XXXXXXX
1. Executive summary
We carried out the internal audit of XXXX XXXXXXX for the period XX.XX.XXXX to XX.XX.XXXX as per the internal audit plan approved on XX.XX.XXXX. Overall assessment: XXXX (Satisfactory / Needs improvement / Unsatisfactory).
| Rating | Number of observations | Agreed actions due within XX days |
|---|---|---|
| High | XX | XX |
| Medium | XX | XX |
| Low | XX | XX |
Key matters for the committee's attention:
1. XXXX XXXXXXX XXXX (Observation X.X)
2. XXXX XXXXXXX XXXX (Observation X.X)
2. Scope, period and approach
• Areas and locations covered: XXXX, XXXX, XXXX
• Areas excluded and why: XXXX
• Approach: walkthrough of the process, review of policies and delegation of authority, test of controls on a sample of XX transactions out of XXX, data analysis of XXXX, discussions with process owners.
• Data and records relied on: XXXX XXXXXXX (system extract dated XX.XX.XXXX)
3. Rating scale used
| Rating | Meaning |
|---|---|
| High | A control gap that could cause a material loss, misstatement or legal non-compliance; needs action within XX days |
| Medium | A control weakness that should be fixed within XX days |
| Low | An improvement point; action at management's discretion |
4. Detailed observations
| No. | Observation | Risk / impact | Root cause | Rating | Recommendation | Management response | Action owner | Target date |
|---|---|---|---|---|---|---|---|---|
| X.X | XXXX XXXXXXX XXXX (XX of XX samples) | XXXX XXXXXXX | XXXX XXXXXXX | High | XXXX XXXXXXX | Agreed / Not agreed: XXXX | XXXX (Designation) | XX.XX.XXXX |
| X.X | XXXX XXXXXXX XXXX | XXXX XXXXXXX | XXXX XXXXXXX | Medium | XXXX XXXXXXX | XXXX | XXXX | XX.XX.XXXX |
Amount involved (where measurable): ₹XX,XX,XXX
5. Status of earlier observations
| Report / obs. no. | Observation (short) | Agreed action | Target date | Status | Comment |
|---|---|---|---|---|---|
| XX/XXXX-XX / X.X | XXXX XXXXXXX | XXXX | XX.XX.XXXX | Closed / Open / Partly closed | XXXX |
6. Limitations
Our work was based on samples and on the records and explanations given to us. It is not designed to detect every weakness or fraud. This report is for the internal use of the Company's management and Audit Committee.
Sign-off
For XXXX & XX, Chartered Accountants (Internal Auditors) / XXXX (Head: Internal Audit)
(Signature) XXXX XXXXXXX, Partner / Designation
Place: XXXXXX · Date: XX.XX.XXXX
Discussed with management on: XX.XX.XXXX · Management representative: XXXX XXXXXXX (Designation)
Clause by clause
What each part says
- Cover and distribution
- Names the company, the area reviewed, the period and who receives the report. A report that goes only to the people being reviewed, and never to the Board or committee, loses most of its value.
- Executive summary
- One page for the committee: the overall view, the count of observations by rating and the two or three matters that need its attention. Readers who stop here should still know what matters.
- Scope, period and approach
- Says what was and was not covered, and how, for example a test of XX samples. Without it, a reader cannot tell whether "no exceptions" means the area is clean or simply was not tested.
- Rating scale
- Defines High, Medium and Low in terms of impact and the time allowed to fix. Keep the same scale across reports so the committee can compare cycles.
- Detailed observations
- Each row should stand on its own: what was found (with the sample count), why it matters, why it happened (the root cause), what to do, and management's answer with a named owner and date. Writing the root cause stops the same point coming back next cycle.
- Status of earlier observations
- Lists the open actions from previous reports and whether they are closed. This is how an internal audit shows results over time.
- Limitations and sign-off
- Records that the work was sample-based and who signed. An internal auditor may be a chartered accountant or cost accountant, a firm, or another professional the Board decides, and may be an employee; the sign-off block covers both an outside firm and an in-house head of internal audit (Section 138(1); Rule 13, as amended in 2016: an individual, a partnership firm or a body corporate, and a CA or cost accountant whether in practice or not).
Other documents
When a different document is needed
- Before the audit starts The internal audit plan and the audit programme set the scope and the tests; see audit programme / audit plan format.
- Checking a process step by step Use a checklist alongside this report; for the year-end statutory audit see statutory audit checklist template.
- The statutory auditor's report on the accounts That is a different report with a set structure; see independent auditor's report format.
- Your lender or regulator has its own format Use theirs: a bank's stock or concurrent audit report, for example, follows the bank's own format.
No sign-up needed. Every value in the files is shown as X.
Get it prepared by a CA. If you want the internal audit done and this report prepared for your Board, see our internal audit service. You can also call +91 945 945 6700.
Review and sources
Sources
- ICAI Internal Audit Standards Board, Compendium of Standards on Internal Audit, as on 1 Oct 2022
Talk to a CA
Get it prepared by a CA
Talk to a CA
Leave your details and we will call you back.
By sending this form you agree to our privacy policy.
