This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- West Coast Paper Mills asked the rate on debarked eucalyptus, acacia, casuarina and subabul pulpwood.
- The Authority held the pulpwood falls under HSN 4403 as wood in the rough.
- The rate is 9% CGST and 9% KGST, or 18% IGST on inter-State supplies.
- The company's claim that the wood is waste or scrap taxable at 2.5% was rejected.
In short
Pulpwood is the wood that paper mills buy to turn into pulp. West Coast Paper Mills Ltd, a paper maker in Karnataka, asked the tax authority which GST rate applies to four kinds of this wood: eucalyptus, acacia, casuarina and subabul. The vendors were charging 9% CGST and 9% SGST, and the company believed the goods were waste and should be taxed at a lower rate.
What has changed
How it worked before
Vendors selling pulpwood to paper mills were charging 9% CGST and 9% SGST, treating it as wood in the rough. The buyer disputed this and argued the wood was waste and scrap taxable at 2.5%. The position was contested, and no settled answer was available to buyers.
What has changed
The Authority rejected the waste argument. It described the goods as wood poles of 4 to 5 feet, which may or may not have bark. Because they are not fuel wood, chips or sawdust, and because they are split, they fall under HSN 4403 as wood in the rough. That attracts 9% CGST and 9% KGST, and 18% IGST on inter-State purchases. In practice, a mill buying this kind of pole-form pulpwood should expect the 9% plus 9% rate, not 2.5%.
Who this affects
Paper and paper board makers, and pulpwood suppliers and farm-contract buyers, who buy eucalyptus, acacia, casuarina or subabul wood in pole form, especially from vendors in Karnataka and other States.
An example
A paper unit in Tamil Nadu buys eucalyptus poles of about 5 feet from farmers under a contract farming arrangement. It asks whether the 9% plus 9% rate applies to these poles or whether it can claim the 2.5% rate on waste. This ruling suggests that poles of this size and form are wood in the rough under HSN 4403, so the 9% rate applies. The unit would still need to confirm that its wood matches the poles described in the ruling.
What you should do
Check whether your wood matches the ruling's description of 4 to 5 foot poles, split or debarked. A ruling binds only the applicant, West Coast Paper Mills Ltd, and its own tax office. It is not automatically law for your business, but you can cite it to your vendor or tax officer as the authority's view. If your wood is in chips, particles or sawdust, this ruling does not cover it, and you should get separate advice.
If you do nothing
If you assume this ruling covers your wood when it does not, you may pay the wrong rate and face a tax demand with interest from the department. A tax officer may check whether your goods match the description in the ruling and may decide they do not. Paying the wrong rate also means a higher cost on purchases, and if you have claimed a lower rate, you may have to pay the difference later.
The terms explained
- Advance ruling
- A decision by a state or central authority on how tax applies to one business's specific question, given before the business acts. It binds only the business that asked and its own tax office.
- Pulpwood
- Wood that is grown or cut to be turned into pulp, the raw material for paper. Here it refers to eucalyptus, acacia, casuarina and subabul wood.
- Wood in the rough
- Wood that has been roughly cut or shaped but not further processed, such as poles or logs. It is a tax classification used in HSN 4403.
- HSN code
- The Harmonised System of Nomenclature code, a standard number used to classify goods for GST. The rate on goods depends on which code they fall under.
- IGST
- Integrated Goods and Services Tax, charged on goods moved between States. Here it is 18% on inter-State purchases of this pulpwood.
The ruling in detail
Authority for Advance Ruling
M/s WEST COAST PAPER MILLS LTD.
Advance Ruling No. KAR ADRG 67/2019, Dated: 21st September, 2019 · Karnataka
Questions before the authority
- What is the rate of GST applicable on the following types of wood meant for pulping: (i) Debarked Eucalyptus Wood, (ii) Debarked Acacia Wood, (iii) Casuarina Wood, and (iv) Subabul Wood?
Facts
The applicant manufactures paper and paper boards and buys pulpwood of Eucalyptus, Acacia, Casuarina and Subabul, sourced from farmers, grown under contract farming, and procured from within Karnataka and from Maharashtra, Tamil Nadu and Andhra Pradesh. The applicant describes this pulpwood as the debarked or barked residue left after timber, poles and similar produce are converted, and argues it is wood waste and scrap. Vendors have been charging 9% CGST and 9% SGST by classifying it under HSN 4403 as wood in the rough, which the applicant considers wrong.
Ruling
| Question | What the authority ruled |
|---|---|
| GST rate on debarked Eucalyptus, debarked Acacia, Casuarina and Subabul pulpwood | HSN 4403; 9% CGST and 9% KGST; 18% IGST Rates are under entry 134 of Schedule III to CT(R) Notification 01/2017 dated 28.06.2017, the KGST equivalent dated 29.06.2017, and IGST(R) Notification 01/2017 dated 28.06.2017. The ruling does not separately address the four species, and it proceeds on the basis that the goods are poles of 4 to 5 feet that may or may not contain bark. |
The Authority held that the pulpwood supplied to the applicant falls under HSN 4403 as wood in the rough and is liable to **9% under the CGST Act and 9% under the KGST Act**. The inter-State (IGST) rate is 18%. The applicant's contention that the goods are wood waste and scrap taxable at 2.5% under entry 198 was not accepted.
Reasoning
The Authority treated the goods as wood poles of 4 to 5 feet, which may or may not have bark, and therefore within Chapter 44. It held they are not fuel wood under 4401 11 or 4401 12, not wood in chips or particles under 4401 21 or 4401 22 because they exceed 4 feet, and not sawdust or wood waste under 4401. It then held they fall under heading 4403 as wood in the rough, whether or not stripped of bark. Because the goods are split, the Authority held they cannot fall under heading 4404. Heading 4403 leads to entry 134 of Schedule III at 9%.
Provisions relied on
- Section 97 of the CGST Act, 2017 read with Rule 104 of the CGST Rules, 2017
- Section 97 of the KGST Act, 2017 read with Rule 104 of the KGST Rules, 2017
- Section 98(4) of the CGST Act, 2017 and Section 98(4) of the KGST Act, 2017
- Notification No. 01/2017 – Central Tax (Rate) dated 28.06.2017, entry 134 of Schedule III
- Notification (01/2017) FD 48 CSL 2017 dated 29.06.2017, entry 134 of Schedule III
- Notification No. 01/2017 – Integrated Tax (Rate) dated 28.06.2017, entry 134
- Entry 198 of Schedule I to Notification No. 01/2017 – Central Tax (Rate), relied on by the applicant (not accepted)
- Entry 113 of Schedule I to Notification No. 02/2017 – Central Tax (Rate), cited by the applicant
- HSN 4401, 4403 and 4404 and Chapter 44 of the Customs Tariff
For the practitioner
A purchaser of pulpwood from vendors who charge 9% CGST and 9% SGST can point to this ruling to support the 9% rate on debarked pulpwood of these species. The ruling settles that the applicant's wood-waste argument under entry 198 at 2.5% does not hold for these goods as classified. It does not deal with chips, sawdust or other waste forms of wood, and it turns on the Authority's description of the goods as 4 to 5 foot poles. Practitioners should confirm that the physical product matches that description before relying on it.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/kar_aar_67_2019_wcpml_21.09.19.pdf
Legibility of the scan, as read: high.
Prepared 09-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
