This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The company sent steel structures, zinc, nickel and furnace oil to a job worker for galvanising.
- The galvanised goods came back, but the consumables did not come back in their original form.
- Returning the galvanised goods counts as returning the inputs under section 143(1)(a).
- Consumables fully used up in galvanising are not treated as a supply under section 143(3).
- The ruling depends on proof that the consumables were entirely used up.
In short
A manufacturer sends steel to a job worker for galvanising, which means coating it with zinc. Along with the steel, it sends zinc, nickel and furnace oil for that work. Under GST, the rules on job work say that inputs sent to a job worker must come back within a time limit, or else the sending can be treated as a supply. The question was whether zinc and similar materials that are completely used up in the coating process must still be returned.
What has changed
How it worked before
Before this ruling, many manufacturers were unsure whether consumables sent to a galvaniser had to be sent back. Some assumed that every item sent out had to return in its original form, or the sending would be taxed as a supply. The position was not settled for materials that are used up during the process.
What has changed
The Authority said that the galvanised goods coming back satisfies the return requirement. It also said that zinc, furnace oil and nickel that are inseparable from the finished goods and entirely used up in galvanising do not need to come back, so they are not treated as a supply. In practice, a manufacturer can send such consumables without a return of the consumables themselves, but only if the consumables are fully consumed and the business can show that.
Who this affects
Manufacturers who send steel, metal parts or other goods to a job worker for galvanising, zinc coating, plating or similar processes, where the process uses up zinc, nickel, furnace oil or similar consumables.
An example
A cable tray maker sends steel frames and 500 kg of zinc to a galvaniser each month. The galvaniser returns the frames, and the zinc is used up in the coating and is not on the returned goods. The maker would ask whether it must get the zinc back or whether it can be treated as used in its own manufacturing. This ruling suggests that if the zinc is fully consumed and the maker can prove it from its records, the zinc need not be returned.
What you should do
Do not assume this ruling applies to you automatically. An advance ruling binds only the business that asked for it and the tax office that dealt with it, though other businesses can use it as a guide to how the department may think. Before relying on it, read the certified copy of the order and check the applicant and state details. Keep records showing how much zinc and other consumables were sent, how much was used, and that nothing was left over. If you are unsure, ask your tax adviser or seek your own advance ruling.
If you do nothing
If you treat a consumable as used up when it is not, the tax officer may treat the sending as a supply from you to the job worker, which means GST may be due on it. You may also have to pay interest and possibly a penalty. Because the ruling does not bind other businesses, relying on it without records gives you little protection.
The terms explained
- Job work
- Work done on goods owned by one business by another business, which returns the processed goods. Galvanising done by a coating contractor for a manufacturer is an example.
- Advance ruling
- A decision by a GST authority on one business's question before it acts, which binds only that business and its own tax office.
- Galvanising
- Coating steel or iron with a thin layer of zinc to stop rust.
- Inputs
- Raw materials, components and consumables used in making goods. Under this ruling, the term also covers intermediate goods in which such items are built into or used up in the product.
The ruling in detail
Authority for Advance Ruling
Ratan Projects & Engineering Co Private Limited
49/WBAAR/2018-19 dated 28/03/2019 · Tamil Nadu
Questions before the authority
- Whether dispatch of furnace oil, zinc and nickel sent to a job worker for galvanising is to be treated as a supply from the principal to the job worker if those consumables are not returned within the time allowed under section 143(1)(a) of the GST Act.
- Whether return of the galvanised steel structures to the applicant satisfies the condition of receiving back the inputs under section 143(1)(a).
Facts
The applicant manufactures cable trays, angle ladder trays and similar products mainly used for electrical works. It sends steel structures to a job worker for galvanising, along with furnace oil, zinc and nickel to be consumed in the process. The galvanised structures are returned, but the consumables are not returned in their original physical form.
Ruling
| Question | What the authority ruled |
|---|---|
| Whether return of the galvanised goods satisfies the receipt-back condition under section 143(1)(a) | Yes. Return of the galvanised goods to the applicant satisfies the condition of receiving back the inputs. The Authority treated galvanised goods as intermediate goods within the Explanation to section 143, so the inputs exhausted in making them need not be physically returned. |
| Whether furnace oil, zinc and similar consumables not returned physically are to be treated as supply under section 143(3) | No. They should not be treated as supply under section 143(3). This applies **provided they have been entirely used up** in the process of galvanising. Whether full consumption occurred is a question of evidence and records, which the Authority did not decide. |
The Authority held that return of the galvanised goods satisfies the requirement of receiving back the inputs under section 143(1)(a). It further held that the furnace oil, zinc and similar consumables, being inseparable from the galvanised goods, are not to be treated as a supply under section 143(3), provided they have been **entirely used up** in the galvanising process.
Reasoning
The Authority treated galvanising as an intermediate stage in the applicant's manufacturing, performed by a job worker under the job-work definition in section 2(68). Relying on the Explanation to section 143, it read 'inputs' to include intermediate goods in which inputs exhausted in their manufacture are embedded, attached or consumed. It therefore held that the zinc, furnace oil and nickel used up in galvanising need not be physically returned. It also relied on the CESTAT Kolkata decision in Rahee Infratech Ltd [2016 (339) ELT 293 Tri-Kolkata], which, in a Cenvat credit context, rejected the requirement that exhausted zinc be physically returned.
Provisions relied on
- Section 2(68) of the GST Act (definition of job work)
- Section 143(1)(a) of the GST Act (return of inputs sent to job worker)
- Section 143(3) of the GST Act (goods not returned treated as supply)
- Explanation to Section 143 of the GST Act (meaning of inputs, including intermediate goods)
- Section 97(2)(g) of the GST Act (admissibility of advance ruling)
- Section 103 of the GST Act (binding effect of ruling)
- Section 104(1) of the GST Act (ruling declared void)
- Rahee Infratech Ltd [2016 (339) ELT 293 Tri-Kolkata] (CESTAT Kolkata, persuasive authority cited)
For the practitioner
This ruling helps job-work principals who send consumables such as zinc, furnace oil or nickel to galvanisers, because consumables fully exhausted in galvanising need not be physically returned to avoid a section 143(3) supply. It does not decide how to establish full consumption, which remains a question of evidence and records, and it is not binding beyond this applicant. The listing gave the applicant as 'Value Max Polyplast' and the order as 'TN/10/AAR/2019 dated 27.02.2019', but the document is a West Bengal ruling in favour of Ratan Projects & Engineering Co Private Limited, so the listing should be checked before citing it.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/wb_49_2018-19_rpecpl_0.pdf
Legibility of the scan, as read: high.
Prepared 30-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
