Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91
    Advance rulings (AAR) Andhra Pradesh

    Leaf springs for tractor trailers: GST at 9% CGST and 9% SGST

    The GST authority ruled that leaf springs for tractor trailers fall under HSN 7320 at 9% CGST and 9% SGST, not the 12% agricultural machinery rate.

    Ruling
    Ruling No. AAR/AP/15 (GST)/2018 in Application No. AAR/20 (GST)/2018, dated 9th October 2018
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. Trailor Springs, an Andhra Pradesh maker of tractor trailers, asked for a GST advance ruling on rates.
    2. The company first listed leaf springs, disks, axles, hubs and shackle pins, then narrowed the question to leaf springs.
    3. The authority rejected the 12% agricultural machinery entry under HSN 8433.
    4. Based on the product description and photographs, the leaf springs fall under HSN 7320 at 9% CGST and 9% SGST.
    5. The ruling does not decide the rate for disks, axles, hubs or shackle pins.

    In short

    Trailor Springs, an Andhra Pradesh maker of tractor trailers and leaf springs, asked the GST advance ruling authority which tax rate applies to its parts. The company wanted to know whether leaf springs and other tractor trailer parts fall under the agricultural machinery rate. The question was whether the goods are agricultural machinery parts or simply iron and steel springs.

    What has changed

    How it worked before

    The company itself had argued that its parts fall under the agricultural machinery entry, HSN 8433, which carries a 12% rate. Many makers of tractor trailer parts probably assumed the same lower agricultural rate applied to their products. The ruling shows that assumption was not safe for leaf springs.

    What has changed

    The authority held that the 12% entry under HSN 8433 does not cover the company's products. It classified the leaf springs as springs and leaves for springs of iron and steel under HSN 7320, taxed at 9% CGST and 9% SGST. In practice, a leaf spring that matches this description is taxed as an iron and steel spring, not as a farm machinery part.

    Who this affects

    Makers and sellers of leaf springs or other suspension springs for tractor trailers and similar vehicles, who currently charge or assume the agricultural machinery rate.

    An example

    A workshop in Andhra Pradesh makes leaf springs for tractor trailers and wonders whether it can charge 9% CGST and 9% SGST like Trailor Springs. Its springs match the ruling's description and it is sold for the same use. The ruling suggests HSN 7320 at 9% CGST and 9% SGST is the likely answer, but the workshop should still check its own product details before relying on it.

    What you should do

    Compare your product with the one in the ruling, using its description and photographs, before changing your rate. Remember that this ruling binds only Trailor Springs and its own tax office; it is not automatically the law for your business or for officers in other states. If your product differs, or if you are unsure, seek your own advance ruling or professional advice before changing your invoices.

    If you do nothing

    If you assume this ruling covers your product and it does not, your tax officer is not bound by it and may assess a different rate. You could be asked to pay the shortfall, with interest and possibly a penalty. Correcting invoices after the fact is usually more costly than getting the classification right from the start.

    The terms explained

    advance ruling
    A decision by a GST authority, on request, about how a tax applies to a specific business's planned or existing activity. It binds only the business that asked and its own tax office.
    HSN code
    A standard numbering system for classifying goods, used to decide which GST rate applies. Two products can look similar but fall under different codes.
    CGST and SGST
    The central and state parts of GST. For an intra-state sale, the total rate is shared equally between the two.
    jurisdictional officer
    The tax officer who handles a particular business's GST affairs in its area. The ruling binds that officer for the business that asked.

    The ruling in detail

    Authority for Advance Ruling

    M/s Trailer Springs (GSTIN: 37AABFT2219F1ZG)

    Ruling No. AAR/AP/15 (GST)/2018 in Application No. AAR/20 (GST)/2018, dated 9th October 2018 · Andhra Pradesh

    Questions before the authority

    • What is the applicable rate of tax on agricultural tractor trailer parts, namely leaf springs, disks, axles, hubs and shackle pins meant for tractor trailers? The applicant later confined the ruling sought to leaf springs for tractor trailers.

    Facts

    The applicant is a manufacturer of tractor trailers and leaf springs. It sought a ruling on the rate of tax for parts of tractor trailers, initially listing leaf springs, disks, axles, hubs and shackle pins. At the personal hearing on 14th September 2018, it confined the question to leaf springs meant for tractor trailers and filed photographs of its products. The jurisdictional officer reported that no proceedings were pending on the issue.

    Ruling

    QuestionWhat the authority ruled
    Rate of tax on leaf springs for tractor trailers (question confined by applicant at hearing)HSN 7320; entry 234, Schedule III of notification 01/2017-CT(Rate) dated 28.06.2017; 9% CGST + 9% SGST
    The order's classification table shows a combined rate of 18%, while the operative ruling text states 9% CGST and 9% APGST. The ruling text governs. The order does not rule on disks, axles, hubs or shackle pins, as the applicant confined its question to leaf springs.

    The authority held that the HSN 8433 entry relied on by the applicant (entry 197 of Schedule II, 12%) does not apply to the applicant's products. Based on the description and photographs, it classified the goods as **springs and leaves for springs of iron and steel** under HSN 7320, entry 234 of Schedule III to notification 01/2017-Central Tax (Rate), taxable at **9% CGST and 9% SGST**.

    Reasoning

    The authority examined the entries cited by the applicant and found that HSN 8433 under entry 197 of Schedule II (12%) did not match the products manufactured. It relied on the applicant's own description and the photographs, which showed the goods to be springs and leaves for springs of iron and steel. On that basis it placed the goods under heading 7320 and entry 234 of Schedule III, and applied the 9% CGST and 9% SGST rates. The order does not give a detailed analysis of the tractor-trailer end use or of the other parts originally named.

    Provisions relied on

    • Section 98(1) of the CGST / APGST Act 2017 (forwarding of application to jurisdictional officers)
    • Section 99 of the APGST Act 2017 (constitution of appellate authority)
    • Section 100 of the APGST Act 2017 (appeal against ruling)
    • Notification 01/2017-Central Tax (Rate) dated 28.06.2017, Schedule III, entry 234 (HSN 7320)
    • Notification 01/2017-Central Tax (Rate), Schedule II, entry 197 (HSN 8433 90 00 and related parts), considered and rejected
    • HSN 8433.59.00 (entry 63 as described by the applicant), considered and rejected

    For the practitioner

    A practitioner dealing with leaf springs for tractor trailers can cite this ruling for the position that such springs fall under HSN 7320 at 9% CGST and 9% SGST, not under the agricultural machinery entries. It does not decide the rate for disks, axles, hubs or shackle pins, which the applicant dropped from the question. The ruling binds only the applicant and rests on the photographs and description filed, so it should be checked against the facts of any other client's product.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/ap_15-2018_09.10.18_ts.pdf

    Legibility of the scan, as read: high.

    Prepared 25-10-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this ruling mean I can charge 9% CGST and 9% SGST on my tractor trailer parts?

    Only if your product is substantially the same as the leaf springs in this ruling. The ruling applies only to Trailor Springs and its own tax office, so check your own product before changing your rate.

    What rate applies to disks, axles, hubs and shackle pins?

    The ruling does not decide this. The company dropped those items from its question before the hearing, so the authority did not rule on them.

    Is this ruling binding on tax officers in other states?

    No. The ruling binds only the business that asked and its own tax office. Officers in other states are not bound by it, though they may consider the reasoning.

    Why did the authority reject the 12% agricultural machinery rate?

    The authority found that the HSN 8433 entry did not match the goods, based on the company's description and photographs. It classified them as iron and steel springs instead.

    Can this ruling be challenged?

    The ruling can be appealed under section 100 of the APGST Act, 2017, which provides for an appeal against an advance ruling.