This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- Government-only exemption under Entry 64 does not cover a non-governmental charity.
- NCVT-affiliated trades run by an affiliated institute qualify as approved vocational education courses.
- Those four trades get a NIL GST rate under Sr. No. 66(a) of Notification 12/2017.
- A JSS-recognised course was not covered because no evidence of recognition was given.
- Informal trades certified only by the charity's own certificate were not covered.
In short
This GST advance ruling from Maharashtra asks whether vocational training courses run by a charity can be exempt from GST. The company runs courses mainly for leprosy-affected persons and their families at its Nashik centre. The authority separated the courses into three groups, with only one group getting the exemption.
What has changed
How it worked before
The order does not say how such courses were generally treated before this ruling. It does show that the company's first argument, that its courses fell under Entry 64, was rejected because that entry covers only government bodies.
What has changed
The authority held that Entry 64 applies only to Central or State Governments, Union Territories and local authorities, so a charity cannot use it. It held that the four NCVT-affiliated trades (Diesel Mechanic, COPA, Welder and Motor Mechanic) qualify as approved vocational education courses under Sr. No. 66(a) and so attract a NIL rate. The JSS-recognised course and the informal trades were not covered. The order does not decide whether the exemption is limited to the seats sanctioned by DGET, or whether the affiliations are still valid today.
Who this affects
Charities, trusts and NGOs that run vocational training courses, especially those teaching trades that are affiliated with NCVT or recognised under the Jan Shikshan Sansthan scheme, or those that issue their own certificates.
An example
A welding training trust in Pune runs an NCVT-affiliated welder course through its own affiliated training centre, and it also runs a short course that only its own certificate covers. It would ask whether its welder course gets the NIL rate and whether its own-certificate course does too. This ruling suggests the welder course may qualify, because that is the kind of course the authority accepted, but the trust would still need to prove its affiliation. The own-certificate course is not covered by this ruling.
What you should do
Do not treat this ruling as law for your business. It binds only the Leprosy Mission Trust of India and its own tax office, and other tax offices are not bound by it. Check whether your course is run by an institute affiliated to NCVT or a State Council, and keep documents that prove it. If you rely on JSS recognition or your own certificate, get written evidence first. Confirm current affiliation and seat limits with your tax adviser before claiming NIL rate.
If you do nothing
If you assume this ruling covers your courses when it does not, your tax officer may test your claim against the facts of your own course. The officer may reject the NIL rate and demand the GST you did not charge, together with interest. Because this ruling binds only the company that asked, you cannot rely on it to defend a claim of your own.
The terms explained
- advance ruling
- A decision by a GST authority on a specific business's question before it acts. It binds only the business that asked and its own tax office.
- NCVT
- The National Council for Vocational Training, a national body that affiliates and recognises vocational trades and training centres.
- Jan Shikshan Sansthan (JSS)
- A government-supported scheme that runs adult and vocational education centres. Courses under it may be recognised for training purposes.
- approved vocational education course
- A vocational course that is run by an institute affiliated to NCVT or a State Council, which can qualify for the GST exemption.
The ruling in detail
Authority for Advance Ruling
THE LEPROSY MISSION TRUST OF INDIA
NO.GST-ARA-116/2018-19/B-44, Mumbai, dt. 26/04/2019 (the date is handwritten on the scan and reads 26/04/2019) · Maharashtra
Questions before the authority
- Whether services provided under vocational training courses recognized by National Council for Vocational Training (NCVT) or Jan Shikshan Sansthan (JSS) are exempt either under Entry No. 64 of the exemption list of the Goods and Service Tax Act 2017 or under the 'Educational Institution' definition in Notification 22/Central Tax (Rate)?
- Whether services provided under vocational training courses provided by the applicant are exempt under Entry No. 66 of 'Notification 22/2017 - Central Tax (Rate)' (raised in the additional submissions dated 03.04.2019; the order's reasoning refers to Notification 12/2017 CT (Rate)).
Facts
The applicant, an NGO registered under section 12A of the Income Tax Act 1961, runs vocational training courses at its Nashik centre, mainly for leprosy-affected persons and their families. The formal NCVT-affiliated trades are Diesel Mechanic, COPA, Welder and Motor Mechanic. The applicant also runs a 2/3 wheeler mechanic course it describes as JSS-recognized, along with informal trades (offset printing, electrician and wiring, tailoring) certified only by the applicant's own TLM certification. The applicant sought a ruling on whether these courses are exempt.
Ruling
| Question | What the authority ruled |
|---|---|
| Exemption under Entry 64 of the exemption list, or under the 'educational institution' definition in Notification 22, for services under NCVT or JSS-recognized vocational courses | No (answered in the negative) Entry 64 covers services by the Central or State Government, a UT or a local authority, and the applicant is none of these. The applicant does not fall within clauses (i) or (ii) of the educational institution definition. |
| Exemption under Entry No. 66 (Sr. No. 66(a)) of Notification 12/2017 CT (Rate) for the applicant's vocational training courses | Exempt for Diesel Mechanic, COPA, Welder and Motor Mechanic only, under Sr. No. 66(a) Exemption applies because these are NCVT-affiliated courses run by an industrial training institute or centre, which makes them approved vocational education courses. The JSS 2/3 wheeler course was not supported by evidence, and the informal trades are not covered. |
The authority answered Question 1 in the negative: services under NCVT or JSS-recognized courses are not exempt under Entry 64 or under the educational institution definition in Notification 22. On Question 2, it held that only the Diesel Mechanic, COPA, Welder and Motor Mechanic courses are **exempt under Sr. No. 66(a) of Notification 12/2017 CT (Rate)**. The order does not extend that exemption to the JSS course or the informal trades.
Reasoning
The authority held that Entry 64 applies only to services by Central or State Governments, UTs or local authorities, so it cannot benefit a non-governmental applicant. It then tested the 'educational institution' definition, noting that the applicant falls only within clause (iii), which requires education as part of an approved vocational education course. Under the definition of that term, a course run by an industrial training institute or centre affiliated to NCVT or a State Council qualifies. The four NCVT-affiliated trades met this test, so their services fall within Sr. No. 66(a) and attract a NIL rate. The JSS course was not supported by any evidence of recognition, and the informal trades were conceded by the applicant to be non-recognized, so the exemption was not extended to them.
Provisions relied on
- Notification 12/2017 CT (Rate) dated 28.06.2017, Entry 64 (exemption list)
- Notification 12/2017 CT (Rate) dated 28.06.2017, Sr. No. 66(a) and the proviso to Sr. No. 66
- Notification 12/2017 CT (Rate), definition of 'educational institution' (clause 2(y))
- Notification 12/2017 CT (Rate), definition of 'approved vocational education course' (clause 2(h))
- Notification 22/Central Tax (Rate) dated 28.06.2017 (cited by the applicant for the definitions)
- Apprentices Act, 1961 (designated trades)
- Section 98 of the CGST Act 2017 and the MGST Act 2017 (ruling power)
For the practitioner
A practitioner advising a charitable training provider can use this order to show that NCVT-affiliated courses run by an affiliated institute can qualify as approved vocational education courses and so get NIL rate under Sr. No. 66(a). The order does not decide whether a JSS-recognized course qualifies, since the applicant gave no evidence of recognition, and it does not deal with informal or self-certified trades. The concerned officer had also asked whether the exemption is limited to the strength sanctioned by DGET and whether the affiliations remain valid today, and the order does not answer either point. The ruling binds only the applicant.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/maharashtra_aar_116_2018-19_tlmti_26.04.19.pdf
Legibility of the scan, as read: medium.
Prepared 02-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
