This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- TCPL Packaging asked which GST rate applies to corrugated blanks supplied flat with creases.
- The Authority held these blanks fall under Chapter Heading 4819 and attract 12% GST.
- Printed flat items such as hanging cards, without creases, fall under Chapter Heading 4823 at 18%.
- The Authority did not rely on the local tax officer's reply, which it found cryptic and unsupported.
- The ruling binds only TCPL Packaging and its own tax office in Maharashtra.
In short
This GST (goods and services tax) advance ruling from Maharashtra asked whether a company's corrugated cut-to-size blanks belong to the lower-rate heading for cartons or the higher-rate heading for other paper articles. The blanks are flat sheets with fold lines, which customers fold into boxes themselves. The company also asked the same about printed flat items such as hanging cards.
What has changed
How it worked before
The company itself had been paying 18% GST on its blanks under Chapter 4823, while competitors were charging 12% under Chapter 4819. The position was unsettled, and businesses selling similar flat packaging had no clear authority on which heading applied.
What has changed
The Authority held that the blanks are foldable on three sides, glued on the fourth, and can be made into cartons by the customer without technical skill. Under Rule 2(a) of the Harmonised System interpretation rules, unassembled articles with the essential character of the finished article are classified as that article, so the blanks fall under Chapter 4819 at 12%. Printed flat items without creases are articles of paper cut to size and stay under Chapter 4823 at 18%. The Authority also set aside the local tax officer's reply, which cited Notification No. 1/2017-Central Tax (Rate) without explaining how it applied.
Who this affects
Manufacturers who supply corrugated sheets cut to size and creased for customers to fold into boxes, and printers who sell flat printed items such as hanging cards or display cards.
An example
A Pune company makes corrugated sheets cut to size with fold lines, which a snack maker folds into shipping boxes. The company would ask whether it can charge 12% GST as TCPL did. The ruling suggests that creased blanks supplied flat and foldable into cartons fall under the 12% heading. However, the company's own tax officer is not bound by this ruling, so it should confirm the position before billing at 12%.
What you should do
Check whether your product matches the facts: corrugated material, creases at fixed points, supplied flat, and folded by the buyer. Even then, this ruling binds only TCPL Packaging and its own tax office, so it is not automatically the law for your business. Ask your tax adviser to check your product against it, and if you are unsure, consider applying for your own advance ruling before changing your rate.
If you do nothing
If you charge 12% on a product that a tax officer later places under 18%, you may be asked to pay the shortfall. Interest and penalties can be added on top of the unpaid tax. Relying on a ruling that was made for another business is a risk you carry yourself.
The terms explained
- advance ruling
- A written decision from a GST authority on how the law applies to one business's specific question, issued before the business acts on it. It binds only the business that asked and its own tax office.
- Chapter Heading 4819
- The part of the tariff classification list covering cartons, boxes and cases made of corrugated paper or paperboard. Products under this heading were taxed at 12% in this ruling.
- Chapter Heading 4823
- The part of the tariff classification list covering other paper and paperboard cut to size or shape, and other paper articles. Products under this heading were taxed at 18% in this ruling.
- essential character
- The features that make an item what it is, so an unassembled or flat item is treated as the finished article if it keeps those features. Here, creased blanks were held to keep the essential character of cartons.
- jurisdictional officer
- The tax officer responsible for a business's registration and area. Their reply to a question does not bind the Authority for Advance Ruling.
The ruling in detail
Authority for Advance Ruling
TCPL Packaging Limited
NO.GST-ARA-105/2018-19/B-33, Mumbai, dated 22/03/2019 (the serial "33" is handwritten and the date is partly stamped; read as 22/03/2019) · Maharashtra
Questions before the authority
- Whether the packaging materials viz. cut to size blanks manufactured by TCPL with corrugation and having requisite creases at designated places, supplied to the Customers in flat form with folding, can be categorized under Tariff Item Code no 4819 and subject to GST @ 12%?
- What would be the appropriate categorization and GST Rate of printed materials which are in flat form, e.g. hanging cards, without creases having corrugation and supplied to customer in flat form?
Facts
TCPL manufactures folding cartons, printed blanks and outers, litho laminations, plastic cartons, blister packs and shelf-ready packaging, all customised to customer requirements. It supplies corrugated cut-to-size blanks in flat form, which the customer folds at the creases into cartons or boxes to hold goods, and also supplies printed flat items such as hanging cards. The applicant had been paying 18% on the blanks under Chapter 4823, while competitors charged 12% under Chapter 4819, and it sought clarity on both product categories.
Ruling
| Question | What the authority ruled |
|---|---|
| Corrugated cut-to-size blanks with creases, supplied flat and folded by the customer into cartons | **Answered in the affirmative: Tariff Item Code 4819, GST @ 12%** The essential character of the blanks remains that of cartons or boxes to hold goods, though manual or mechanical folding is required. Blanks are supplied flat for transport efficiency and cannot be used in any other form. |
| Printed flat materials such as hanging cards, without creases, having corrugation, supplied in flat form | **Chapter Heading 4823, GST @ 18%** The order's answer refers to items "without creases having corrugation", which follows the wording of the question. The reasoning treats them as articles of paper cut to size or shape. |
The Authority held that the corrugated cut-to-size blanks, supplied flat with requisite creases, are classifiable under Chapter Heading 4819 and attract GST at 12%. It held that printed flat items such as hanging cards, without creases, are articles of paper cut to size and fall under Chapter Heading 4823 at 18%. The jurisdictional officer's reply was not taken into account as it was cryptic and without basis.
Reasoning
The Authority compared Chapter Headings 4819 and 4823 and considered the samples, finding that the blanks are foldable on three sides, glued on the fourth, and can be made into cartons by the customer without technical expertise. It applied Rule 2(a) of the General Rules for the Interpretation of the Harmonised System, which covers unassembled or disassembled articles that have the essential character of the finished article, relying on the applicant's authorities, CC v. Sony India, Motor Industries Co. Ltd. v. Assistant Collector of Customs and Atul Glass Industries v. CCE. The Authority accepted the applicant's view that the blanks retain the essential character of cartons. For the printed flat items, it found them to be articles of paper cut to size or shape, clearly within Chapter 4823. The Authority declined to rely on the jurisdictional officer's reply, which cited Notification No. 1/2017-Central Tax (Rate) without discussion.
Provisions relied on
- Section 97 and Section 98 of the CGST Act, 2017 and the MGST Act, 2017
- Rule 2(a) of the General Rules for the Interpretation of the Harmonised System
- Chapter Heading 4819 (cartons, boxes and cases of corrugated paper or paperboard)
- Chapter Heading 4823 (other paper, paperboard, cut to size or shape; other articles of paper pulp, paper and paperboard)
- Notification No. 1/2017-Central Tax (Rate) dated 28 June 2017, cited by the jurisdictional officer and the parties
- CC v. Sony India [2008 (231) ELT (SC)]; Motor Industries Co. Ltd. v. Assistant Collector of Customs [1992 (62) ELT 13]; Atul Glass Industries Pvt. Ltd. v. CCE [1986 (3) SCC 480], as cited by the applicant
For the practitioner
The order supports a 12% rate under Chapter 4819 for corrugated blanks that are supplied flat with creases and folded by the customer into cartons, which helps manufacturers in this position who face competitor pricing. It also confirms 18% under Chapter 4823 for printed flat items such as hanging cards. The ruling is confined to the specific products before the Authority and does not settle how Rule 3(b) or the Circular on printing services (dated 20.10.2017, cited by the applicant) applies to other printed packaging, since the order does not discuss them.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/ara_order_105_2018_maharashtra_tcpl.pdf
Legibility of the scan, as read: medium.
Prepared 01-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
