This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The company asked whether its plastic seedling trays are exempt as agricultural implements.
- The authority said no: wholly plastic trays are not hand tools under heading 8201.
- The trays fall under tariff heading CTH 39269099, taxed at 9% CGST and 9% SGST.
- The trays are not parts of machinery, because the transplanter does not need them to work.
- The ruling binds only the company that asked and its own tax office.
In short
In GST advance ruling TN/16/AAR/2018, Saro Enterprises, a Tamil Nadu maker of plastic paddy seedling trays, asked whether they could be treated as exempt farm implements. The company argued that the trays were hand tools for agriculture, and that they had been exempt under the old state VAT. The question was whether a tray made wholly of plastic counts as an agricultural implement under GST at all.
What has changed
How it worked before
The company relied on its earlier state VAT exemption and argued that the trays belonged to the agricultural hand tools group, which carries an exemption under GST. Before this ruling, GST treatment of plastic seedling trays was not settled, so makers and sellers could not be sure which side of the line their product fell on.
What has changed
The authority held that plastic seedling trays are classified under CTH 39269099, which is taxed at 9% CGST and 9% SGST. Its reasons were that the hand-tool group covers only tools with a working part of base metal, metal carbides or cermets, and these trays are wholly plastic. It also held that the trays are not parts or accessories of agricultural machinery. In practice, a maker or seller of wholly plastic seedling trays should expect the authority's reasoning to point to 9% CGST and 9% SGST, not an exemption.
Who this affects
Manufacturers and dealers of plastic seedling trays for paddy transplanting, especially those selling to farmers and small dealers, and any business whose tax officer has questioned whether such trays are exempt agricultural implements.
An example
A small tray maker in Madurai sells wholly polypropylene paddy seedling trays to farmers and wonders whether it can still charge no GST as an agricultural implement. The ruling suggests that wholly plastic trays used by hand fall under CTH 39269099 at 9% CGST and 9% SGST. The maker should therefore check its billing with its tax adviser, since its own tax office is not bound by this ruling but may follow the same reasoning.
What you should do
Do not treat this ruling as law for your business. It applies only to Saro Enterprises and its own tax office, though its reasoning shows how the department may view similar goods. Check your product against the facts here: wholly plastic trays used by hand are the case decided, while trays with base metal parts or trays built into machines were not decided. If your product is close to these facts, speak to your tax adviser before filing, and consider asking for your own advance ruling if the question is unclear.
If you do nothing
If you assume the exemption still applies after this ruling, a tax officer may treat your trays as taxable at 9% CGST and 9% SGST and demand the unpaid tax. The cost of being wrong is that tax, plus interest and possible penalties under GST law. Because the ruling does not bind your tax office, you may have to argue the point yourself after the demand.
The terms explained
- advance ruling
- A written decision by a GST authority on how a tax applies to one business's specific question, which binds only that business and its own tax office.
- heading 8201
- A group in the official tariff list covering hand tools for agriculture, which the company claimed its trays belonged to.
- CTH 39269099
- The customs tariff heading (CTH) for other articles of plastic, which the authority assigned to these trays. The code is used to decide the GST rate.
- base metals
- Common metals such as iron, copper or aluminium. The authority noted that plastics are not base metals, which is why the trays fell outside the metal hand-tool group.
The ruling in detail
Authority for Advance Ruling
Saro Enterprises
Order No. 16/AAR/2018 dated 27.09.2018 · Tamil Nadu
Questions before the authority
- Clarification on classification and taxability of Agricultural Seedling Tray under GST (the issue was framed as classification of agricultural seedling trays).
Facts
Saro Enterprises, a proprietary manufacturer, makes plastic seedling trays from recycled or pure polypropylene for paddy transplantation. The trays are sold to farmers and small dealers, are used manually to grow and carry seedling mats, and are not part of any machine. The applicant argued that they are agricultural implements under heading 8201, exempt under Sl. No. 137 of Notification No. 2/2017-Central Tax, as they had been exempt under TNVAT.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification and GST rate of plastic agricultural seedling trays manufactured by the applicant | CTH 39269099; 9% CGST and 9% SGST Rate taken from Sl. No. 111 of Schedule III of Notification No. 01/2017-C.T. (Rate) dated 28.06.2017 as amended, and Sl. No. 111 of Schedule III of G.O. (Ms) No. 62 dated 29.06.2017 for SGST. The trays are not classifiable under Chapter 82 or heading 8201, nor as parts or accessories of agricultural machinery. |
The authority held that Agricultural Seedling Trays made of plastic are classifiable under CTH 39269099. The applicable rate is **9% CGST** and 9% SGST. The trays were not treated as hand tools under Chapter 82 or heading 8201, because they are made wholly of plastic and not of base metal.
Reasoning
The authority read the classification explanations in Notification No. 01/2017-C.T. (Rate), which import the Customs Tariff Act and its interpretation rules. Under Section XV Note 3, 'base metals' do not include plastics, and Chapter 82 Note 1 and its Explanatory Notes cover only tools with a working part of base metal, metal carbides or cermets. Because the trays are wholly plastic, they fall outside Chapter 82 and heading 8201. The authority then applied the HSN Explanatory Note to heading 3926, which covers other plastic articles not elsewhere specified, and held that the trays are not parts or accessories of agricultural machinery because the transplanter does not need them to function.
Provisions relied on
- Notification No. 01/2017-C.T. (Rate) dated 28.06.2017, explanations (iii) and (iv), and Sl. No. 111 of Schedule III, as amended
- G.O. (Ms) No. 62 dated 29.06.2017, Sl. No. 111 of Schedule III (SGST)
- First Schedule to the Customs Tariff Act, 1975 and its rules of interpretation, including Section and Chapter Notes and General Explanatory Notes
- Section XV Note 3 (definition of base metals) of the Customs Tariff
- Chapter 82 Note 1 and Explanatory Notes to Chapter 82
- Heading 8201 (hand tools for agriculture), as claimed by the applicant and rejected
- Chapter 39, heading 3926 and CTH 39269099, with HSN Explanatory Note to heading 3926
- Notification No. 2/2017-Central Tax, Sl. No. 137 (cited by the applicant as the exemption basis, not accepted)
For the practitioner
This ruling is useful for manufacturers or dealers of plastic agricultural trays who face a claim that such goods fall under heading 8201 or the agricultural-implement exemption. It settles that wholly plastic seedling trays fall under CTH 39269099 at 9% CGST and 9% SGST. It does not decide the treatment of trays made of base metal, of other agricultural inputs, or of trays integrated into machinery. Its binding effect is limited to the applicant, and the order notes a 30-day appeal window under Section 100(1).
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn-16-aar-2018_saro_enterprises_1.pdf
Legibility of the scan, as read: medium.
Prepared 24-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
