Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91
    Advance rulings (AAR) Maharashtra

    GST advance ruling rejected for product not yet made: Saint-Gobain case

    The GST authority refused to rule on Saint-Gobain's unmade gypsum board, so its tax rate remains undecided.

    Ruling
    NO.GST-ARA-51/2019-20/B-38, Mumbai, dt. 17/03/2020
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. The company asked whether its planned glass-fibre gypsum board attracts 12% or 18% GST.
    2. The board had not yet been manufactured, and no samples had been tested.
    3. The Authority rejected the application at the threshold and did not decide the rate.
    4. An advance ruling needs an existing or proposed supply of goods, not just planned manufacture.

    In short

    A GST advance ruling is a written answer from the tax authority on how GST applies to a planned transaction, before it happens. Saint-Gobain India Private Limited asked whether a new glass-fibre reinforced gypsum board, with about 1% glass fibre, falls under the 12% slab or the 18% slab. It argued the lower rate applied because the glass fibre improves the board's strength.

    What has changed

    How it worked before

    The company already made paper-reinforced and glass-reinforced gypsum boards, so the new board was an extension of an existing line. Whether a business could seek an advance ruling on a product it had not yet made was not clear from this case alone. This order is an example of the answer being no.

    What has changed

    The Authority did not decide whether the board is 12% or 18%. It rejected the application because goods must exist for a supply to be undertaken or proposed, and proposed manufacture alone is not enough. In practice, a product that is still on paper, with no samples and no planned supply, may be turned away before the tax question is looked at.

    Who this affects

    Businesses developing a new product, or a new variant of an existing one, that they have not yet made or sold, and who want to know its GST rate before launch.

    An example

    A small firm plans to launch a new board that adds a light fibre content to its existing product. It has not yet made a sample, and it asks whether the 12% or 18% slab applies. Under this ruling, the Authority may reject the application at the threshold, as it did here. The firm should first make and test samples and confirm its supply, and then consider applying.

    What you should do

    A ruling binds only the company that asked and its own tax office, so it is not automatically the rule for you. If you have a new product, first make and test samples and set out the supply you plan to make, then consider whether to apply. Until then, check the rate against the entries in the rate notification and take advice from your tax adviser.

    If you do nothing

    If you assume this ruling settles your rate, you may apply the 12% slab on the strength of an order that never decided it. A tax officer may then apply the rate they consider correct, which could mean a demand for the tax difference, and possibly interest and penalties. Because the Authority did not decide the question, there is no protection to rely on.

    The terms explained

    advance ruling
    A written decision from a GST authority, given before a transaction, on how GST applies to it. It is binding only on the applicant and its own tax office.
    classification
    Deciding which official tax category or entry a product falls under, since each category can carry a different GST rate.
    HSN code
    A standard numbering system for goods, used to identify a product's tax category. HSN 6809 is the code the tax office compared with the company's claim here.
    maintainable
    Whether an application is valid enough to be considered at all. Here the Authority found it was not, so it never reached the rate question.

    The ruling in detail

    Authority for Advance Ruling

    M/s. Saint-Gobain India Private Limited

    NO.GST-ARA-51/2019-20/B-38, Mumbai, dt. 17/03/2020 · Maharashtra

    Questions before the authority

    • Whether the proposed product is classifiable as "Glass-fibre Reinforced Gypsum Board" and whether the applicant can avail the concessional rate of tax under Schedule II of Notification No. 1/2017-Central Tax (Rate)?

    Facts

    The applicant already manufactures paper-reinforced and glass-reinforced gypsum boards under Chapter 68 of the Customs Tariff Act. It proposes to manufacture a new glass-fibre reinforced gypsum board containing about 1% glass fibre, which it says is meant to improve flexural, tensile, compressive and impact strength. It argues the product falls under Sr. No. 92 of Schedule II (12%) rather than HSN 6809 under Sr. No. 180C of Schedule III (18%).

    Ruling

    The Authority held that the application is not maintainable and rejected it without deciding the classification or rate question. The product was not yet manufactured, no samples were furnished, and the advance ruling provisions require an existing or proposed supply of goods rather than proposed manufacture. The application was therefore rejected under sub-section (2) of Section 98 of the CGST Act.

    Reasoning

    The Authority relied on the definition of advance ruling in Section 95(a), under which the question must relate to a supply of goods or services being undertaken or proposed to be undertaken by the applicant. Section 97(2)(a) limits the questions to classification of goods or services in relation to such supply. The Authority observed that the goods must be in existence for supply to be undertaken or proposed, and that proposed manufacture alone does not meet this requirement. Because no samples had been tested, it also found no basis for a classification view, and it accepted the jurisdictional officer's submission that the question could not be decided at this stage.

    Provisions relied on

    • Section 95(a) of the CGST Act, 2017 (definition of advance ruling)
    • Section 97(2)(a) of the CGST Act, 2017
    • Section 98(2) of the CGST Act, 2017
    • Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017, Schedule II Sr. No. 92 and Schedule III Sr. No. 180C (cited by the applicant; not decided)

    For the practitioner

    This order is useful mainly as authority that an advance ruling application about a product not yet manufactured may be rejected at the threshold, because the Authority insists on an existing or proposed supply and tested samples. It does not decide whether glass-fibre reinforced gypsum board with a small glass-fibre content attracts 12% under Sr. No. 92 or 18% under HSN 6809. A practitioner advising on a similar new product should therefore establish the product and its supply first, or seek the ruling only once samples exist. The order does not address whether the quantity of glass fibre is relevant to the entry.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/mah_aar_51_2019-20_b-38_17.03.2020_sgipl.pdf

    Legibility of the scan, as read: high.

    Prepared 20-11-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this mean my new gypsum board gets the 12% rate?

    No. The Authority did not decide the rate. It rejected the application before examining whether the 12% or 18% slab applies.

    Is this order binding on my state or my tax office?

    No. An advance ruling binds only the company that asked and its own tax office. Other businesses and officers are not bound by it automatically.

    Can I get an advance ruling on a product I have not made yet?

    This order suggests not, at least not at the start. The Authority rejected the application because the goods did not yet exist and no samples had been tested. Making and testing samples first may be the safer route.

    Does the amount of glass fibre in the board change the answer?

    The order does not address this. The Authority did not look at the quantity of glass fibre, so it gives no guidance on whether a small glass-fibre content matters.