This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- A sugar mill roller maker asked whether converting customers' bare shafts is goods or services.
- The authority held it is a supply of goods, not a service.
- Because the maker adds substantial own material, job work treatment was not available.
- The declared value of the customer's shaft is included in the taxable value under Rule 27(b).
- The ruling does not decide the GST rate or HSN classification.
In short
A company that makes sugar mill rollers takes bare shafts and forged bars from customers, fits its own shells, grooves and rings, and returns finished rollers. It had billed this as a service at 18% GST. It asked the Maharashtra GST authority whether this is a supply of goods or of services, and whether the value of the customer's shaft should be part of the GST taxable value.
What has changed
How it worked before
The company had treated this work as a service under SAC 9988 at 18% GST, charging only its agreed fee. The ruling does not say how other makers in this line of work generally treated it, so the position was not settled for them.
What has changed
The authority held that converting a bare shaft or beam into a finished sugar mill roller, using the maker's own raw material, is a supply of goods. It also held that the value of the customer's shaft must be added to the taxable value, because the payment is not wholly in money. In practice, a maker who adds substantial material of its own cannot treat the work as job work, and may need to count the shaft's value when working out GST.
Who this affects
Makers and repairers of sugar mill rollers, and engineering workshops that convert shafts, beams or forged bars supplied by customers by adding their own shells, fittings or other material.
An example
A workshop in Pune receives a bare shaft from a sugar factory and adds its own shell, grooves and rings before returning the roller. The workshop would ask whether it is doing job work, which is generally treated differently for GST, or supplying goods. This ruling suggests that where the workshop adds substantial material of its own, the work is a supply of goods, and the value of the factory's shaft may need to be included in the taxable value.
What you should do
Check whether the work you do for customers adds substantial material of your own, and how your invoices treat the value of material the customer supplies. This ruling binds only S.B. Reshellers Pvt. Ltd. and its own tax office in Maharashtra. It is not automatically the law for your business, even if your work looks similar, so discuss your case with your tax advisor before changing how you bill.
If you do nothing
If you assume this ruling covers your work and treat it as job work or as a service, a tax officer may later decide the treatment was wrong. The officer may demand the unpaid tax, along with interest, and may impose a penalty. The ruling's conclusion is only a binding decision for the company that asked, so relying on it without checking your own facts can be costly.
The terms explained
- job work
- Work where one business sends goods to another for processing, and the processor returns the finished goods. The processor usually does not add substantial material of its own.
- advance ruling
- A written decision by a GST authority on one business's specific question, given before the business acts. It binds only that business and its own tax office.
- consideration not wholly in money
- A payment that includes something other than cash, such as goods or material supplied by the customer. The value of that non-cash part must be worked out and added to the taxable value.
- value of supply
- The amount on which GST is calculated for a supply. It is normally the price paid, but it can include other amounts in some cases.
The ruling in detail
Authority for Advance Ruling
S.B. Reshellers Pvt. Ltd.
NO.GST-ARA- 97/2018-19/B- 24, Mumbai, dt. 02/03/2019 (order number and date as printed; the '24' and the date appear handwritten and are only partly legible) · Maharashtra
Questions before the authority
- Whether the activity of converting bare shaft/beams supplied by the customer into a ready-to-use sugar mill roller, using the applicant's own raw material, is treatable as a supply of goods or as a supply of services.
- Whether the cost of the shaft/beam supplied by the customer is includible in the value of the said supply for the purpose of payment of GST.
Facts
The applicant manufactures sugar mill rollers from its own raw material and re-shells worn-out rollers sent by customers. Customers also send bare shafts, new shafts or forged bars, which the applicant converts into finished rollers by fitting its own shells, machining grooves and attaching rings and accessories before returning them. The applicant had treated this activity as a service under SAC 9988 at 18% GST on agreed charges, and it sought a ruling on whether the activity is a supply of goods or services and whether the customer-supplied shaft's cost is part of the taxable value.
Ruling
| Question | What the authority ruled |
|---|---|
| Q1: Whether converting customer-supplied bare shaft/beams into a ready-to-use sugar mill roller (using the applicant's own raw material) is a supply of goods or of services | Supply of goods The job work exception was held not to apply because the applicant's own material and skill are substantial, so the activity is not mere job work of minor additions to customer goods. |
| Q2: Whether the cost of the shaft/beam supplied by the customer is includible in the value of the said supply for payment of GST | Yes, includible (answered in the affirmative) Applies because the consideration is not wholly in money; the declared value of the bare shaft or beam is included under Rule 27(b) of the CGST Rules, 2017. |
The authority held that converting the bare shaft or beam into a ready-to-use sugar mill roller using the applicant's own raw material is a **supply of goods**, not a service. It further held that the cost of the shaft or beam supplied by the customer is **includible in the value of supply**, because the consideration is not wholly in money and the declared value of the customer-supplied input must be added under Rule 27(b).
Reasoning
The authority first examined whether the activity was job work under Section 2(68) and Section 143 of the CGST Act and Rule 45 of the CGST Rules. Relying on the CBEC flyer and the Supreme Court's decision in Prestige Engineering (India) v. CCE Merut (1994), it held that job work does not extend to a worker who supplies substantial material of its own and whose value is comparable to the customer's input, so the applicant was not a job worker. On valuation, it held that Section 15(1) does not apply because price is not the sole consideration, so Section 15(4) applies. Rule 27 was then found applicable, and since the open market value was not available, clause (b) of Rule 27 was held to bring the declared value of the customer's shaft or beam into the value of supply.
Provisions relied on
- Section 2(68) of the CGST Act, 2017 (definition of job work)
- Section 143 of the CGST Act, 2017 (job work procedure)
- Rule 45 of the CGST Rules, 2017
- Section 15(1), 15(2) and 15(4) of the CGST Act, 2017 (value of supply)
- Rule 27 (clauses (a) to (d)) of the CGST Rules, 2017 (consideration not wholly in money)
- Rule 55 of the CGST Rules, 2017 (challan for movement of goods; referred to by the applicant)
- Sections 97 and 98 of the CGST Act and MGST Act, 2017 (advance ruling procedure)
- Prestige Engineering (India) v. CCE Merut, 1994 (73) E.L.T. 497 (SC) (relied on for the job work analysis)
For the practitioner
A practitioner dealing with re-shelling or conversion of customer-supplied shafts can cite this order for the position that such work is a supply of goods where the contractor adds substantial own material, so job work treatment is not available. It also settles that the declared value of customer-supplied free-of-cost inputs is included in the taxable value under Rule 27(b). The order does not decide the GST rate or HSN classification, which the applicant had stated as 18% under HSN 8438, and it does not resolve whether a case with only minor additions would qualify as job work.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/ara_order_97_2018_sbrpl.pdf
Legibility of the scan, as read: medium.
Prepared 30-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
