Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    Gear motors are electric motors for GST, Tamil Nadu ruling says

    Tamil Nadu's advance ruling treats a gear motor sold as one integrated unit as an electric motor, taxed at 9% CGST and 9% SGST.

    Ruling
    ORDER No. 23/ARA/2019 Dated 22.05.2019 (as printed in the document; the listing reference reads TN/23/AAR/2019)
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. The company asked whether gear motors fall under heading 8483 (gearboxes) or heading 8501 (electric motors).
    2. The authority held that gear motors fall under heading 8501, the electric motor heading.
    3. The applicable rate was 9% CGST and 9% SGST under Schedule III, Serial No. 372.
    4. The authority refused to decide whether gear motors are 'gears' and 'gearings', as that question falls outside its remit.
    5. The ruling binds only the company that asked and its own tax office.

    In short

    In order TN/23/AAR/2019, the Tamil Nadu Authority for Advance Ruling (AAR) was asked how GST applies to gear motors. A gear motor combines a gearbox with an electric motor. The question was whether such a product belongs under the Customs Tariff heading (CTH) for gearboxes or the one for electric motors, and which GST rate applies.

    What has changed

    How it worked before

    The ruling does not describe how businesses generally classified gear motors before it was issued. The question was open, because a gear motor can be seen either as a gearbox or as a motor. Businesses selling these products had no settled answer to point to.

    What has changed

    The authority held that a gear motor is classified under the electric motor heading, CTH 8501, because its main job is turning electrical energy into mechanical energy. It rejected the company's argument that the product was a mix of a gearbox and a motor, since the purchase order and invoice showed one supply of an assembled unit. The rate applied was 9% CGST and 9% SGST, which is 18% in total. The authority did not answer whether gears and gearings are separately classifiable, because that question was outside the categories it can rule on.

    Who this affects

    Manufacturers, assemblers and importers that sell gear motors as one complete unit, with the gearbox and motor already combined, are the businesses most likely to have this question. Firms that import gearboxes and motors separately and join them at their own works may face a different question, which this ruling does not answer.

    An example

    A pump maker buys gearboxes from one supplier and motors from another, then assembles and sells them together under a single invoice. It asks whether it can use the electric motor rate for its product. The ruling suggests the answer depends on how the product is sold: the authority relied on a single purchase order and invoice for an integrated unit. If the maker sells the same integrated product on one invoice, the ruling points to the electric motor heading, but the maker should confirm this for its own facts.

    What you should do

    Check whether your product is sold as one integrated unit under a single order and invoice, since that was central to the authority's reasoning. Do not assume the ruling applies to you automatically. It binds only Rossi Gear motors India Private Limited and its tax office, and other tax officers are not bound by it. If your situation differs, or your tax officer takes a different view, seek a ruling for your own case or take advice from a tax professional.

    If you do nothing

    If you assume this ruling covers your product when it does not, your tax officer may classify the goods differently and demand the tax difference. Interest and penalties can apply on the amount short-paid. Checking your facts against the ruling before you file returns reduces this risk.

    The terms explained

    advance ruling
    A decision by a tax authority, given in advance, on how the law applies to one business's specific question. It binds only that business and its own tax office.
    Customs Tariff heading (CTH)
    A numbered category in India's customs tariff that determines how a product is classified. The classification decides which tax rate applies.
    gear motor
    A single unit that combines a gearbox, which changes speed and torque, with an electric motor that drives it.
    principal-function test
    A method of classifying a product made of several parts by asking what its main job is. The product is classed by that main function.
    mixed supply
    A sale of several items together that could be treated as separate supplies. The authority rejected this view for the gear motor, since it was sold as one assembled unit.

    The ruling in detail

    Authority for Advance Ruling

    M/s. Rossi Gear motors India Private Limited

    ORDER No. 23/ARA/2019 Dated 22.05.2019 (as printed in the document; the listing reference reads TN/23/AAR/2019) · Tamil Nadu

    Questions before the authority

    • Under which Customs Tariff heading (CTH) are the 'Gear Motors' supplied by the applicant to be classified: heading 8483 (gear boxes and speed changers) or heading 8501 (electric motors)?
    • Whether gear motors can be considered as 'gears' and 'gearings'.
    • What is the rate of CGST/SGST applicable on gear motors: (a) 9% under Schedule III, Sl. No. 372; (b) 9% under Schedule III, Sl. No. 369A; or (c) 14% under Schedule IV, Sl. No. 135 of Notification No. 01/2017-CT(Rate) and G.O. (Ms) No. 62 dated 29.06.2017?

    Facts

    The applicant manufactures gearboxes and gear reducers. Gearboxes and electric motors are imported from a related party and assembled in India to the buyer's specifications, forming a gear motor, which is a single integrated unit combining a gearbox and an electric motor. The authority relied on the applicant's purchase order and sale invoice, which show a single supply of a geared motor rather than separate supplies of gearboxes and motors.

    Ruling

    QuestionWhat the authority ruled
    Classification of gear motors supplied by the applicantCTH 8501
    Gear motors are a single supply, and their principal function is conversion of electrical into mechanical energy. Not a mixed supply, so heading 8483 is not applied.
    Whether gear motors can be considered 'gears' and 'gearings'Not answered
    Held outside the scope of Section 97(2). The ruling text refers to 'Section 98(2)', which appears to be a typographical error for s.97(2).
    Rate of CGST/SGST applicable on gear motors9% CGST and 9% SGST
    Under Schedule III, Sl. No. 372 of Notification No. 01/2017-CT(Rate) dated 28.06.2017 and G.O. (Ms) No. 62 dated 29.06.2017. Options (b) and (c) in the question are not adopted.

    The authority held that **gear motors are classifiable under CTH 8501**, applying the Section XVI Notes 3 and 4 principal-function test, and that the applicable rate is **9% CGST and 9% SGST under Schedule III, Sl. No. 372**. It declined to answer whether gear motors are 'gears' and 'gearings', holding that the question falls outside the matters listed in Section 97(2).

    Reasoning

    The authority reasoned that Chapter 84 Note 3 and Note 4 (Section XVI) apply the principal-function test to composite machines, and that the principal function of a gear motor is conversion of electrical energy into mechanical energy. It relied on the HSN Explanatory Notes: those to heading 8483 exclude gearboxes combined with a motor, which are classified with the motor, and those to heading 8501 state that motors remain there even when equipped with gears or gearboxes. It rejected the applicant's mixed-supply characterisation because the purchase order and invoice show a single supply of an integrated, assembled unit. On the rate question, it applied the entry for electric motors and generators at Sl. No. 372 of Schedule III. The question on 'gears' and 'gearings' was not considered because it does not fall within the enumerated categories of advance-ruling questions under s.97(2).

    Provisions relied on

    • Section 97(2) of the CGST Act / TNGST Act (scope of advance rulings)
    • Section XVI, Chapter 84 and 85 Notes 3, 4 and 5 (Customs Tariff Act 1975, First Schedule)
    • Customs Tariff Heading 8483 and HSN Explanatory Notes to 8483 (gear boxes and other speed changers)
    • Customs Tariff Heading 8501 and HSN Explanatory Notes to 8501 (electric motors)
    • Notification No. 01/2017-CT(Rate) dated 28.06.2017, Schedule III, Sl. No. 372
    • G.O. (Ms) No. 62 dated 29.06.2017 (Tamil Nadu)

    For the practitioner

    This order is useful to manufacturers and importers who assemble or supply geared motors as a single integrated unit, as it treats such supplies under CTH 8501 at 9% CGST and 9% SGST. It rests on a specific fact pattern: a single purchase order and invoice for an integrated product. It does not decide whether gearboxes or gears supplied separately fall under heading 8483, and it leaves the 'gears and gearings' question unanswered, so the point remains open. Under this authority's ruling, it is not binding on other authorities or taxpayers.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn-23-aar-2019-rossi_gmipl.pdf

    Legibility of the scan, as read: medium.

    Prepared 03-11-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this ruling mean my gear motors automatically attract 9% CGST and 9% SGST?

    Not automatically. The ruling binds only the company that asked and its own tax office. It shows how the authority reasoned, which can help you judge your own position.

    What if I buy gearboxes and motors separately and assemble them myself?

    The ruling does not decide this. The authority relied on a single purchase order and invoice for one integrated unit, so separate supplies may be treated differently.

    Did the authority decide whether gears and gearings fall under heading 8483?

    No. The authority declined to answer the question about gears and gearings, because it fell outside the matters it is allowed to rule on. That point remains open.

    Can my tax officer disagree with this ruling?

    Yes, because the ruling does not bind other tax officers or taxpayers. If your facts are similar, your officer may still take a different view, so keep documents that show how your product is sold.