Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91
    Advance rulings (AAR) Maharashtra

    GST ruling on plastic car door handles and glove box locks

    Maharashtra's advance ruling for Nexture Technologies held plastic car door handles, fittings and glove box locks fall under Chapter 3926 plastics.

    Ruling
    NO.GST-ARA-130/2018-19/B-64, Mumbai, dated 01/06/2019
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. The company makes plastic door handles, door fittings and glove box locks for motor vehicles.
    2. It asked whether these count as plastic goods or as motor vehicle parts under GST.
    3. The tax officer argued they are motor vehicle parts, taxable at 28%.
    4. The Authority held all three fall under Heading 3926, which covers plastics.
    5. The order does not state the rate figure itself.

    In short

    This GST advance ruling asks whether plastic car door handles and glove box locks count as motor vehicle parts or as plastic goods. The company said plastic goods, at a lower rate. The tax officer said motor vehicle parts, at 28%.

    What has changed

    How it worked before

    Where the classification was disputed, as it was here, businesses had no settled answer. The company claimed the lower rate for plastic goods under the Central GST rate notification, while the tax officer treated such parts as motor vehicle parts at 28%.

    What has changed

    The Authority held that parts of general use, such as locks, mountings, fittings, washers and gaskets, are kept out of the motor vehicle parts heading even when made for cars. Such goods are then classed by their material, which here is plastic, so they fall under Heading 3926. In practice, a plastic part that is a part of general use is classed as plastic, not as a motor vehicle part. The order does not give the tax rate, so the rate has to be checked against the notification entry that applies to the product.

    Who this affects

    Makers of plastic door hardware, locks, brackets, housings and gaskets for cars and other vehicles, and similar plastic parts that could be used across many machines.

    An example

    A Pune firm makes plastic mounting brackets for car seats and asks whether the same classification applies to it. The ruling suggests the answer may be the same if the bracket is a mounting or fitting of general use made of plastic. Whether that holds for the firm's own product is a question for its own tax office, which is not bound by this order.

    What you should do

    This ruling binds only Nexture Technologies and its own Maharashtra tax office. It is not automatically the law for your business. You can use it to support your own position, but first check whether your part is really a part of general use, look up the rate in the notification entry for your product, and consider applying for your own advance ruling or getting advice from a tax professional.

    If you do nothing

    If you assume this ruling covers your product and your tax officer takes a different view, you may be asked to pay the difference in tax. Interest and possibly a penalty can also follow. Acting on a ruling that does not cover you can therefore cost more than checking first.

    The terms explained

    advance ruling
    A decision by a GST authority on a business's own question about how tax applies to its activity, given before the business acts. It binds only that business and its own tax office.
    parts of general use
    Items such as locks, mountings, fittings, washers and gaskets that can be used across many kinds of machines, not only one. The Authority held these are kept out of the motor vehicle parts heading even when made for cars.
    Heading 3926
    The customs tariff heading for other articles of plastics. Goods classed here are taxed as plastic goods rather than as motor vehicle parts.
    HSN Explanatory Notes
    Official notes that explain how goods are classified under the Harmonised System of product codes. Tax authorities use them to interpret the headings.

    The ruling in detail

    Authority for Advance Ruling

    M/s Nexture Technologies Private Limited

    NO.GST-ARA-130/2018-19/B-64, Mumbai, dated 01/06/2019 · Maharashtra

    Questions before the authority

    • Classification and applicable GST rate for the door-handle of a motor vehicle.
    • Classification and applicable GST rate for plastic fittings for motor vehicle doors, namely bracket, housing, bracket housing, stator and gasket.
    • Classification and applicable GST rate for glove box locking.

    Facts

    The applicant manufactures plastic door handles, plastic door fittings (bracket, housing, bracket housing, gasket and stator) and glove box locks for motor vehicles, moulded from PVC granules. It claimed these fall under Heading 3926 at the 9% central rate under entry 111 of Schedule III of Notification 1/2017-CT(Rate). The jurisdictional officer contended that they fall under Heading 8708 (parts and accessories of motor vehicles) at 28%.

    Ruling

    QuestionWhat the authority ruled
    Door-handle of motor vehicleClassifiable under Chapter 3926; taxable at the rate applicable to that heading
    The order states no rate figure. The applicant's 9% claim under Schedule III entry 111 is not expressly confirmed in the operative part.
    Plastic fittings for motor vehicle doors (bracket, housing, bracket housing, stator, gasket)Classifiable under Chapter 3926; taxable at the rate applicable to that heading
    Reasoned as parts of general use under Section XV Note 2 (mountings, fittings, washers and gaskets), so classified by constituent material (plastic).
    Glove box lockingClassifiable under Chapter 3926; taxable at the rate applicable to that heading
    Reasoned as a lock of heading 8301 and therefore a part of general use, classified by constituent material.

    The Authority held that all three items are classifiable under Chapter 3926 and are taxable at the GST rate applicable to that heading. The order does not state the rate figure itself. The items are identifiable as motor vehicle parts but are excluded from Heading 8708 because they are parts of general use made of plastic.

    Reasoning

    The Authority read the exclusion in Section XVII Note 2 together with Section XV Note 2, under which parts of general use, including locks, mountings, fittings, washers and gaskets, are excluded from the parts-and-accessories heading even when identifiable for motor vehicles. Relying on the HSN Explanatory Notes to Headings 8302, 7318 and 8301, it treated door handles, brackets, housings, gaskets, stators and glove box locks as such parts of general use. Under Section XVII Explanatory Note 2(b), such goods are then classified by their constituent material, which is plastic, leading to Heading 3926. The Authority also relied on the general rules of interpretation, including GRI 1, and on Note 1 to Chapter 39 for the meaning of 'plastics'.

    Provisions relied on

    • Section 97(2) of the CGST Act and MGST Act (scope of advance ruling questions, as cited by the applicant)
    • Section 98 of the CGST Act and MGST Act (order of the Authority)
    • Section 9 of the CGST Act (charge of central tax)
    • Notification 1/2017-Central Tax (Rate), Schedule III entry 111 (as claimed by the applicant)
    • Notification 1/2017-Central Tax (Rate), Schedule IV entry 70.45 (as cited by the jurisdictional officer)
    • Customs Tariff Act, 1975: Chapter 39, Heading 3926 and Note 1 to Chapter 39
    • Customs Tariff Act, 1975: Heading 8708 and Section XVII Notes, including Note 2
    • Customs Tariff Act, 1975: Section XV Note 2 and Headings 7318, 8301, 8302 and 8308
    • HSN Explanatory Notes to Section XVII, Section XV and Headings 8302 and 8708
    • General Rules of Interpretation, Rule 1
    • Judicial decisions cited by the applicant: CC v. Maestro Motors Ltd (2004) and CCE v. Wood Craft Products Ltd (1995)

    For the practitioner

    A practitioner dealing with plastic automotive door hardware, or similar parts of general use, can use this order to support classification under Heading 3926 on the Section XV and XVII Notes. The order does not spell out the rate in its operative part, so the rate must be checked against the notification entry it applies. It also does not decide the position for plastic parts that are not parts of general use, or for other motor vehicle components that have no such exclusion. Because it is an advance ruling of a state authority, its reach beyond the applicant is limited.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/maharashtra_aar_130_2018-19_b-64_ntpl_01.06.19.pdf

    Legibility of the scan, as read: medium.

    Prepared 04-11-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this mean I can classify my plastic car parts the same way?

    Not automatically. The ruling is based on the specific product and reasoning in this case. You need to check whether your part is a part of general use made of plastic, and whether it falls within the same reasoning.

    Is this ruling binding on my state?

    No. It is an advance ruling of the Maharashtra Authority and binds only the company that asked and its own tax office. Other tax offices, including those in other states, are not bound by it.

    What if my tax officer disagrees with this ruling?

    Your officer can take a different view, because the ruling is only binding on the applicant. In that case, the matter may have to be settled in appeal or through your own advance ruling application.

    What GST rate applies to these products?

    The order does not state the rate figure. The company claimed 9% under an entry of the Central GST rate notification, and the officer cited a different entry. You must check the notification entry that matches your product.