This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- Maini Precision Products asked the tax authority for the correct GST rate.
- Karnataka tax authority ruled pump parts fall under HSN code 8413 91 90.
- Parts of fuel injection pumps attract an 18% GST rate.
- Complete fuel injection pumps attract a higher 28% GST rate.
In short
Maini Precision Products Ltd asked the Karnataka Authority for Advance Ruling about the correct Goods and Services Tax (GST) rate for parts of fuel injection pumps for diesel engines. Complete fuel injection pumps carry a 28% GST rate under HSN 8413 30. The company wanted to know if manufacturing individual pump parts qualifies for the lower 18% GST rate under HSN code 8413 91 90.
What has changed
How it worked before
Auto-component suppliers were often uncertain whether spare parts for fuel injection pumps should carry the 28% GST rate applied to complete pumps or the standard 18% rate for machinery parts. Many suppliers charged 28% GST to avoid potential tax demands during audits.
What has changed
The authority ruled that parts of fuel injection pumps fall under HSN code 8413 91 90. Because these parts are not specifically listed under the 28% tax schedule, they fall into the general entry charging 18% GST. This means suppliers of these individual components can charge 18% GST instead of 28%.
Who this affects
Auto-component manufacturers and machine workshops in India that make or sell spare parts for diesel fuel injection pumps.
An example
A precision engineering company in Bengaluru manufactures valves and nozzle holders used inside diesel fuel injection pumps. The company is unsure whether to bill these items at 18% or 28% GST to vehicle assembly plants. Following Karnataka AAR order 19/2018, because these items are individual pump parts under HSN 8413 91 90, the suggested GST rate is 18%.
What you should do
Review the HSN codes you use for motor pump spare parts. Remember that an advance ruling binds only the business that applied for it and their local tax officer. If you want official protection for your business, you must apply for your own advance ruling.
If you do nothing
If you reduce your GST rate from 28% to 18% relying only on another company's ruling, your tax officer can reject it. The tax department can issue a demand notice for unpaid tax along with interest and penalty. You cannot legally use someone else's advance ruling to defend your business during a tax audit.
The terms explained
- HSN code
- An international standard system of numbers used to classify goods for tax calculation.
- advance ruling
- An official written decision given by tax authorities to a business about how GST laws apply to its transactions.
- residual entry
- A default tax list category that covers items not specifically named in any other rate schedule.
The ruling in detail
Authority for Advance Ruling
M/s Maini Precision Products Ltd.
Advance Ruling No. KAR ADRG 19 / 2018 dated 6th August 2018 · Karnataka
Questions before the authority
- Whether the 'Parts of Fuel Injection Pumps' are classifiable under Tariff Heading 8413 91 90?
- Whether the applicable entry in Notification 1/ 2017 – Integrated Tax (Rate), is 453 of Schedule III, for parts of fuel injection pumps, attracting a levy of 18%?
Facts
The applicant is engaged in the manufacture and supply of high-precision components and assemblies for automotive, industrial, and aerospace sectors. Specifically, the applicant manufactures 'parts of fuel injection pumps for diesel engines' rather than complete pumps or hand pumps. A ruling was sought to determine the appropriate HSN classification and GST rate applicable to these components.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of Parts of Fuel Injection Pumps for diesel engines | Tariff Heading 8413 91 90 |
| Applicable GST Notification Entry and Rate | Entry No. 453 of Schedule III, attracting 18% IGST |
The Authority held that 'Parts of Fuel Injection Pumps for diesel engines' are classifiable under **Tariff Heading 8413 91 90** of the Customs Tariff Act, 1975. Consequently, as they are not specifically listed elsewhere in Schedules I, II, IV, V, or VI, they fall under residual Entry No. 453 of Schedule III of Notification No. 01/2017-Integrated Tax (Rate), attracting **18% GST**.
Reasoning
Tariff Heading 8413 covers pumps for liquids and their parts. Sub-heading 8413 91 covers parts of pumps, with specific sub-classifications for reciprocating, centrifugal, deep well turbine, and hand pumps, but no specific sub-entry for fuel injection pump parts. Therefore, parts of fuel injection pumps for diesel engines fall under the residual code 8413 91 90 ('Other'). Furthermore, while complete fuel injection pumps for internal combustion engines fall under 8413 30 and attract 28% GST under Schedule IV Entry 117, that entry does not extend to parts. Since parts falling under 8413 91 90 are not specified in Schedules I, II, IV, V, or VI, they are covered under the residual Entry No. 453 of Schedule III of Notification No. 01/2017-Integrated Tax (Rate) at 18% GST.
Provisions relied on
- Section 97(2)(b) of CGST Act, 2017 / KGST Act, 2017
- Section 98 of CGST Act, 2017 / KGST Act, 2017 / IGST Act, 2017
- Tariff Heading 8413 91 90 of Customs Tariff Act, 1975
- Notification No. 01/2017-Integrated Tax (Rate) dated 28.06.2017 (Schedules I, II, III, IV)
- Notification No. 43/2017-Integrated Tax (Rate) dated 14.11.2017
For the practitioner
This ruling establishes that **parts of fuel injection pumps** are distinct from complete fuel injection pumps and do not attract the higher 28% rate applicable to complete pumps under Tariff Item 8413 30. Auto-component manufacturers supplying pump parts under HSN 8413 91 90 can apply the **18% GST rate** under the residual entry of Schedule III.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/krntk_19_2018_mppl.pdf
Legibility of the scan, as read: high.
Prepared 22-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
