This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The applicant asked about bike locks used on motorised bicycles, under HS 8714.
- The authority treated the question as being about cycle locks and ruled on those only.
- Cycle locks were classified under Chapter Heading 8714 of the Customs Tariff.
- The authority rejected the argument that locks belong under heading 8301.
- The order does not state the GST rate; it must be checked separately.
In short
An advance ruling is a written decision by a tax authority on one business's question before it acts. Here the question was which HS code applies to bike locks, which decides the GST rate. HS 8714 covers parts and accessories of bicycles, while locks used for general purposes sit under heading 8301.
What has changed
How it worked before
The order does not record how businesses classified these locks before this ruling. It notes that cycle locks were already treated under Chapter 8714 before GST, under an excise exemption entry, so the position was not settled in writing.
What has changed
The authority held that cycle locks are classifiable under Chapter Heading 8714. It reasoned that they are used only with bicycles, so they are not general-use articles that would fall outside the parts-and-accessories heading. The order does not state a rate, so the rate for that heading must be checked against the notified schedule.
Who this affects
Manufacturers, importers and traders of cycle locks in India. Sellers of locks for motorised bicycles or motorcycles have the same question but are not covered by this ruling.
An example
A shop in Kanpur sells cycle locks and also disc locks for motorcycles. Its accountant asks whether both can be classed under HS 8714 for GST. This ruling suggests cycle locks can be, because they are used only with bicycles. It says nothing about the motorcycle locks, so the shop needs its own answer for those.
What you should do
Treat this ruling as persuasive, not as law for your business. It binds only the company that asked and its own tax office in Uttar Pradesh. If you sell cycle locks, check the current rate schedule for HS 8714 yourself. If you sell motorised bike locks, this ruling does not answer your question, so seek your own advance ruling or professional advice.
If you do nothing
If you assume this ruling covers your product, a tax officer may still classify it differently and demand the difference in tax. Because the ruling binds only the applicant and its tax office, it will not protect you in a dispute. Interest and penalties may apply to any shortfall.
The terms explained
- advance ruling
- A written decision by a tax authority on a specific business's question about how GST applies to a particular activity or product. It binds only the business that asked and its own tax office.
- HS 8714
- A heading in the Harmonised System code list used for tax classification. It covers parts and accessories of bicycles and other cycles.
- parts of general use
- Items that can be used with many kinds of goods, such as general-purpose locks. These are excluded from the parts-and-accessories heading, so they are classified separately.
- heading 8301
- The heading under which locks for general purposes are classified. The authority held that cycle locks do not belong here.
The ruling in detail
Authority for Advance Ruling
Shri Shudhanshu Garg (listed as M/S SudhanshuGarg)
Order No. 15, dated 16.10.2018 (Authority for Advance Ruling, Uttar Pradesh) · Uttar Pradesh
Questions before the authority
- Whether 'Bike Locks' used for motorized bicycles are classified and taxable under HS 8714 (Parts and Accessories of Bicycle & other cycle).
- The authority treated the application as concerning 'cycle locks' and ruled on that product only, after the applicant clarified during the personal hearing that it sought a ruling on cycle locks.
Facts
The applicant, an unregistered person in Aligarh, sought an advance ruling on whether bike locks used for motorized bicycles fall under HS 8714. At the personal hearing on 15.10.2018 the applicant argued that cycle locks are made only for cycles, cannot be used for any other purpose, and are identified as a distinct item by the trade and end consumers. A sample of the cycle lock was produced.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of cycle locks | Classifiable under Chapter Heading 8714 of the Customs Tariff Act, 1975 The order does not state the GST rate figure; it says only that the rate applicable to Chapter Heading 8714 applies. |
| Bike locks used for motorized bicycles (as originally framed) | Not answered The authority recorded that the application was inadvertently filed on bike locks for motorized bicycles and confined its order to cycle locks. |
The authority ruled that the product 'cycle locks' is classifiable under Chapter Heading 8714 of the Customs Tariff Act, 1975. The GST rate applicable to Chapter Heading 8714 applies to that product. The ruling is confined to cycle locks, and the order does not decide the question as framed for motorized bicycle locks.
Reasoning
The authority read Note 2 to Section XVII of the Customs Tariff, which excludes 'parts of general use' from the expression 'parts and accessories', and Note 2 to Section XV, which defines general-use articles to include locks under heading 8301. It held that cycle locks are not general-use articles because they are used exclusively for bicycles, whereas heading 8301 locks serve general purposes. It relied on the Supreme Court's definition of 'accessories' in Annapurna Carbon Industries (1976) and the Allahabad High Court's commercial-sense test in Indo Italian Amusement Park (2005). It also noted EXIM data showing HS 8714 is used for cycle locks internationally, a field report from the Aligarh Deputy Commissioner supporting 8714, and the trade's sample invoices. Finally, it noted that cycle locks were exempted under Entry 293 of Notification 12/2012-Central Excise dated 17.03.2012, showing they were already treated under Chapter 8714 before GST.
Provisions relied on
- Section 96 of the CGST Act, 2017 (constitution of the Authority for Advance Ruling)
- Section 97(1) of the CGST Act, 2017 (application for advance ruling)
- Section 98 of the CGST Act, 2017 (order of the Authority)
- Customs Tariff Act, 1975: Section XVII, Note 2
- Customs Tariff Act, 1975: Section XV, Note 2 (definition of 'parts of general use')
- Heading 8301 and Heading 8714 of the Customs Tariff
- Notification 12/2012-Central Excise dated 17.03.2012, Entry No. 293
- Annapurna Carbon Industries Co. v. State of Andhra Pradesh [1976] 37 STC 378 (SC)
- M/s Indo Italian Amusement Park Ltd. v. Commissioner of Trade Tax, 2005 NTN (Vol. 28) 107 (Allahabad HC)
For the practitioner
A practitioner can cite this order to support classifying cycle locks under **Chapter Heading 8714**, with the GST rate for that heading applying, and to answer the argument that locks fall under heading 8301. It does not decide the classification of bike locks used on motorized bicycles, which was the question as originally framed. The rate is not stated in the order text, so the rate should be checked separately against the notified schedule.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/up_aar_15_16.10.2018_sg.pdf
Legibility of the scan, as read: high.
Prepared 25-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
