Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    GST rate for truck body building on customer chassis: advance ruling in Karnataka

    The Karnataka authority held that a truck body builder working on a customer's chassis provides a job-work service taxed at 18% GST, not 28%.

    Ruling
    Advance Ruling No. KAR ADRG 02 / 2020, Date: 07-01-2020
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. The company builds tippers, trailers, containers and tankers on chassis supplied by the principal.
    2. It had charged 28% GST, treating the work as a supply of goods.
    3. The authority held the work is a job-work service of bus body building, taxed at 18%.
    4. It also held the 12% GST entry the company had identified does not cover this work.
    5. The ruling binds only the company that asked and its own tax office.

    In short

    A company that builds truck bodies such as tippers, trailers, containers and tankers asked the Karnataka Authority for Advance Ruling, which gives businesses a binding answer on a tax question before they file, whether it should charge 28% or 12% GST on this work. The company was charging 28% and treating the work as a sale of goods, although its invoices described it as fabrication of body building. It asked whether it could charge 12% instead.

    What has changed

    How it worked before

    Many body builders treated their work as a sale of goods and charged 28% GST. Some looked to the 12% entry for certain goods and services. The position was not settled for body building on a customer's own chassis.

    What has changed

    The authority held that 28% applies only if the work is treated as a supply of goods under heading 8707, and it did not accept that treatment here. It held that the work is a job-work service of bus body building, which attracts 18% GST (9% CGST and 9% SGST) and falls under SAC 998881. It also held that the 12% entry the company claimed does not cover this work. In practice, a body builder who works on a chassis supplied by a customer should consider the 18% service rate instead of 28% goods rate, and should not rely on the 12% entry.

    Who this affects

    Truck, trailer, container and tanker body builders who fabricate bodies on chassis supplied by their customers, and their advisers, are the businesses that face this same question.

    An example

    A body builder in another state fabricates tipper bodies on trucks that its customers bring to its yard, and charges a fabrication fee for each job. It has been charging 28% GST as if it sold the bodies as goods. It would ask whether it can charge the lower service rate used in this Karnataka ruling. This ruling suggests the answer may be yes for work of this kind, but the other state's tax office is not bound by it.

    What you should do

    Check whether your work matches the facts here: a body built on a chassis that a customer supplies, charged as a fabrication or job-work fee. Read the full order before relying on it, because the conclusion depends on those facts. A ruling binds only the company that asked and its own tax office, so it is not automatically the law for you. Discuss with your tax adviser whether to change your rate, and whether your invoices should describe the service accurately.

    If you do nothing

    If you assume this ruling covers your work when it does not, a tax officer may treat your rate as wrong and demand the difference with interest. Charging the wrong rate on invoices can also lead to penalties. The cost of checking the facts first is far lower than the cost of a later demand.

    The terms explained

    advance ruling
    A decision by a tax authority on how a tax applies to one business's specific question, given before that business acts. It binds only that business and its own tax office.
    job work
    Work done on goods or materials that belong to someone else, such as fabricating a body on a chassis the customer supplies, for a fee.
    chassis
    The frame and wheels of a vehicle, on which a body such as a tipper or tanker is built.
    heading 8707
    The tariff classification for vehicle bodies, under which a sale of a built body is treated as a sale of goods.
    SAC
    Services Accounting Code, the number that identifies a type of service for GST purposes. SAC 998881 is the code this ruling applies to the body-building work.

    The ruling in detail

    Authority for Advance Ruling

    M/s SLN Tech-Fabs(Bengaluru) Pvt. Ltd.

    Advance Ruling No. KAR ADRG 02 / 2020, Date: 07-01-2020 · Karnataka

    Questions before the authority

    • Presently the applicant charges GST at 28% (CGST 14% + SGST 14%) under Sl.No. 169 of Schedule IV to Notification No. 1/2017-CT(R) dated 28.06.2017. Is this correct?
    • Can the applicant use SAC 998881 under Sl.No. 535 of the Annexure to Notification No. 11/2017-Central Tax (Rate) dated 28.06.2017?
    • Can the applicant start charging GST at 12% (CGST 6% + SGST 6%) under Sl.No. (i)(a)(vi)(n)(id) of Notification No. 20/2019-Central Tax (Rate) dated 30.09.2019? (Entry number partly illegible on the scan.)

    Facts

    The applicant is a private limited company in the transport solutions business, fabricating and building truck bodies under the trademark SLN DIAMOND. Its products include tippers, trailers, containers and tankers, built on chassis supplied by the principal and not on account of a body builder. The applicant currently charges 28% GST, treating the supply as goods, although its invoices describe the activity as fabrication of body building on the vehicle. It relies on CBIC Circular No. 52/26/2018-GST dated 09.08.2018, which treats bus body building on the principal's chassis as a service at 18%.

    Ruling

    QuestionWhat the authority ruled
    Whether 28% GST (CGST 14% + SGST 14%) under Sl.No. 169 of Schedule IV to Notification 1/2017-CT(R) is correctCorrect, if the activity is treated as supply of goods falling under Chapter heading 8707
    The answer is conditional. The Authority found the applicant's activity is akin to job-work bus body building, which is treated as a service.
    Whether SAC 998881 may be used under Sl.No. 535 of the Annexure to Notification 11/2017-CT(R)Yes. The fabrication of body building on tippers, trailers etc. merits classification under SAC 998881 (motor vehicle and trailer manufacturing services)
    Based on the explanatory notes to the Scheme of Classification of Services, which follow the UNCPC notes.
    Whether GST at 12% (CGST 6% + SGST 6%) may be charged under Notification 20/2019-CT(R)No. The applicant can charge GST at 18% (CGST 9% + SGST 9%) under Sl.No. (i)(ic) of Notification 11/2017-CT(R), as amended by Notification 20/2019-CT(R)
    The applicant had wrongly identified the entry as 12%. The explanation under Notification 26/2019-CT(R) applies, provided the vehicle falls under Chapter 87 of the Customs Tariff Act, 1975. The order gives the date of that notification as 22.11.2019 in one place and 21.11.2019 in the ruling.

    The Authority held that charging 28% GST is correct only if the activity is treated as a supply of goods under heading 8707. It held that the fabrication of body building on tippers, trailers etc. merits classification under SAC 998881. It held that the applicant's activity is a job-work service of bus body building attracting 18% GST (9% CGST and 9% SGST), not the 12% rate the applicant had identified.

    Reasoning

    The Authority treated the questions as turning on whether the applicant's body-building work is akin to the bus body-building job work described in Circular 52/26/2018-GST, paras 12.1, 12.2(b) and 12.3. It found the conditions met: the body is built on the principal's chassis and the applicant charges fabrication charges. It relied on the explanation inserted into Sl.No. 26 by Notification 26/2019-CT(R), which brings bus body building on any Chapter 87 vehicle chassis within the service entry. It also noted that the 12% entry claimed by the applicant does not cover this work, which is carved out under the (i)(ic) entry at 18%.

    Provisions relied on

    • Section 97 of the CGST Act, 2017 and corresponding KGST Act, 2017 (advance ruling application)
    • Section 98(4) of the CGST Act, 2017 and KGST Act, 2017 (order)
    • Rule 104 of the CGST Rules, 2017 and KGST Rules, 2017 (Form GST ARA-01)
    • Section 11(3) of the CGST Act, 2017
    • Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017, Schedule IV, Sl.No. 169
    • Notification No. 11/2017-Central Tax (Rate) dated 28.06.2017, Sl.No. 26 and Sl.No. 535 of the Annexure, entry (i)(ic)
    • Notification No. 20/2019-Central Tax (Rate) dated 30.09.2019
    • Notification No. 26/2019-Central Tax (Rate) dated 22.11.2019 (explanation to bus body building entry; ruling refers to 21.11.2019)
    • CBIC Circular No. 52/26/2018-GST dated 09.08.2018, paras 12.1, 12.2(b) and 12.3
    • Chapter 87 of the First Schedule to the Customs Tariff Act, 1975
    • Chapter heading 8707

    For the practitioner

    A practitioner advising truck, trailer, container or tanker body builders working on customer-supplied chassis can use this order to support 18% GST and SAC 998881 for that job work. It also shows that the 12% entry does not apply to this activity. The order does not decide the rate where the applicant supplies the chassis itself or where the vehicle falls outside Chapter 87. Its effect is limited to the applicant, so the reader should check the full order for the facts on which the conclusion depends.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/aar-02-dated_10-01-2020_sln_tech_fab.pdf

    Legibility of the scan, as read: medium.

    Prepared 16-11-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this ruling mean I can charge 18% GST on my truck bodies?

    Only if your work is like the company's: you build the body on a chassis that your customer supplies and charge a fabrication fee. The ruling does not decide the rate where you supply the chassis yourself or where the vehicle falls outside Chapter 87.

    Is this ruling binding on tax officers in my state?

    No. The ruling binds only the company that asked and its own tax office in Karnataka. Your state's officers are not bound by it, though they may find the reasoning useful.

    Can I use the 12% GST entry instead?

    The authority held that the 12% entry the company claimed does not cover this body-building work, so it should not be relied on for it.

    What if my tax officer disagrees with this reasoning?

    Your officer may take a different view, and you may need to argue your position or appeal. Keep records of your contracts and invoices that show the chassis belongs to the customer and that you charge a fabrication fee.