This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- Prism Fluids LLP asked the GST rate and HSN code for circulating oil lubrication systems.
- At the 9 April 2019 hearing, it promised drawings, component write-ups and sample invoices.
- It did not file those papers and missed hearings on 19 June and 24 July 2019.
- The Authority rejected the application without deciding the rate or the HSN code.
- The Commissioner's view of 28% under heading 8413 was recorded, but not adopted as a ruling.
In short
A GST advance ruling is a decision a tax authority gives before a business starts a transaction, saying how it will be taxed. Prism Fluids, a Tamil Nadu maker of machine lubrication systems, asked which GST rate and HSN code applies to its circulating oil systems. The systems are a steel tank with pumps, filters, heat exchangers and valves, built to each buyer's specification.
What has changed
How it worked before
The rate for these systems was not settled by this order, and businesses in this line had no ruling to rely on either way. The tax office's own view, recorded here, was 28% under heading 8413, but that view was not decided by the Authority.
What has changed
The Authority decided nothing on the rate or HSN code. It rejected the application because the technical file was never produced, despite repeated chances to file it. In practice, an advance ruling application can be thrown out if drawings, component lists, configuration write-ups and sample invoices are not supplied in full and on time.
Who this affects
Makers of lubrication, cooling or flushing systems for machine bearings, slideways or gearboxes, especially those built to buyer specifications, who want certainty on their GST rate.
An example
A Coimbatore firm builds bespoke lubrication units for gearboxes and asks whether GST at 28% applies to them. The Authority would likely ask for drawings and component lists for each configuration before ruling, as it did here. This order suggests the answer depends on that technical file, so the firm should prepare it before filing.
What you should do
A ruling binds only the company that asked and its own tax office, so this order is not a law that applies to you. Do not use the 28% view as your rate without advice from your tax professional. If you plan to apply for a ruling, prepare the full technical file for every configuration you sell and attend each hearing.
If you do nothing
If you assume the 28% view covers your system and it does not, your tax office may treat the tax you paid as short. You could then be asked to pay the shortfall with interest, and possibly a penalty. A ruling only protects you when you have one that covers your own product.
The terms explained
- advance ruling
- A decision a tax authority gives in advance on how GST applies to a specific transaction of one business. It binds only that business and its own tax office.
- HSN code
- A standard numbering system for goods that determines which GST rate applies to them. Each product is placed under a code.
- heading 8413
- A classification heading in the HSN system covering pumps. The tax office's view placed these systems here, but the Authority did not decide that.
- natural justice
- The principle that a party must get a fair chance to be heard before a decision is made against it. Here, extra hearing dates were given on this basis.
The ruling in detail
Authority for Advance Ruling
M/s. PRISM FLUIDS LLP (GSTIN 33AANFP5828N1ZM), Old No. 55 New No. 3, Y Block, 8th Street, Anna Nagar, Chennai 600 040
ORDER No. 30/ARA/2019 Dated 25.07.2019 · Tamil Nadu
Questions before the authority
- What is the rate of tax on circulating oil systems / lube systems (described in the order as 'Oil Lubrication Systems')?
- What is the HSN code for the said circulating oil lubrication system?
Facts
The applicant is a manufacturer of circulating oil lubrication systems used to lubricate, cool and flush bearings, slideways and gearboxes of machines. Each system comprises a mild steel tank with partitions and strainer, plus pumps, filters, heat exchangers, isolation and check valves, gauges, control valves and instrumentation, with most components bought out. Systems are designed to the buyer's requirements, integrated on a common base, tested and shipped for installation at the client's plant.
Ruling
The Authority rejected the application without ruling on the rate of tax or the HSN code. Its reason was that the technical details of the supply, for which classification and rate were sought, had not been produced despite repeated opportunities to do so. The jurisdictional Commissioner's comments, which placed the system under Chapter 8413 at 28% GST, were recorded but were not adopted as a ruling.
Reasoning
The applicant undertook at the hearing of 09.04.2019 to furnish a technical write-up, usage details, drawings and component descriptions for each configuration a buyer may choose, along with purchase orders and invoices. It did not furnish these, and it failed to appear on the adjourned dates (19.06.2019 and 24.07.2019) despite extensions granted on natural justice grounds. The Authority held that these details were necessary to determine classification and the applicable rate, and so it declined to rule. The order cites Section 98 CGST/TNGST Act as the basis of the proceedings and Rule 104 CGST Rules as the basis for the application fee. The Commissioner's view that the goods fall under heading 8413 (pumps for internal combustion piston engines, subheading 841330) at 28% is recorded in the order, but it was a comment and was not the Authority's decision.
Provisions relied on
- Section 98 of the CGST Act 2017 (and corresponding TNGST Act provision): advance ruling proceedings
- Rule 104(1) of the CGST Rules 2017 and SGST Rules 2017: application fee
- Principles of natural justice (applied in granting further hearings; no statutory section cited)
- Chapter 8413 / subheading 841330 (cited in the Commissioner's comments only, not adopted in the ruling)
For the practitioner
This order does not settle the GST rate or HSN for circulating oil lube systems, because the Authority declined to decide. It is useful mainly as a warning that an advance ruling application will be rejected if the technical file (drawings, component lists, configuration-wise write-ups, sample invoices) is not produced in full and on time. Practitioners should check the Commissioner's view of heading 8413 at 28%, which the order records but does not endorse, and should not treat it as a precedent for either rate.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn_aar_30_2019_prism_fluids_llp.pdf
Legibility of the scan, as read: high.
Prepared 05-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
