Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    GST advance ruling on U-bolts, spring pins and bushes classification

    Haryana's authority ruled U-bolts and spring pins attract 18% GST, but a bush claimed as a plain bearing attracts 28%.

    Ruling
    ADVANCE RULING NO.HAR/HAAR/R/2018-19/48 (In Application No.: 48/2018-19, dated 08.01.2019); order dated 29.03.2019, Panchkula
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. The company asked the GST rate and tariff heading for four products: U-bolt, Centre Bolt, Spring Pin and Bush.
    2. U-bolts and Centre Bolts fall under tariff heading 7318 at 18%.
    3. Spring pins fall under tariff heading 7320 90 20 at 18%.
    4. Bushes fall under heading 8708 at 28%, not the plain bearing heading 8483 the company wanted.

    In short

    A GST advance ruling is a written answer from a state tax authority to one business's question before it acts. Here, the Haryana Authority for Advance Ruling was asked which tariff heading and GST rate apply to four products made by M/s. Jamana Auto Industries Ltd. The main question was whether a bush should be taxed as a plain bearing or as a motor vehicle part.

    What has changed

    How it worked before

    The order does not record how these products were being taxed before, so there is no clear baseline to compare against. The company itself argued that the bush belonged under heading 8483, which covers plain shaft bearings. The question was open enough that the company asked the authority to decide it.

    What has changed

    The authority applied the General Rules of Interpretation, which say that a product is classified by its tariff heading and the notes to the relevant Section and Chapter. It placed U-bolts and Centre Bolts under heading 7318, because the HSN explanatory notes list U-bolts there. It placed the bush under heading 8708 at 28%, because the explanatory notes list plain shaft bearings as parts of motor vehicles. In practice, a bush that looks like a bearing may still be taxed at 28% if it is meant for vehicles.

    Who this affects

    Makers of nuts, bolts, U-bolts and Centre Bolts, spring pins, and bushes or shaft bearings, especially those who sell to vehicle or auto component makers.

    An example

    A small unit in Haryana makes U-bolts for trucks and asks whether they attract 18% GST. The ruling suggests yes, since the HSN notes name U-bolts under heading 7318. If the same unit also makes a bush sold as a plain bearing for engines, the ruling suggests that bush may fall under heading 8708 at 28%. The unit still needs to confirm this against its own product details.

    What you should do

    This ruling binds only M/s. Jamana Auto Industries Ltd. and its own tax office. It does not automatically become the rule for your product. Compare your product's design and end use with the ruling's description before relying on it. Since the summary notes that the reasoning on the bush is limited, read the full order before applying its bush finding. If your product is similar but not identical, get advice or apply for your own advance ruling.

    If you do nothing

    If you assume this ruling covers your product and it does not, a tax officer may treat your rate as wrong and ask you to pay the shortfall. The ruling gives you no protection in that case, because it was issued only to the applicant. Checking your own product's heading before filing is far cheaper than correcting it later.

    The terms explained

    advance ruling
    A written decision by a state tax authority on a business's own question about how GST applies, given before the business acts. It binds only the business that asked and its own tax office.
    tariff heading
    The numbered category in the customs tariff that a product falls under, which decides its GST rate. Heading 7318 covers certain steel fasteners such as bolts and U-bolts.
    parts of general use
    Items that can be used with many different machines and are therefore classified in their own heading, not with the machine. The ruling relied on this idea to place fasteners under heading 7318.
    plain shaft bearing
    A simple bearing that supports a rotating shaft without rolling parts. The company argued its bush was one of these, but the authority placed it under heading 8708 for motor vehicles.

    The ruling in detail

    Authority for Advance Ruling

    M/s Jamna Auto Industries Ltd., E-46, Jai Spring Road, Industrial Area, Yamuna Nagar, Haryana (GSTIN 06AAACJ3929N1ZA)

    ADVANCE RULING NO.HAR/HAAR/R/2018-19/48 (In Application No.: 48/2018-19, dated 08.01.2019); order dated 29.03.2019, Panchkula · Haryana

    Questions before the authority

    • What is the appropriate classification and applicable rate of the Products, namely U-Bolt, Screws Bolts and Nuts, Spring Pins and Bushes, manufactured and supplied by the Applicant?

    Facts

    The applicant is a Haryana registered taxpayer that manufactures and supplies nuts, bolts, springs and bushes. The question concerns four products: U-bolt, Centre Bolt, Spring Pin and Bush. The application was made under clause (a) of Section 97(2) of the CGST/HGST Act, 2017, which covers classification of goods or services.

    Ruling

    QuestionWhat the authority ruled
    U-Bolt and Centre BoltTariff Heading 7318 15 00, taxable at 18%
    The HSN explanatory notes to heading 7318 expressly include U-bolts, and the Centre Bolt is threaded and made to engage a nut. Both are of steel and are not excluded by the Section XVII notes.
    Spring PinTariff Heading 7320 90 20, taxable at 18%
    Spring pins are specifically named in tariff item 73209020, and their spring action places them under the 'Other' sub-heading of heading 7320.
    BushTariff Heading 87089900, taxable at 28%
    The applicant's claim for heading 8483 as a plain shaft bearing was not accepted. The authority relied on the heading 8708 explanatory note, which includes plain shaft bearings among parts and accessories of motor vehicles.

    The authority ruled that **U-Bolt and Centre Bolt fall under Tariff Heading 7318 15 00 at 18%**. It ruled that **Spring Pin falls under Tariff Heading 7320 90 20 at 18%**. It ruled that **Bush is covered under Tariff Heading 87089900 at 28%**, rejecting the applicant's plea for classification as a plain shaft bearing under heading 8483.

    Reasoning

    The authority applied the General Rules of Interpretation, under which classification follows the headings and the relevant Section and Chapter notes. It relied on Section XV Note 2, which defines parts of general use to include articles of heading 7318, and on Section XVII Note 2, which excludes such parts and certain machinery articles from the expression parts. It drew on the HSN explanatory notes to heading 7318, which include U-bolts, to classify the U-bolt and Centre Bolt there. For the bush, it relied on the HSN explanatory note and the WCO explanatory notes to heading 8708 (para F), which list plain shaft bearings as parts and accessories of motor vehicles, and it held that the bush falls under heading 8708 rather than 8483. The order gives limited reasoning on the bush beyond these notes, so the full order should be checked on this point.

    Provisions relied on

    • Customs Tariff Act, 1975: Section XV Note 2 (parts of general use)
    • Customs Tariff Act, 1975: Section XVII Note 2(b) and 2(e)
    • General Rules of Interpretation, Rule 1
    • Tariff headings 7318, 7320 (including 73209020), 8483, 8708 and 87089900
    • HSN explanatory notes to CTH 7318 and CTH 8708
    • WCO explanatory notes, Section XVII, 8708-1, para (F)
    • Section 97(2)(a), CGST/HGST Act, 2017 (as shown in the application particulars)

    For the practitioner

    This ruling is useful for Haryana fastener and bush manufacturers because it settles that U-bolts and threaded Centre Bolts are steel fasteners under heading 7318 at 18%, and that spring pins are classified under 7320 at 18%. It also shows that a bush claimed as a plain bearing under 8483 may be pulled into heading 8708 at 28% through the motor vehicle parts notes. The order does not decide the classification of other fasteners or bushes of different design or end use, and its effect is confined to the applicant and the products as described.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/har_aar_48_2018-19_29.03.2019_jail.pdf

    Legibility of the scan, as read: high.

    Prepared 01-11-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this mean my U-bolts also attract 18% GST?

    Possibly, if your U-bolts match the ruling's product and end use. The ruling itself applies only to the company that asked, so you should check your product against its description. Your tax officer is not bound by it for your case.

    Is this ruling binding across Haryana or all of India?

    No. The ruling binds only M/s. Jamana Auto Industries Ltd. and its own tax office. Other businesses and officers may read it for guidance, but it is not a general rule.

    Why was the bush taxed at 28% if it is a bearing?

    The authority relied on the explanatory notes, which list plain shaft bearings as parts and accessories of motor vehicles. Because of that, the bush was placed under heading 8708 at 28% rather than heading 8483. The summary notes that the reasoning here is limited, so the full order should be read.

    What if my tax officer disagrees with this ruling?

    You can point to the ruling and ask the officer to explain the difference in your case. You can also apply for your own advance ruling if the question is genuinely unclear. Get advice before taking a position that differs from the department.