This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The company made filter elements and an air filter assembly for diesel locomotives supplied to Indian Railways.
- It asked whether they belong under tariff heading 8607 under GST.
- The authority said yes: they are parts of railway locomotives under heading 8607.
- It held the rate is 5%, split as 2.5% central GST and 2.5% state GST.
- The ruling binds only this company and its own tax office.
In short
A company that makes parts for diesel locomotives asked the Uttar Pradesh Authority for Advance Ruling whether its filters fall under a particular GST tax heading and what rate applies. A GST advance ruling is the tax department's written answer to one business's question before it acts, and it shows how the department reads the rules. Here the question was whether the goods count as parts of railway locomotives.
What has changed
How it worked before
The company had cleared these same goods under heading 8607 before GST, using the pre-GST excise return. The ruling does not say how other suppliers of railway parts were treating their goods under GST.
What has changed
The authority agreed with the company that its filter elements and air filter assembly are parts of railway locomotives under heading 8607, and that the rate is 5%. It relied on three points: the goods were made to Railway specifications under Railway-approved quality plans, they were used mainly in locomotives, and the company had used the same heading before GST. In practice, a supplier making similar parts for locomotives in the same way can point to this reasoning when talking to its tax office.
Who this affects
Makers of railway locomotive or rolling stock parts that are built to Railway specifications and used mainly in locomotives, such as RDSO-approved component suppliers making filters or similar items for Indian Railways.
An example
A firm in Kanpur makes the same kind of air filter, to Railway drawings, and sells it only to locomotive builders. Its accountant asks whether the ruling lets it use heading 8607 at 5%. The ruling suggests yes, because the goods are made to Railway specifications and used mainly in locomotives, though the firm should still confirm with its tax office. If the same filter were also sold for use in road trucks, the principal-use point would become harder to meet and the ruling would not settle the question.
What you should do
Read the full order before relying on it, especially its reasoning on the principal-use rule. Remember that an advance ruling binds only the company that asked and its own tax office in Uttar Pradesh, so it is not automatically law for your business. If your parts are built to different specifications, or are used with road vehicles, generators or other equipment as well as locomotives, get advice on your own facts before you assume the same heading and rate apply.
If you do nothing
If you assume this ruling covers your goods when the facts differ, a tax officer may classify them under a different heading and charge a different rate. The difference in tax, plus interest and possible penalty, can be large compared with the cost of checking first. A ruling from another company's case does not protect you if your own facts do not match.
The terms explained
- Advance ruling
- A written decision by a tax authority on one business's question about how GST applies to its planned or current activity. It binds only that business and its own tax office.
- Tariff heading 8607
- A classification code in India's customs tariff that covers parts of railway and tramway locomotives and rolling stock. Goods under this code are taxed at the rate set for it in the GST notification.
- Principal use
- The main purpose for which a part is used. Under the tariff rules, a part falls under a chapter only if it is suitable mainly for the machines in that chapter.
- ER-1 return
- The monthly excise return that manufacturers filed before GST, showing the duty they paid and the tariff heading they used.
The ruling in detail
Authority for Advance Ruling
M/s G S Products, F-1 (A), 1st & 2nd Floor, Talkatora Industrial Estate, Lucknow, Uttar Pradesh - 226011 (GSTIN 09AAIFG1234C1ZU)
Order No. 31, dated 03.06.2019 (order number and date are handwritten on the copy; the date reads 03|06|19) · Uttar Pradesh
Questions before the authority
- Whether the applicant is correct in classifying its Filter Elements and Air Filter Assembly, supplied as parts for Diesel Electric Locomotives for Indian Railways, under Tariff Heading 8607 under the GST regime.
- What rate of tax is applicable under the GST Tariff/Act on these items.
Facts
The applicant is an RDSO-approved manufacturer of railway locomotive parts, made to Railway proprietary designs and specifications under an approved Quality Assurance Plan. It supplies Low Mean Pore Size Primary and Secondary Filter Elements (DLW part numbers for ALCO locomotives) and an Air Filter Assembly for the Main Reservoir of the air brake system (part 11664253 for WDG-3A and WDM-3D locomotives) to Diesel Locomotive Works, Varanasi, under HSN 8607. Before GST, the same goods were cleared under the same heading.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of Filter Elements and Air Filter Assembly (parts for diesel electric locomotives) | Yes. Heading 8607 is correct. Items are manufactured to RDSO specifications and designs and are principally used in railway locomotives, per the approved Quality Assurance Plans. |
| Applicable GST rate for these items | 5% (2.5% SGST + 2.5% CGST) Rate follows from heading 8607 under Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017. |
**The authority ruled that the Filter Elements and Air Filter Assembly are correctly classified under Tariff Heading 8607 as parts of railway locomotives.** It held that the applicable GST rate is **5% (2.5% SGST and 2.5% CGST)**, as prescribed for heading 8607 under Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017.
Reasoning
The authority read the explanations (iii) and (iv) to Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017, which import the First Schedule to the Customs Tariff Act, 1975 and its interpretative rules for the purposes of the notification. Heading 8607 covers parts of railway or tramway locomotives or rolling stock. Note 3 to Section XVII of the Customs Tariff Act, 1975 limits references to parts in Chapters 86 to 88 to parts suitable for use solely or principally with the articles of those chapters. The authority found that the Railways had approved the Quality Assurance Plans and that the goods were principally used in railway locomotives. It also noted that the applicant had classified the goods under heading 8607 in its pre-GST ER-1 return.
Provisions relied on
- Notification No. 1/2017-Central Tax (Rate) dated 28.06.2017, explanations (iii) and (iv)
- First Schedule to the Customs Tariff Act, 1975, Heading 8607
- Note 3 to Section XVII of the Customs Tariff Act, 1975
- Central Goods and Services Tax Act, 2017 (referred to in the rate ruling)
For the practitioner
A practitioner advising RDSO-approved railway component manufacturers can use this ruling to support heading 8607 and the 5% rate for filter elements and air filter assemblies made to Railway specifications and used principally in locomotives. The order relies on the Railway approval of the Quality Assurance Plans and on principal use, so the same reasoning may not extend to parts used with other equipment. The ruling does not address other railway components, input tax credit, or the position of other suppliers, and as an advance ruling it is confined to the applicant and the facts stated. The full order should be read for the reasoning on Note 3 and the pre-GST ER-1 point.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/up_aar_31_03.06.2019_gsp.pdf
Legibility of the scan, as read: medium: the printed text is clear, but the order number and date are handwritten and the scan contains some marks and overlays..
Prepared 04-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
