This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- M/s. El-Chico Clutch Pvt. Ltd. asked which GST heading and rate apply to three automotive parts.
- The parts were Starter Ring Gear Flywheel Assembly, Starter Ring Gear and Universal Joint Cross.
- Starter Ring Gear and U.J. Cross fall under heading 8708 at 28% GST.
- The Starter Ring Gear Flywheel Assembly falls under heading 8483 at 18% GST.
- The ruling splits the three products between the two headings rather than classifying them together.
In short
In advance ruling HAR/HAAR/2019-20/12, dated 18 October 2019, the Haryana Authority for Advance Ruling (AAR) decided how GST applies to three parts made by a clutch manufacturer. The company said the parts are used in tractors and four-wheelers, and it argued they fall under HSN 8708 at 28%. The problem was that flywheels, gears and universal joints also appear in heading 8483, which carries 18% GST after Notification No. 24/2018-Central Tax (Rate). The company wanted to know which heading and rate apply.
What has changed
How it worked before
The position was unsettled. Motor vehicle parts such as gears, flywheels and universal joints can be read as belonging to either heading 8708 or heading 8483, and the two headings carry different rates. Businesses making similar parts had no clear guidance on which rate to charge.
What has changed
The Authority split the three products. Starter Ring Gear and U.J. Cross go under heading 8708 (tariff item 8708 99 00) at 28%. The Starter Ring Gear Flywheel Assembly goes under heading 8483 at 18%. The Authority relied on the Customs Tariff rules, the Section and Chapter Notes, and WCO explanatory notes, which say heading 8708 covers gears and universal joints but not flywheels. In practice, a manufacturer should not charge one rate across all such parts. Each product needs its own classification.
Who this affects
Manufacturers and suppliers of driveline and starter parts for tractors and cars, such as clutch makers and makers of gears, flywheels or universal joints, who have been unsure whether 28% or 18% GST applies to their products.
An example
A small firm in Pune makes flywheel assemblies and universal joints for car makers. It asks whether it should charge 18% or 28% GST on both. Under this ruling, the flywheel assembly points to heading 8483 at 18%, while the universal joint points to heading 8708 at 28%. The firm should not apply one rate to both items without checking each product against the order.
What you should do
Check your own products against the product descriptions in this ruling, and do not assume the rate split applies to you automatically. This ruling binds only M/s. El-Chico Clutch Pvt. Ltd. and its own tax office. Other tax officers are not bound by it, though they may take the reasoning into account. If your product is similar, you can ask the Authority for your own advance ruling, or have your tax adviser confirm the classification before you invoice. Read the full order to see the exact descriptions the Authority relied on.
If you do nothing
If you assume this ruling covers your product and charge the wrong rate, a tax officer may demand the unpaid GST, with interest, and may impose a penalty. Charging too little GST leaves a shortfall you must pay later. Charging too much may not be recoverable in the way you expect. Checking classification before you invoice is cheaper than correcting it after an audit.
The terms explained
- advance ruling
- A written decision by a tax authority on how tax applies to one business's specific question. It binds only the business that asked and its own tax office.
- HSN heading
- A code number from the Harmonised System that classifies goods. Each heading carries a GST rate, so the heading chosen decides the rate.
- tariff item
- A more detailed code under a heading, used to classify goods precisely, such as 8708 99 00.
- Explanatory Notes
- International guidance notes that explain what each classification heading covers. Tax authorities use them to settle disputes about classification.
The ruling in detail
Authority for Advance Ruling
M/s El-Chico Clutch Pvt. Ltd., Plot No. 252, Sector-24, Faridabad, Haryana (GSTIN 06AABCE4079P1Z7 as printed)
Advance Ruling No. HAR/HAAR/R/2019-20/12 (In Application No. 12/2019-20, dated 01.08.2019), signed 16.10.2019 at Panchkula per the scan (the OCR text reads 18.10.2019; the listing gives 18.10.2019). Memo No. 1052 dated 28.08.2020. · Haryana
Questions before the authority
- Whether the parts Starter Ring Gear Flywheel Assembly, Starter Ring Gear and Universal Joint Cross (U.J. Cross), supplied for use in motor vehicles, are classifiable under HSN 8708 or HSN 8483.
- What is the applicable rate of GST, 28% or 18%, on the parts Starter Ring Gear Flywheel Assembly, Starter Ring Gear and Universal Joint Cross (U.J. Cross) used in motor vehicles.
Facts
The applicant manufactures and supplies automotive parts, including Starter Ring Gear Flywheel Assembly, Starter Ring Gear and Universal Joint Cross (U.J. Cross), said to be used in tractors and four-wheelers. The applicant contended that the items fall under HSN 8708 at 28%, while the dispute arose because flywheels, gears and universal joints also appear in heading 8483, which attracted 18% after Notification No. 24/2018-Central Tax (Rate). The applicant sought a ruling on which heading and rate apply.
Ruling
| Question | What the authority ruled |
|---|---|
| Q1: Classification of Starter Ring Gear and U.J. Cross (for use in motor vehicles) | HSN 8708 (tariff item 8708 99 00, other) Parts of motor vehicles under heading 8708. The Authority relied on the WCO Explanatory Notes to 87.08, which include universal joints and gears within 8708. |
| Q1: Classification of Starter Ring Gear Flywheel Assembly | HSN 8483 The WCO Explanatory Notes exclude crank shafts, cam shafts and flywheels of heading 84.83 from 87.08, so this assembly is taken out of 8708. |
| Q2: Rate for Starter Ring Gear and U.J. Cross | 28% (CGST 14% and HGST 14%) Applied as Schedule IV rate under Notification No. 1/2017-Central Tax (Rate), as amended. |
| Q2: Rate for Starter Ring Gear Flywheel Assembly | 18% (CGST 9% and HGST 9%) Applied as heading 8483 rate under Notification No. 1/2017-Central Tax (Rate), as amended by Notification No. 24/2018-Central Tax (Rate). |
**Starter Ring Gear and U.J. Cross fall under heading 8708 (tariff item 8708 99 00) and attract 28% GST.** The **Starter Ring Gear Flywheel Assembly falls under heading 8483 and attracts 18% GST.** The ruling splits the three products between the two headings rather than classifying all of them together.
Reasoning
The Authority compared headings 8708 and 8483 and found that both cover transmission-related goods, so the goods met both descriptions on a bare reading. It applied Explanation IV to Notification No. 1/2017-Central Tax (Rate), which directs that the Customs Tariff Act First Schedule rules and Section and Chapter Notes govern classification disputes. It then applied the Section XVII explanatory note conditions for vehicle parts, including the requirement that the parts not be more specifically included elsewhere. Relying on the WCO Explanatory Notes to heading 87.08, it held that the heading includes gears and universal joints but excludes flywheels, crank shafts and cam shafts of heading 84.83, which led to the split outcome.
Provisions relied on
- Section 97(2)(a) of the CGST/HGST Act, 2017 (classification of goods)
- Notification No. 1/2017-Central Tax (Rate), dated 28.06.2017, Schedules III and IV, and its Explanation IV
- Notification No. 24/2018-Central Tax (Rate), dated 31.12.2018 (reduced the rate for heading 8483 items from 28% to 18%)
- First Schedule to the Customs Tariff Act, 1975 (General Rules of Interpretation, Section and Chapter Notes)
- HSN Explanatory Notes to Section XVII (conditions for parts and accessories of vehicles, including Note 2 to Section XVII)
- WCO Explanatory Notes, Volume 5, Explanation to heading 87.08, item (F)
For the practitioner
This ruling is useful for manufacturers of driveline and starter parts who face the 8708 versus 8483 rate split. It gives a reasoned answer that gears and universal joints go to 8708 at 28%, while flywheel-based assemblies go to 8483 at 18%. It does not decide classification of other components, and the scan does not show whether the ruling extends beyond the applicant. Practitioners should check the full order for the detailed product descriptions relied on.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/har_aar_12_2019-20_18.10.2019_eccpl.pdf
Legibility of the scan, as read: medium.
Prepared 13-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
