Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91
    Advance rulings (AAR) Maharashtra

    GST On Customer Provided Free Tools For Goods Manufacturing

    Free customer tools do not increase the GST taxable value of finished goods if the contract makes the customer responsible for supplying them.

    Ruling
    NO.GST-ARA- 19/2018-19/B- 80 dated 31/07/2018
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. Lear Automotive asked if free customer tools add to GST taxable value.
    2. The Maharashtra AAR ruled free customer tools do not attract GST addition.
    3. Section 15(2)(b) applies only when the supplier was contractually obligated to pay.
    4. CBIC Circular 47/21/2018-GST confirms customer-owned tools are excluded from valuation.

    In short

    Auto component manufacturers often use specialized tools, dies, or moulds provided free of cost by their buyers, such as car manufacturers. In Order NO.GST-ARA- 19/2018-19/B- 80 Mumbai, Lear Automotive India Private Limited asked the Authority for Advance Ruling (AAR) whether the value of these free tools must be added to the price of finished auto parts to calculate Goods and Services Tax (GST).

    What has changed

    How it worked before

    Tax officers frequently argued that the value of customer-supplied tools should be added to the taxable invoice value of finished components, leading to higher GST payments and uncertainty for manufacturers.

    What has changed

    The Maharashtra Authority for Advance Ruling decided that the amortized value of free-of-cost tools supplied by a customer does not need to be added to the GST value of the finished components. Because the contract explicitly required the customer to provide and own the tools, the manufacturer was not legally obligated to pay for them. Under Section 15(2)(b) of the Central Goods and Services Tax (CGST) Act, 2017, an addition to taxable value happens only if the supplier was supposed to pay for the item but the buyer paid instead.

    Who this affects

    Component manufacturers, engineering firms, and subcontractors who produce goods using tools, dies, or moulds supplied free of cost by their customers.

    An example

    An auto parts supplier in Pune contracts with a tractor maker to produce custom metal brackets. The tractor maker provides a specialized steel die worth ten lakh rupees free of cost, with the contract stating the die remains the tractor maker's property. Based on this ruling and CBIC Circular No. 47/21/2018-GST, the supplier does not need to add the die's amortized cost to the GST invoice for the brackets. However, if the contract had required the supplier to furnish the die at their own cost, any free tool given by the tractor maker would increase the taxable value.

    What you should do

    Review your purchase orders and supply agreements to ensure they explicitly state that the customer owns the tools and is responsible for providing them. Keep in mind that an advance ruling binds only the company that requested it and its specific tax officers. Do not treat this ruling as automatic law for your business; consult a tax professional to verify your contracts.

    If you do nothing

    If you assume this ruling protects your business without checking your contractual terms, a GST officer may audit your transactions and demand extra tax. If your agreement says you were supposed to arrange the tools yourself, the tax office can add their value to your invoice totals. This can lead to tax shortfalls, interest charges, and heavy penalties.

    The terms explained

    transaction value
    The price actually paid or payable for goods or services when sold, which forms the base amount on which GST is calculated.
    amortized value
    The cost of a long-term asset, like a mould or tool, spread out across the total number of parts produced using that asset.
    free of cost
    Items or services supplied by one party to another without any payment or financial charge required.

    The ruling in detail

    Authority for Advance Ruling

    Lear Automotive India Private Limited

    NO.GST-ARA- 19/2018-19/B- 80 dated 31/07/2018 · Maharashtra

    Questions before the authority

    • Whether amortized value of the tool received on FOC basis from the customer is required to be included in the value of finished goods manufactured and supplied by the applicant to the customer?

    Facts

    Lear Automotive India Private Limited manufactures automotive components such as seats for original equipment manufacturers (OEMs) including Mahindra & Mahindra and General Motors. In the manufacturing process, tools, moulds, and dies are provided by the customers on a Free of Cost (FOC) basis, or procured by the applicant and paid for by the customer, with tool ownership remaining strictly with the customer. The applicant sought an advance ruling on whether the amortized cost of these customer-owned tools received on an FOC basis must be added to the transaction value of the finished components supplied to the customer.

    Ruling

    QuestionWhat the authority ruled
    Inclusion of amortized value of FOC tools in the value of finished goodsAnswered in the negative
    Applies where the contractual obligation to supply tools lies with the customer/OEM.

    The Authority for Advance Ruling held that the amortized value of tools received on an FOC basis from the customer is **not required to be included** in the value of finished goods supplied by the applicant. Because the contractual obligation to provide the tools rested with the customer and not the applicant, Section 15(2)(b) of the CGST Act is not attracted.

    Reasoning

    The decision turns on Section 15(2)(b) of the CGST Act, 2017, which provides that any amount that the supplier is liable to pay in relation to a supply, but which has been incurred by the recipient, shall be included in the transaction value. The AAR examined the tooling agreements and purchase orders, confirming that tool ownership remained with the OEM and the contractual duty to bear tool costs rested on the customer rather than the supplier. Applying paras 1.1 and 1.2 of CBIC Circular No. 47/21/2018-GST dated 08.06.2018, the AAR held that since the applicant was not contractually liable to incur the cost of the tools, the amortized value of FOC tools cannot be added to the taxable supply value.

    Provisions relied on

    • Section 15 of the CGST Act, 2017
    • Section 15(2)(b) of the CGST Act, 2017
    • Circular No. 47/21/2018-GST dated 08.06.2018

    For the practitioner

    This ruling establishes that **FOC tool supplies by OEMs** do not increase the taxable transaction value of components provided the contract clearly places the obligation to supply tools on the customer. Tax practitioners can use this decision along with Circular No. 47/21/2018-GST to defend component manufacturers against valuation additions, provided original contracts and POs explicitly retain tool ownership and supply obligations with the OEM. It does not protect arrangements where the supplier was contractually obligated to furnish tools at its own expense.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/maha-gst-ara-19-b-80_dt._31.07.18_laipl.pdf

    Legibility of the scan, as read: high.

    Prepared 21-10-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this advance ruling apply automatically to my manufacturing company?

    No. An advance ruling binds only the applicant, Lear Automotive India Private Limited, and their specific tax office. You can use it as a reference for how the department views the rule, but your own tax treatment depends on your specific contracts.

    What if my contract says I must provide the tools, but the customer gave them to me for free?

    If your contract makes you responsible for providing the tools, the value of customer-supplied tools must be added to your taxable price under GST. This ruling only helps when the contract explicitly makes the customer responsible for supplying the tools.

    Is there an official circular supporting this view?

    Yes, CBIC Circular No. 47/21/2018-GST dated 08.06.2018 clarifies that free tools supplied by a buyer do not increase taxable value if the buyer was contractually obligated to supply them.

    What should I do if my tax officer disagrees during an audit?

    Show your written agreement, purchase orders, and CBIC Circular No. 47/21/2018-GST to demonstrate that you had no obligation to buy the tools. If the officer still disagrees, you may need legal assistance to reply to the demand notice or apply for your own advance ruling.