This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The applicant made vulcanized rubber rings, gaskets, seals, washers and grommets for sprinkler and drip irrigation equipment.
- The parts were sold separately to manufacturers, traders and consumers, and used only in irrigation equipment.
- The Authority ruled they fall under heading 4016 and attract 18% GST (CGST 9% plus SGST 9%).
- The 12% rate in Entry 195B covers complete sprinkler or drip systems, not separately supplied rubber parts.
- The jurisdictional officer had taken the 12% view, and the Authority did not accept it.
In short
A company that makes rubber parts for sprinkler and drip irrigation asked whether GST on those parts is 18% or 12%. The 12% rate applies to irrigation equipment, and the company argued its parts belonged in that group. The Authority for Advance Ruling (AAR) in Rajasthan said the parts are rubber articles, so 18% applies when they are sold on their own.
What has changed
How it worked before
The position was unsettled. The company's own tax officer had agreed that these parts were components of irrigation systems and should be taxed at 12%. Many sellers of irrigation parts likely followed a similar view, since the 12% rate for sprinklers and drip systems was well known.
What has changed
The Authority held that vulcanized rubber articles are classified under heading 4016 and are taxed at 18% GST. It also held that Entry 195B of Notification 01/2017 covers complete sprinkler and drip systems including laterals, so rubber parts sold separately do not qualify for 12%, even if they are used only in those systems. In practice, a seller of such parts on their own should expect 18% rather than 12%.
Who this affects
Makers and sellers of standalone rubber parts for sprinkler or drip irrigation, such as gaskets, seals, washers and grommets, and traders who resell them. It matters most to those who currently charge 12% on these parts without a system sale.
An example
A small firm in Gujarat makes rubber washers and grommets and sells them to irrigation equipment assemblers, not as part of a finished system. It asks whether it can charge 12% because the washers are used only in drip systems. This ruling suggests the answer is 18%, because the parts are supplied separately and Entry 195B covers complete systems. The firm should still confirm with its own tax officer, since this ruling binds only the Rajasthan applicant.
What you should do
Do not assume this ruling applies to you automatically. An advance ruling binds only the applicant and its own tax office, so other businesses should check the position with their tax advisor or tax officer. If you sell these parts separately, review the rate you charge and discuss it with your officer before changing your invoices. Check whether parts you sell as part of a complete system are treated differently, since the ruling does not decide that question.
If you do nothing
If you charge 12% on separately sold rubber parts, your tax officer may treat the difference as tax short paid, along with interest and possibly a penalty. Your customers could also face questions about input tax credit if the rate on their purchase invoices is wrong. Relying on this ruling without checking your own facts could therefore cost you more than the tax difference itself.
The terms explained
- advance ruling
- A written decision by a tax authority on how GST applies to one business's specific question, binding only on that business and its tax office.
- heading 4016
- A classification code in the international product list (HSN) used for articles made of rubber, such as seals and gaskets, which sets the GST rate for them.
- vulcanized rubber
- Rubber that has been chemically treated with heat to make it stronger and more elastic, the material used for these seals and gaskets.
- Entry 195B
- A line in a GST rate notification that sets 12% for complete sprinkler and drip irrigation systems, including laterals.
The ruling in detail
Authority for Advance Ruling
M/s Laxmi Rubber Industries, H-84, Road No. 5A, RIICO Bindayaka, Jaipur, Rajasthan 302012 (GSTIN 08AACFL1715B1ZX)
Advance Ruling No. RAJ/AAR/2019-20/02, Date of Ruling 16.04.2019 · Rajasthan
Questions before the authority
- Considering Note Nos. 1, 2 and 3 of Section XVI and Note No. 2 of Chapter 84, and applying the rules of interpretation of HS codes, are vulcanized rubber items (Rubber Ring/Gasket/Seal, Rubber Foot Batten Washer and Rubber Grommets) falling under heading 4016 taxable as specific rubber items at 18% GST, or as components of sprinkler/drip irrigation systems at 12% GST under heading 84249000?
Facts
The applicant manufactures and trades in rubber parts for sprinkler and drip irrigation systems used in agriculture, namely rubber rings, gaskets and seals, foot batten washers and grommets made of vulcanized rubber. The applicant states these parts fit only sprinkler/drip irrigation equipment and have no other use, and sells them to sprinkler manufacturers, parts sellers, traders and consumers. The jurisdictional officer agreed the items are components of sprinkler/drip irrigation systems and should be taxed at 12%.
Ruling
| Question | What the authority ruled |
|---|---|
| Vulcanized rubber rings/gaskets/seals, foot batten washers and grommets, supplied separately (classification and rate) | Heading 4016; GST 18% (CGST 9% + SGST 9%) Not classifiable under 84249000 at 12%. The ruling is confined to these parts when supplied separately; complete sprinkler/drip systems including laterals remain within Entry 195B at 12%. |
The Authority ruled that the rubber rings/gaskets/seals, foot batten washers and grommets manufactured and supplied by the applicant are classifiable under **Chapter Heading 4016** and attract **GST at 18% (CGST 9% + SGST 9%)**. It held that these parts, when supplied separately, are not covered by Entry 195B of Notification 01/2017 and so do not qualify for the 12% rate.
Reasoning
The Authority relied on the Section XVI note 1(a), which excludes articles of a kind used in machinery or for other technical uses, of vulcanized rubber other than hard rubber, and held that the applicant's items therefore fall under heading 4016. It then examined Entry 195B of Schedule II to Notification 01/2017 (inserted by Notification 06/2018), read with Circular 81/55/2018-GST dated 31.12.2018, which covers sprinklers and drip irrigation systems including laterals at 12%. It held that this entry covers complete systems only, so separately supplied rubber parts fall outside it even though they are used solely in such systems. The order also records the jurisdictional officer's contrary view that the items fall under 84249000 at 12%, which the Authority did not accept.
Provisions relied on
- Section 97(2)(a) of the CGST/SGST Act, 2017 (classification ruling)
- Section 99 and Section 100 of the CGST/RGST Act, 2017 (appeal to Appellate Authority within 30 days, as noted on the order)
- Section XVI, Note 1(a) of the HSN (Chapter 84 scope exclusion for vulcanized rubber articles, heading 4016)
- Entry 195B of Schedule II to Notification No. 01/2017-CT(Rate) dated 28.06.2017, inserted by Notification No. 06/2018 dated 25.01.2018
- Circular No. 81/55/2018-GST dated 31.12.2018, paragraph 4
- HS heading 4016 and HS heading 8424 / subheading 84249000 (as cited in the order)
For the practitioner
This ruling helps suppliers of standalone rubber sealing parts for irrigation equipment, who should expect 18% rather than 12% on those parts when sold separately. It confirms that the 12% rate under Entry 195B and Circular 81/55/2018-GST applies to complete sprinkler/drip systems including laterals, not to their individual rubber components. It does not decide the rate for parts sold as part of a complete system, and it is an advance ruling binding only on the applicant. The order does not show that the Section XVI Notes 2 and 3 or Chapter 84 Note 2, which the question mentions, were analysed in detail.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/raj.aar-2019-20_02-laxmi_rubber_ind.pdf
Legibility of the scan, as read: high.
Prepared 02-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
