This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The company made and sold sprinkler parts such as C-clamps, latch clamps and riser pipes.
- The company asked whether these parts fall under heading 8424 and what GST rate applies.
- The authority held the 12% concession under Entry 195B covers only the complete system with laterals.
- Standalone parts supplied separately are outside Entry 195B, so the 12% rate does not apply to them.
- The order does not decide the correct heading or rate for standalone parts.
In short
A GST advance ruling is a decision a tax authority gives on one business's question before it is acted on, and it binds only that business. Here, the company made metal parts used only in sprinkler and drip irrigation systems, and sold them one at a time rather than as a full system. The question was whether the lower 12% GST rate, which the government gave to sprinkler systems, also covered those single parts.
What has changed
How it worked before
The position on single sprinkler parts was unsettled. The government's concession for sprinkler and drip systems was written for the system as a whole, so it was not clear whether separately sold parts could claim it.
What has changed
The authority held that the 12% concession under Entry 195B applies to the complete sprinkler or drip system, including laterals. Metal parts supplied separately fall outside that entry, so the 12% rate does not apply to them. The order does not say which heading or rate should apply to those parts instead, so that question is still open.
Who this affects
Manufacturers, traders and sellers of standalone sprinkler or drip irrigation parts, such as clamps, battens, riser pipes and rivets, who sell them without the full system.
An example
A trader in Jaipur sells only C-clamps and foot battens to farmers who assemble their own systems. He asks whether the 12% rate for sprinkler systems applies to these clamps when he sells them alone. Under this ruling, the 12% concession covers the complete system, not single parts sold separately. The ruling suggests he should not charge 12% on those clamps by relying on this order, but it does not tell him which rate is correct.
What you should do
If you sell only parts, do not assume the 12% rate applies because the complete system attracts it. This ruling binds only the company that asked and its own tax office, so it is not automatically the law for you. Check the full order and discuss your product mix with your tax adviser before you set your rate, and note that the order mentions a 30-day window to appeal.
If you do nothing
If you charge 12% on standalone parts because you assume this concession covers them, a tax officer may treat the rate as wrong and demand the difference. You may also face interest and penalties on the shortfall. Relying on a ruling that was not made for your business is a risk you carry yourself.
The terms explained
- advance ruling
- A decision a GST authority gives in answer to one business's question about how a tax applies to its own activity. It binds only that business and its tax office.
- heading 8424
- The classification code under which sprinklers and similar spraying equipment are grouped for GST and customs purposes. Goods are placed under a heading to decide which rate applies.
- Entry 195B
- An entry in the government's GST rate schedule that gives a 12% concessional rate to sprinkler and drip irrigation systems, including laterals.
- laterals
- The pipes or tubes that carry water from the main line to the sprinklers or drip points in an irrigation system.
- concessional rate
- A tax rate lower than the standard rate, granted by the government to a specific group of goods or services.
The ruling in detail
Authority for Advance Ruling
M/s Laxmi Agrotech Steel, H-85, Road No. 5A, RIICO Bindayaka, Jaipur, Rajasthan 302012
Advance Ruling No. RAJ/AAR/2019-20/03, dated 16.04.2019 (Rajasthan Authority for Advance Ruling; copy F.No. AAR/Laxmi-Agrotech/2018-19/03-12 dated 08.04.2019) · Rajasthan
Questions before the authority
- Whether parts of a sprinkler system, namely Latch Clamp, C-Clamp, Foot Batten, Riser Pipe, Aluminum Rivet and Mini Sprinkler Rod, which are exclusively meant for use in sprinklers and drip irrigation systems but are sold in isolation as parts and not as a complete system, fall under heading 8424.
- What tax rate applies to such components when sold separately and not as part of a sprinkler or drip irrigation system.
Facts
The applicant manufactures and trades metal parts of sprinkler irrigation systems, including C-clamps, latch clamps, foot battens, riser pipes, aluminium rivets and mini sprinkler rods. The parts are made of iron sheet, GI pipe, aluminium wire and iron rod, and the applicant says they can be used only in sprinkler or drip equipment. They are sold to sprinkler manufacturers, sprinkler parts sellers, traders and consumers for use in their own sprinkler systems.
Ruling
| Question | What the authority ruled |
|---|---|
| Standalone metal parts (Latch Clamp, C-Clamp, Foot Batten, Riser Pipe, Aluminium Rivet, Mini Sprinkler Rod) sold separately | **Not covered under Entry No. 195B** of Schedule II of Notification 01/2017 (12% rate not available) The order does not state the HSN heading or the applicable GST rate for these parts when sold separately. The jurisdictional officer's view (heading 84249000, taxable at 12%) is recorded in the order but is not adopted in the ruling. |
The authority held that the metal parts manufactured and supplied by the applicant are **not covered under Entry No. 195B** of Schedule II of Notification No. 01/2017 dated 28.06.2017, so the 12% concessional rate under that entry does not apply to them. It reasoned that the 12% rate covers the complete sprinkler or drip irrigation system including laterals, and that individual metal parts supplied separately fall outside it. The order does not state an HSN code or a substitute rate for standalone parts.
Reasoning
The authority read Entry 195B, which covers sprinklers and drip irrigation systems including laterals under heading 8424, together with Circular No. 81/55/2018-GST dated 31.12.2018. Paragraph 4 of that circular says a sprinkler system consisting of nozzles, laterals and other components attracts 12%. The authority confined this to the complete system and held in its findings that individual metal parts supplied separately are not covered by the entry. It therefore ruled that the applicant's parts fall outside Entry 195B, although the order does not expressly decide their correct heading or rate.
Provisions relied on
- Section 97(2)(a) of the CGST/SGST Act, 2017 (classification of goods or services)
- Section 100 of the CGST/SGST Act, 2017 (appeal to the Appellate Authority within 30 days, as noted in the order)
- Notification No. 01/2017 dated 28.06.2017, Schedule II, Entry No. 195B (inserted vide Notification No. 06/2018 dated 25.01.2018), covering heading 8424 sprinklers and drip irrigation systems including laterals
- Circular No. 81/55/2018-GST dated 31.12.2018, paragraph 4
For the practitioner
A practitioner dealing with sprinkler or drip irrigation spare parts can cite this ruling for the position that the 12% concession under Entry 195B reaches only the complete system including laterals, not standalone metal components sold separately. It does not decide the correct heading or rate for standalone parts, and the jurisdictional officer's suggestion of heading 84249000 at 12% is not adopted, so that question remains open. The ruling is binding only on the applicant, and the reader should check the full order before relying on it for a different product mix.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/raj.aar-2019-20_03-laxmi_agrotech_steel.pdf
Legibility of the scan, as read: high.
Prepared 02-11-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
