Talk to an expert

Tell us what you need and we will call you back.

🇮🇳 +91

    GST on zinc electroplating job work: 6% or 9% advance ruling

    Tamil Nadu authority ruled that zinc electroplating on customer-owned parts is a service taxed at 6% or 9%, depending on the owner's GST registration and date.

    Ruling
    ORDER No.06 /AAR/2020 DATED: 31.01.2020
    Dated
    Authority
    Authority for Advance Ruling

    Read the original order (opens in a new tab)

    Add Patron Accounting as a preferred source on Google

    This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.

    The short version

    1. A Chennai electroplating firm asked whether its zinc plating counts as goods, services or both.
    2. The authority held it is a service under heading 9988, the code for manufacturing services on others' goods.
    3. Up to 30.09.2019 the rate was 9% CGST and 9% SGST, whatever the owner's status.
    4. From 01.10.2019, the rate is 6% plus 6% for registered owners, and 9% plus 9% for unregistered owners.
    5. The ruling binds only the applicant and its own tax office.

    In short

    Electroplating firms often ask whether plating a customer's parts is selling goods or providing a service, and what GST rate applies. This Chennai firm plates components sent by customers, returns them, and bills a service charge. The question was whether that is a service, which code it falls under, and what rate applies.

    What has changed

    How it worked before

    The position was not settled for many job-work plating businesses. Many billed plating charges at the general service rate without separating out whether the owner was registered. Some treated the work as a sale of goods, which changes the invoice and the tax treatment.

    What has changed

    The authority held that treating another person's goods is a service, so the plating charge is a service under heading 9988. The rate was 9% CGST and 9% SGST up to 30.09.2019. From 01.10.2019 it is 6% CGST and 6% SGST where the goods belong to a registered person, and 9% CGST and 9% SGST where they belong to an unregistered person. In practice, a plating firm must check its customer's registration status and bill at the matching rate.

    Who this affects

    Job-work platers and metal finishers in the automobile, general engineering and electrical sectors who plate customer-supplied components on the customer's specification. It is most relevant to firms whose customers send goods on a delivery challan and who return the finished parts.

    An example

    A Pune firm plates brackets for a registered auto-parts maker and bills 9% GST because it never checked the customer's status. The firm asks whether the 6% rate after 01.10.2019 applies. The ruling suggests that for goods belonging to a registered person the rate is 6% plus 6%, so the firm may have overcharged. It should confirm the position with its tax adviser before correcting any invoices.

    What you should do

    Compare your own plating work with the facts in the ruling: customer-owned goods, customer specification, return after plating. This ruling binds only Electroplating And Metal Finishers and its own tax office, so it is not automatically law for your business. Confirm the rates in current notifications with your tax adviser before billing, and make sure your invoice shows the correct service code.

    If you do nothing

    If you assume this ruling covers you when your facts differ, your tax officer may apply a different rate or service classification and demand the shortfall with interest. Billing 9% to a registered customer after 01.10.2019 can mean overpaying tax, while billing too low can mean underpaying it. Either way, the correction can require amended invoices and returns.

    The terms explained

    Advance ruling
    A written decision by a tax authority on a business's own question before it acts. It binds only the business that asked and its own tax office.
    Job work
    Work done on another person's goods, where the goods are sent for processing and returned to their owner. Here the plating is done on the customer's parts.
    SAC (Services Accounting Code)
    The code printed on an invoice to show which kind of service is being billed. The ruling places this plating under code 9988.
    Delivery challan
    A document sent with goods when they leave for processing or movement, without being a sale. The customer's parts travelled to the firm on one.
    Electroplating (zinc plating)
    Coating a metal part with a thin layer of zinc to protect it from rust. It is the process this ruling classifies as a service.

    The ruling in detail

    Authority for Advance Ruling

    Electroplating And Metal Finishers

    ORDER No.06 /AAR/2020 DATED: 31.01.2020 · Tamil Nadu

    Questions before the authority

    • Whether the activity of zinc electroplating (platting) done by the applicant on customer-owned material, per customer specification, is a supply of goods or services or both within the meaning of the GST Act.
    • What is the rate of GST applicable on the platting service?
    • What is the SAC for the platting service?

    Facts

    The applicant is a partnership firm in Ambattur Industrial Estate, Chennai, doing zinc electroplating for customers in the automobile, general engineering and electrical and electronics sectors. Customers send components under delivery challan, marked as outward job work in the e-way bill. The applicant acid-cleans and plates the components to customer specification, returns them after quality check, and raises an invoice for the service, describing it as 'Zinc Plating' under the code printed as 998898 (the order treats the correct code as 9988).

    Ruling

    QuestionWhat the authority ruled
    Whether the platting activity is a supply of goods or servicesSupply of service
    Treatment or process applied to another person's goods under Schedule II, para 3; also job work under Section 2(68).
    SAC for plattingHeading 9988 (manufacturing services on physical inputs owned by others)
    The order treats the electroplating as a portion of the customer's manufacturing process.
    Rate of tax for the period up to 30.09.20199% CGST and 9% SGST
    Entry 26 of Notification 11/2017-C.T.(Rate), as amended; applies whether goods are owned by registered or unregistered persons.
    Rate of tax from 01.10.20196% CGST and 6% SGST where goods belong to a registered person; 9% CGST and 9% SGST where goods belong to an unregistered person
    6% under entry 26(id) as inserted by Notification 20/2019-C.T.(Rate) dated 30.09.2019; 9% under entry 26(iv).

    The electroplating activity is a supply of service, classifiable under heading 9988 (manufacturing services on physical inputs owned by others). Up to 30.09.2019, the rate is 9% CGST and 9% SGST irrespective of whether the goods belong to registered or unregistered persons. From 01.10.2019, the rate is 6% CGST and 6% SGST where the goods belong to a registered person, and 9% CGST and 9% SGST where they belong to an unregistered person.

    Reasoning

    The authority held that treatment of another person's goods is a supply of services under Para 3 of Schedule II, and that the work is job work under Section 2(68) because it is done on goods of another registered person. Since electroplating is a portion of the customer's manufacturing process and the output is not owned by the applicant, it falls under heading 9988 as outsourced manufacturing services. The rate was traced through entry 26 of Notification 11/2017-C.T.(Rate), as amended by Notifications 20/2017, 31/2017, 01/2018 and 20/2019. The 2019 amendment introduced the 6% rate for job work on goods of registered persons, relying on the GST Council fitment committee recommendation. The TN SGST position follows the parallel notification G.O. (Ms) No. 72.

    Provisions relied on

    • Section 2(68) of the CGST Act (definition of job work)
    • Para 3 of Schedule II of the CGST Act (treatment or process applied to another person's goods is a supply of services)
    • Notification No. 11/2017-C.T.(Rate) dated 28.06.2017, entry 26 (heading 9988), as amended
    • Notification No. 20/2017-C.T.(Rate) dated 22.08.2017
    • Notification No. 31/2017-C.T.(Rate) dated 13.10.2017
    • Notification No. 01/2018-C.T.(Rate) dated 25.01.2018
    • Notification No. 20/2019-C.T.(Rate) dated 30.09.2019, entry 26(id)
    • Notification No. II(2)/CTR/532(d-14)/2017, G.O. (Ms) No. 72 dated 29.06.2017 (Tamil Nadu SGST, as amended)
    • Section 98 of the CGST Act (advance ruling)
    • Rule 104 of the CGST Rules 2017 (application fee)

    For the practitioner

    A practitioner doing electroplating or similar job work on customer-owned goods can use this order to support a supply-of-service classification under heading 9988, with the rate split by the status of the goods owner. The rate is 9% for the whole period to 30.09.2019, and from 01.10.2019 it is 6% for goods of registered persons and 9% for unregistered owners. The order is an advance ruling binding only on the applicant, and it does not decide the input tax credit position, the place of supply, or the treatment of any goods that are not owned by the principal.

    Source

    This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.

    Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn_aar_06_2020_31.01.2020_e_mf.pdf

    Legibility of the scan, as read: medium.

    Prepared 17-11-2026.

    About Patron Accounting LLP

    Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.

    Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.

    We operate from five offices and serve clients across the rest of India remotely:

    • Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
    • Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
    • Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
    • Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
    • Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009

    If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.

    More in Advance rulings (AAR)

    All Advance rulings (AAR) →

    Does this ruling mean my plating charges are automatically taxed at 6%?

    No. The 6% rate in the ruling applies to the applicant's facts, and only where the goods belong to a registered person. Check your customer's registration and the current notifications before applying it to your invoices.

    What rate applies if my customer is not registered for GST?

    The ruling says 9% CGST and 9% SGST applies where the goods belong to an unregistered person, from 01.10.2019. Before that date, the rate was 9% plus 9% whatever the owner's status.

    Can I use this ruling to support my own service classification?

    You can cite it as a reasoned position, but it is not binding on your tax office. If your facts match the ruling closely, it gives you a basis for discussion with your officer.

    What if my tax officer disagrees with this ruling?

    The ruling does not bind your tax officer. If the officer takes a different view, your tax adviser can help you respond and, where needed, seek an advance ruling of your own under the same section.

    Does the ruling say anything about input tax credit?

    No. The ruling expressly does not decide the input tax credit position, the place of supply, or the treatment of goods not owned by the principal. Those points need separate advice.