This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- Engines made solely and principally for railway or locomotive use fall under HSN Heading 8408, not 8607.
- Recovering shared input service costs from other registered units is a taxable GST supply.
- Value for such recoveries is set under Rule 30 of the CGST Rules, not a nominal amount.
- Once credit is distributed to distinct units, the company must register as an Input Service Distributor (ISD).
In short
Cummins India Limited (order NO.GST-ARA-66/2018-19/B-162, Mumbai, 19 December 2018) asked the Maharashtra GST advance ruling authority to settle four questions. It was a company that makes diesel engines, some built to railway designs. Its head office in Pune took GST input tax credit on shared services and charged the cost to its other registered units. The company wanted to know which tariff heading applied to its railway engines, whether that charge was a taxable supply, how to value it, and whether it had to register as an Input Service Distributor.
What has changed
How it worked before
The company was unsure which heading applied to engines built for railway use, and the question of whether such engines fall under the railway-parts chapter was open. Companies with several GST registrations were also unclear whether charging shared input credit costs to sister units was a taxable supply, and how to value it.
What has changed
The authority held that engines made solely and principally for railway and locomotive use fall under HSN Heading 8408. It also held that recovering shared input service costs from distinct-person units is a supply that attracts GST, valued under Rule 30 of the CGST Rules, 2017. Finally, it held that once credit is distributed to such units, the head office must register as an Input Service Distributor under Section 24 of the CGST Act. In practice, a company with several registrations that passes shared credit to its units should expect to pay GST on that recovery and to register as an ISD.
Who this affects
Manufacturers of engines or parts sold for railway or locomotive use, and companies with several GST registrations in different states where one unit pays shared input services and recovers the cost from the others.
An example
A small engine maker in Gujarat supplies engines to a locomotive builder, and its Delhi unit also sells standard industrial engines. The company would ask whether its railway-only engines fall under the same heading as its other engines, and whether the cost it recharges from its head office to the Delhi unit is taxable. This ruling suggests that railway-only engines can fall under Heading 8408 and that inter-unit recharges of shared credit are taxable, but the maker would need its own ruling or advice on its own products.
What you should do
Check whether your engines or parts are made only for railway use before relying on the Heading 8408 finding, because the authority decided that point on the company's facts. If you recover shared input credit from sister units, review the ISD requirement and the Rule 30 valuation with your advisor. This is an advance ruling: it binds only Cummins India Limited and its own tax office, so it is not automatically the law for your business. Appeal against it lies to the Maharashtra Appellate Authority.
If you do nothing
If you assume this ruling covers your product or your recharges, a tax officer may treat the same items under a different heading or ignore your ISD position, and demand tax with interest. Recovering shared credit without GST or without ISD registration can lead to a demand for the tax you did not pay, plus interest and penalty. Correcting it later costs more than getting the question checked now.
The terms explained
- Input tax credit
- The GST already paid on goods or services a business buys, which it can set off against the GST it owes on its own sales.
- Input Service Distributor (ISD)
- A registration that lets a head office receive input service credit on shared services and pass that credit on to its other registered units.
- Distinct person
- A separately registered unit of the same business, treated as a separate taxpayer for GST even though it belongs to the same company.
- HSN heading
- A standard code, from the Harmonised System of product classification, that decides which tax rate and rules apply to a product.
- Advance ruling
- A binding decision by a GST authority on one business's own question, which applies only to that business and its own tax office.
The ruling in detail
Authority for Advance Ruling
Cummins India Limited
NO.GST-ARA-66/2018-19/B-162, Mumbai, dated 19.12.2018 · Maharashtra
Questions before the authority
- Whether engines manufactured and supplied solely and principally for use in railways/locomotives are classifiable under HSN Heading 8408 or under HSN Heading 8607 of the Customs Tariff (borrowed for GST classification) as parts used solely or principally for Railways or Tramway Locomotives or Rolling Stock?
- Whether availment of input tax credit on common input supplies on behalf of other units registered as distinct persons, and further allocation of the cost incurred for the same to those units, qualifies as a supply and attracts GST?
- If GST is leviable, whether the assessable value can be determined by arriving at a nominal value?
- Once GST is levied and ITC is availed by the recipient unit, whether the applicant is required to register itself as an Input Service Distributor (ISD) for distribution of ITC on common input supplies?
Facts
Cummins India Limited manufactures diesel engines and parts, and some engines are made to railway or locomotive manufacturers' designs for use only in railway locomotives. The company has multiple GST registrations across states, and its Pune head office procures common input services, takes the ITC, and recovers the cost from other registered units. The applicant asked whether this inter-unit recovery is a taxable supply, how it should be valued, and whether it must register as an ISD.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of railway/locomotive engines (HSN 8408 or 8607) | Classifiable under HSN Heading 8408 Engines are not 'parts' of Chapter 86 goods. Section XVII Note 2(e) excludes machinery of headings 8401 to 8479 from 'parts', and Heading 8607 does not cover engines of any type. |
| Whether ITC availed on common input supplies for other distinct-person units, with cost allocation, is a supply attracting GST | Yes The units are distinct persons under Section 25, so the inter-unit supply falls within Section 7 read with Schedule I, entry 2, even without consideration. |
| Whether assessable value can be fixed by arriving at a nominal value | No. Value is to be determined under Rule 30 of the CGST Rules, 2017 Rule 30 applies because cost of production is available. The value is 110% of cost of production or manufacture, so the applicant's nominal-value request was not accepted. |
| Whether applicant must register as an Input Service Distributor once ITC is distributed | Yes. Registration as ISD is required under Section 24 Section 24(viii) makes an Input Service Distributor compulsorily registrable, so ISD registration is not an optional facility. |
The authority held that the engines manufactured and supplied solely and principally for railway and locomotive use are classifiable under **HSN Heading 8408**, not 8607. It held that availment of ITC on common input services for distinct-person units and the related cost allocation is a **supply attracting GST**. It held that the value is to be determined under **Rule 30 of the CGST Rules, 2017**, not by a nominal value. It held that once the ITC is distributed, the applicant **must register as an ISD** under Section 24.
Reasoning
On classification, the authority read Section XVII Note 2(e) as excluding compression-ignition engines of heading 8401 to 8479 from 'parts', and noted that Chapter 86 Note 2 does not list engines under Heading 8607. It also relied on the different weight-based and number-based assessment of the two headings. On the inter-unit recovery, it held that Section 25 makes each registration a distinct person and that Section 7 with Schedule I, entry 2 treats such supplies as taxable. For value, it held that Rule 28 and Rule 31 could not apply because no open-market value existed, so Rule 30 governs. On ISD, it read Section 24(viii) as mandatory where credit is to be distributed to distinct persons.
Provisions relied on
- Section 7 of the CGST Act, 2017 and Schedule I, entry 2
- Section 24(viii) of the CGST Act, 2017
- Section 25 (including 25(4)) of the CGST Act, 2017
- Section 17 of the CGST Act, 2017
- Section 20 of the CGST Act, 2017
- Rule 28, Rule 30 and Rule 31 of the CGST Rules, 2017
- Section XVII Note 2(e) and Note 3 of the Customs Tariff (borrowed for GST classification)
- Chapter 86 Note 2 of the Customs Tariff
- Circular No. 30/4/2018-GST dated 25 January 2018 (discussed in the order)
For the practitioner
This ruling is useful for manufacturers of engines or parts sold for railway use, since it places such engines under Heading 8408 and not Chapter 86, which affects the GST rate. It also confirms that inter-unit recovery of common input service costs between distinct-person registrations is a taxable supply valued under Rule 30, and that ISD registration is mandatory for such distribution. It does not decide whether a sole-use argument could succeed for a different product, and it is an advance ruling binding only on the applicant, with appeal lying to the Maharashtra Appellate Authority.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/ara_order_66_2018_maharashtra_cil.pdf
Legibility of the scan, as read: medium.
Prepared 28-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
