This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- Brakes India Private Limited asked which GST rate applies to its disc brake pads.
- Pads are friction material bonded to a steel backing plate, then cured into one piece.
- The authority held they are motor vehicle parts under Heading 8708, not friction material under Heading 6813.
- Intra-state supply attracts 14% CGST and 14% SGST, a combined 28% GST.
- The ruling binds only Brakes India Private Limited and its own tax office.
In short
GST on disc brake pads depends on whether the friction material is sold loose or fixed to a metal plate. Brakes India Private Limited, a maker of auto components, asked which of two GST rates applies to its pads. The company's pads are friction material bonded and pressed onto a steel backing plate, and sold as a complete assembly.
What has changed
How it worked before
The position was not settled. Some sellers treated friction material as a general product under Heading 6813 at 18%, while others treated pads as vehicle parts at a higher rate. Businesses had no single clear rule for bonded pads.
What has changed
The authority held that a friction lining fixed to a metal plate with cavities is a mounted lining, which is a motor vehicle part. It therefore falls under Heading 8708 and Sl. No. 170 of Schedule IV, at 14% CGST and 14% SGST. The authority rejected the argument that Sl. No. 182B of Schedule III applied, so the 18% rate was not accepted for these pads. In practice, a bonded disc brake pad sold as a motor vehicle part should be taxed at the higher combined rate.
Who this affects
Manufacturers and sellers of disc brake pads or brake linings bonded to a metal backing plate, especially those supplying auto makers or tractor makers. Sellers of loose friction material, or pads without a metal backing plate, have a different question that this ruling does not answer.
An example
A small company in Coimbatore bonds friction material onto steel plates and sells them as disc brake pads to a light vehicle maker. It asks whether it should charge 18% or 28% GST on those pads. The ruling suggests that, where the pads are bonded to a metal plate and sold as a motor vehicle part, the answer is the 28% combined rate. The company should still confirm that its own product matches these facts.
What you should do
Check whether your pads are bonded to a metal backing plate and sold as a fitted part, since the ruling depends on those facts. Compare your product with the facts in the order before changing your rate, and ask a tax adviser if you are unsure. This is an advance ruling, which binds only Brakes India Private Limited and its own tax office. It is persuasive for other businesses, but it is not automatically the law for you.
If you do nothing
If you charge 18% on pads that match this ruling, a tax officer may treat the shortfall as underpaid GST. You could then owe the difference, along with interest and possibly a penalty. Reading this ruling as covering you without checking your product's facts is the main risk.
The terms explained
- advance ruling
- A decision by a tax authority, given in advance, on how the law applies to one business's specific question. It binds only the business that asked and its own tax office.
- HSN
- The Harmonised System of Nomenclature, an international product code system. Indian tax classification uses it to decide which heading a product belongs to.
- mounted brake lining
- Friction material fixed to a metal backing plate, which is the form used in disc brake pads. The ruling treats this as a motor vehicle part rather than loose friction material.
- tariff heading
- A numbered category in the customs tariff that groups similar goods. The heading a product falls under decides which GST rate applies to it.
- CGST and SGST
- Central GST and State GST. For a sale within one state, the total GST is split equally between these two taxes.
The ruling in detail
Authority for Advance Ruling
M/s. M/s. Brakes India Private Limited, MTH Road, Padi, Chennai 600 050
ORDER No.7/AAR/2018 DATED 30.08.2018 · Tamil Nadu
Questions before the authority
- What is the appropriate classification of 'Disc Brake Pads' under GST, and whether 'Disc Brake Pads' supplied by the Applicant are covered under Sl. No. 170 of Schedule IV of Notification 1/2017 (Tariff Heading 8708, GST at 28%) or under Sl. No. 182B of Schedule III of the Rate Notification (Tariff Heading 6813, GST at 18%)?
Facts
The applicant manufactures auto components, including disc brake pads, for light and commercial motor vehicles and agricultural tractors. Each disc brake pad consists of a friction material bonded to a steel backing plate with adhesive, then pressed, heated and cured so that the friction material extrudes into cavities in the plate and forms one integrated piece. The sample invoices describe the goods as 'KIT PAD Assembly, Disc Brake' and classify them under 87083900.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of Disc Brake Pads (Heading 8708 or 6813) and applicable GST rate | **Heading 8708 (87083000)**, 14% CGST and 14% SGST Covered under Sl. No. 170 of Schedule IV of Notification 01/2017 CT (Rate) and Sl. No. 170 of Schedule IV of G.O. (Ms) No. 62 dated 29.06.2017. The ruling does not separately address the Sl. No. 182B / Heading 6813 rate, since the product is held to be mounted and therefore excluded from 6813. |
The authority held that disc brake pads manufactured and supplied by the applicant are classifiable under Heading 8708 (87083000) as parts of motor vehicles. They fall under Sl. No. 170 of Schedule IV of Notification 01/2017 CT (Rate) and the corresponding State notification, attracting **14% CGST and 14% SGST** for intra-state supply. The authority held that the mounted friction material is excluded from Heading 6813.
Reasoning
The authority applied Explanations (iii) and (iv) to Notification 1/2017 CT (Rate), which import the Customs Tariff classification framework and the General Explanatory Notes. Heading 6813 covers friction material 'not mounted', but the HSN Explanatory Notes to 6813 expressly exclude mounted brake linings, including friction material fixed to a metal plate with circular cavities for disc brakes. Because the pad is bonded to a steel backing plate with cavities, it is a mounted lining. The HSN Explanatory Notes to Heading 8708 include brakes (shoe, segment, disc, etc.) and mounted linings among parts of motor vehicles, so the product falls under 8708.
Provisions relied on
- Notification No. 1/2017 CT (Rate) dated 28.06.2017, Schedule IV, Sl. No. 170, and Explanations (iii) and (iv)
- G.O. (Ms) No. 62 dated 29.06.2017 (Tamil Nadu), Schedule IV, Sl. No. 170
- Notification Sl. No. 182B of Schedule III of the Rate Notification (considered and rejected)
- Customs Tariff Act, 1975, First Schedule, Chapter Headings 6813 and 8708, and the General Explanatory Notes
- HSN Explanatory Notes to Heading 6813 (exclusion (b) for mounted brake linings) and Heading 8708 (brakes and mounted linings)
- Section 98 and Section 100 of the CGST/TNGST Act, 2017 (appeal and procedure references)
- Rule 104(1) of the CGST Rules, 2017 and SGST Rules, 2017 (application fee)
For the practitioner
This ruling helps manufacturers of disc brake pads that are supplied as a friction lining bonded to a backing plate, as it places them in Heading 8708 at 14% CGST and 14% SGST. Practitioners can use it to resist attempts to classify such pads under Heading 6813 at 18%. It does not decide the classification of unmounted friction material or of pads supplied without a metal backing plate. The order is also binding only on the applicant under the advance ruling provisions. Readers should check the scan for the exact rate and notification numbers, since some digits in the ruling section are hard to read.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn.7_aar_2018-bipl.pdf
Legibility of the scan, as read: medium.
Prepared 23-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
