This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The company asked which GST heading applies to its steel silent and roller chains for engines.
- The authority ruled the chains fall under heading 7315, not heading 8409 for engine parts.
- The reason: they are articulated link chains, treated as parts of general use.
- The ruling covers only this company's own products, facts and Tamil Nadu tax office.
- The company that asked can appeal to the State Appellate Authority within 30 days.
In short
Goods and Services Tax (GST) puts different products under different codes, called headings, and each heading carries its own tax rate. A company making timing and transmission chains for two-wheeler and four-wheeler engines asked which heading its chains belong to: engine parts under 8409, or chains of iron or steel under 7315.
What has changed
How it worked before
The position was unsettled. The company first classified its chains as engine parts under 8409, which carried 28% GST. After customer pressure and industry discussions, it switched to 7315 and charged 18% GST from 20.12.2017, so the question was open across the industry.
What has changed
The authority held that these chains are articulated link chains, which fall under 7315. They are not parts suitable for engines under 8409. Because they are parts of general use, they are excluded from Chapter 84 by Section XVI Note 1(g) of the Customs Tariff. In practice, a maker of similar steel chains has a clear Tamil Nadu view that 7315 is the right heading. The ruling deals with the heading only, not the tax rate.
Who this affects
Manufacturers of steel timing chains, transmission chains, silent chains or roller chains used in petrol or diesel engines, for two-wheelers or four-wheelers.
An example
A small firm in Coimbatore makes roller chains for scooter engines and has been charging 28% GST as engine parts. Its owner asks whether the same reasoning applies to her chains. The ruling suggests that steel articulated link chains driven by sprockets belong under 7315, so she may have a case to reclassify. She should still check her own product against the ruling and confirm with her tax officer or an adviser before changing anything.
What you should do
Compare your product with the one in this ruling: steel chains, driven by sprockets with no other assembly, for engines. A ruling is not automatically law for you. It binds only the company that asked and its own tax office, so it is persuasive but not binding on your business or your state. If your product differs, or your tax officer takes a different view, get a ruling for your own product or professional advice before you change your classification.
If you do nothing
If you assume this ruling covers you and it does not, your tax officer may classify your chains under 8409 and demand the tax you did not pay, which could be the difference between 28% and 18%. Interest and penalties can be added on top. Because the ruling binds only the company that asked, relying on it without checking can leave you with a large bill.
The terms explained
- advance ruling
- A written decision from a GST authority, given in advance, on how a business's specific question should be treated. It binds only the business that asked and its own tax office.
- heading 8409
- The GST and customs code for parts suitable for use with engines. The authority held that these chains do not fall here.
- heading 7315
- The code for chains and parts of chains made of iron or steel. The authority held that these chains fall here.
- parts of general use
- Parts that can be used across many kinds of machines, not only one. Under Section XVI Note 1(g), such parts are excluded from Chapter 84 engine goods.
- articulated link chain
- A chain made of linked pieces that bend at each joint, such as roller chains and silent chains. The authority treated these chains as falling under 7315.
The ruling in detail
Authority for Advance Ruling
M/s. Borgwarner Morse Systems India Private Limited
ORDER No. 17 /AAR/2018 DATED : 29.10.2018 · Tamil Nadu
Questions before the authority
- Whether automotive chains (i.e., silent chains used in petrol engines and roller chains used in diesel engines) manufactured by the applicant are classifiable under HSN 8409 or 7315?
Facts
The applicant manufactures automotive timing and transmission chains of iron or steel, namely silent (inverted tooth) chains for petrol engines and roller chains for diesel engines, for two-wheeler and four-wheeler engines. It first classified them under HSN 8409 as engine parts, which attracted 28% GST, but after customer pressure and industry deliberations it reclassified them under HSN 7315 and charged 18% GST from 20.12.2017. The applicant sought a ruling on the correct heading.
Ruling
| Question | What the authority ruled |
|---|---|
| Classification of automotive chains manufactured by the applicant (silent chains for petrol engines and roller chains for diesel engines): HSN 8409 or 7315? | Roller chains: CTH 73151100. Inverted tooth (silent) chains: CTH 73151290. Both are under heading 7315, not 8409. The ruling covers the applicant's products as described in its technical write-up. Classification is under the Customs Tariff as applicable to GST per Explanation (iii) to Notification 1/2017-Central Tax (Rate) dt. 28.06.2017 and G.O. Ms No. 59 dt. 29.06.2017. The order does not itself state the GST rate. |
The Authority held that the chains are articulated link chains falling under Chapter 7315 and are not parts suitable for engines under heading 8409. It ruled that roller chains are classifiable under CTH 73151100 and inverted tooth (silent) chains under CTH 73151290 of the Customs Tariff as applied to GST. The chains are 'parts of general use' excluded from Chapter 84 by Section XVI Note 1(g).
Reasoning
The Authority examined the technical write-up and found the products to be transmission chains of steel, articulated link chains driven by sprockets with no other assembly. Under the HSN explanatory notes to heading 7315, articulated link chains such as roller chains and inverted tooth (silent) chains are included irrespective of their intended use. Although the chains form part of internal combustion engines under Chapters 8407 and 8408, they are 'parts of general use' as defined in Note 2(a) to Section XV, which Section XVI Note 1(g) excludes from Chapter 84. The heading 8409 classification was therefore rejected.
Provisions relied on
- Section 98 of the CGST Act, 2017 (advance ruling)
- Section 100(1) of the CGST/TNGST Act, 2017 (appeal to the State Appellate Authority within 30 days)
- Notification No. 1/2017-Central Tax (Rate) dt. 28.06.2017, Explanations (iii) and (iv)
- G.O. Ms No. 59, Commercial Taxes and Registration (B1) dt. 29.06.2017
- First Schedule to the Customs Tariff Act, 1975 (headings 7315, 8409, Chapter 84)
- Interpretation rules of the First Schedule to the Customs Tariff Act, 1975, including Section and Chapter Notes and General Explanatory Notes
- Section XV Note 2(a) (definition of 'parts of general use')
- Section XVI Note 1(g) (exclusion of parts of general use from Chapter 84)
- HSN Explanatory Notes to heading 7315 and heading 8409
- General Notes to Section XV, Part (C) (parts of articles)
For the practitioner
This ruling is useful for manufacturers of silent and roller chains for engines who face the 8409 versus 7315 question. It gives a clear Tamil Nadu advance ruling that such chains fall under 7315 as parts of general use, which supports the 18% rate position. It does not decide the rate itself, and it does not address chains for other uses or other products. It is an advance ruling on the applicant's own products and facts and can be appealed to the State Appellate Authority within 30 days.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn-17-aar-2018-bmsi.pdf
Legibility of the scan, as read: medium.
Prepared 26-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
