This page was written by Patron Accounting’s AI from the official release and reviewed before publishing. It explains the document in plain language. It is not the document itself. Where this page and the original differ, the original governs.
The short version
- The company asked whether amortised cost of customer-supplied tools, dies and moulds adds to GST value.
- The company asked for withdrawal after CBIC Circular No. 47/21/2018-GST dated 08.06.2018 was issued.
- The authority accepted the withdrawal and dismissed the application without deciding any question.
- The order gives no view on taxable value, invoice format, or GSTR-1, GSTR-3 or GSTR-3B reporting.
In short
A car parts maker asked the Tamil Nadu GST advance ruling authority whether the cost of tools, dies and moulds that its customers supply free should be added to the value of the parts it sells. Under the older Central Excise rules, that cost was spread over the life of the tool and added to the price. The GST law has no equivalent rule, so the question was open. The company later asked to withdraw its application, saying a CBIC circular had already settled the point for it. The authority agreed and closed the case without answering.
What has changed
How it worked before
Under the earlier Central Excise valuation rules, the cost of free tools was amortised over the tool's life and added to the value of the goods. GST has no matching provision, so businesses in this position had no settled rule to follow under the GST law. The position was genuinely unsettled.
What has changed
Nothing was decided. The authority dismissed the application as withdrawn, so the order gives no ruling on whether amortised tool, die or mould costs form part of taxable value. The company said CBIC Circular No. 47/21/2018-GST dated 08.06.2018 clarified the question, including whether free use of customer-owned moulds and dies attracts GST in the recipient's hands. The order does not say what that circular states. Anyone relying on the circular should read it directly.
Who this affects
Auto parts and component makers who produce goods using tools, dies or moulds supplied free of cost by their customers, especially where the customer is an Original Equipment Manufacturer (OEM).
What you should do
Do not treat this order as an answer to your question, because it contains none. A ruling by the Tamil Nadu authority binds only the company that asked and its own tax office, and it is not law for other businesses. If you face this issue, read CBIC Circular No. 47/21/2018-GST and take advice from your tax practitioner on how it applies to your contracts.
If you do nothing
Assuming this order settles the question could lead you to value your supplies one way when the tax officer expects another. Because the order gives no answer, it cannot protect you if the officer disagrees. Any shortfall in GST would then carry interest and possibly penalty, so it is better to settle the treatment with your practitioner before filing.
The terms explained
- advance ruling
- A decision by a GST authority, given in advance, on how the law applies to one business's specific question. It binds only that business and its own tax office.
- amortisation
- Spreading the cost of an asset over its useful life, rather than counting it all at once. Here, the cost of a tool or die is spread across the parts made with it.
- CBIC circular
- A written clarification issued by the Central Board of Indirect Taxes and Customs to tell tax officers and businesses how it reads the law. It is guidance rather than a ruling for one business.
- withdrawn application
- A request that the authority be asked to stop considering a case at the applicant's own choice. The authority then closes the case without deciding the questions raised.
The ruling in detail
Authority for Advance Ruling
M/s Amalgamations Valeo Clutch Private Limited, 89, SIPCOT Industrial Park, Oragadam, Vaippur A Block Village, Sriperumbadur Taluk, Kancheepuram District, Tamil Nadu-602105
ORDER No.5/AAR/2018 DATED 30.08.2018 (the date is handwritten and partly illegible; 30 AUG 2018 is also confirmed by the receipt stamp). The listing reference TN/05/AAR/2018 does not appear in the document. · Tamil Nadu
Questions before the authority
- Whether amortization of the value of free tools, dies or moulds received from the customer is to be included in the valuation of the goods supplied.
- If GST is applicable on the amortized value, what is the procedure for calculating the GST and reflecting it in the GST invoice format.
- How the transactions are to be declared in GSTR-1, GSTR-3 and GSTR-3B.
Facts
The applicant manufactures automobile parts, mainly for Original Equipment Manufacturers who supply the design and specifications. The OEM recipients routinely supply tools, dies and/or moulds free of cost, which the applicant uses in producing the finished parts. Under the earlier Central Excise valuation rules, the cost of such free tools was amortised over the tool's life and added to the value of the goods, but the GST law has no equivalent provision.
Ruling
The authority did not decide the questions on their merits. It dismissed the application as **withdrawn**, because the applicant asked for withdrawal after CBIC Circular No. 47/21/2018-GST dated 08.06.2018 was issued. The applicant said the circular clarified the amortisation question and whether free use of OEM-owned moulds and dies attracts GST in the recipient's hands.
Reasoning
The applicant's letter dated 09.08.2018 referred to the personal hearing of 07.08.2018 and said the amortisation issue had been clarified by CBIC Circular No. 47/21/2018-GST dated 08.06.2018. It then requested that the application be treated as withdrawn. The authority accepted that request and dismissed the application without answering any of the three questions. The order therefore gives no ruling on whether amortised tool or die costs form part of the taxable value.
Provisions relied on
- Section 98 of the CGST Act, 2017 (and the corresponding TNGST provision), under which the advance ruling proceedings were held
- Section 100(1) of the CGST / TNGST Act, 2017 (appeal period of 30 days, referred to in the order's note)
- Rule 104(1) of the CGST Rules, 2017 and the TNGST Rules (application fee of Rs.5,000)
- CBIC Circular No. 47/21/2018-GST dated 08.06.2018 (relied on by the applicant as clarifying amortisation and free moulds and dies)
- Rule 6, Explanation 1, Central Excise Valuation Rules, 2000 (referred to as the earlier regime, not applied)
For the practitioner
This order does not settle the amortisation question, so it cannot be cited as authority for either treatment of free tools, dies or moulds. A practitioner advising on this issue should look to CBIC Circular No. 47/21/2018-GST, which the applicant relied on, and read it directly. The order does help to show that the applicant withdrew its application in reliance on that circular, so it is not a contested ruling. The order does not address GSTR-1, GSTR-3 or GSTR-3B reporting, or invoice format.
Source
This is a summary prepared from the published order, which is a scanned document. It is a reading aid and not the authority: where the two differ, the order governs. Verify every provision against the original before relying on it.
Original order: https://www.gstcouncil.gov.in/sites/default/files/AAR/tn.5_aar_2018-avcpl.pdf
Legibility of the scan, as read: medium. The typed text is clear, but the order number and date are handwritten and only partly legible, and the listing reference does not match the document. The RULING section and the withdrawal reasoning are clearly legible..
Prepared 23-10-2026.
About Patron Accounting LLP
Patron Accounting LLP is a CA and CS-led accounting and compliance firm that has been working with businesses across India since 2019. We handle the work that keeps a company correct with every department it answers to: day-to-day bookkeeping and accounting, GST registration and returns, income tax filing and assessments, TDS, payroll and PF/ESI, company and LLP incorporation, ROC and MCA compliance, statutory and internal audit, physical stock and inventory audits, trademark and other registrations, and the certificates and reports that banks, buyers and regulators ask for.
Our clients range from a first proprietorship registering for GST to established companies running operations across several states. Much of our work is exactly this: reading what a department has published and telling a business, in plain terms, whether it changes anything for them.
We operate from five offices and serve clients across the rest of India remotely:
- Pune (HQ): RTC Silver, B4-708, Sai Satyam Park, Wagholi, Pune, Maharashtra 412207
- Mumbai: 1st Floor, Rajshila Building, 104/597, Jagannath Shankar Seth Rd, Marine Lines, Mumbai 400002
- Delhi: First Floor, Plot No. C-134-A, A-1 Block, Qutub Vihar Phase-1, New Delhi 110071
- Gurugram: 705, 7th Floor, ILD Trade Centre, Sohna Road, Sector 47, Gurugram 122018
- Ahmedabad: Phoenix Tower, 1107, near Commerce Six Road, Drive In Road, Navrangpura, Ahmedabad, Gujarat 380009
If anything on this page affects you and you would like somebody to look at your own position, we are glad to help. Call +91 94594 56700, write to sales@patronaccounting.com, or visit patronaccounting.com. The first conversation costs nothing.
